CX11SM CRYSTAL 16 MHz to 250 MHz Ultra Miniature Surface Mount Quartz Crystal DESCRIPTION When miniaturization is paramount, Statek’s CX11SM AT quartz crystal is an excellent choice. Available in frequencies from 16 MHz to 250 MHz, this crystal has a 3.2 mm x 1.5 mm footprint and a height under 1.0 mm. The resonator is manufactured using Statek’s photolithographic and chemical milling processes and then sealed within a ceramic package for high stability and low aging. Available with tight calibration tolerances and high stability over temperature, this crystal is well suited for many demanding applications. glass lid ceramic lid PACKAGE DIMENSIONS FEATURES Ultra-miniature package Ultra-low profile Hermetically sealed package Excellent aging characteristics Full military testing available Designed and manufactured in the USA TYPICAL inches mm 0.127 3.20 0.060 1.50 0.027 0.69 DIM A B C D APPLICATIONS Medical THICKNESS (DIM C) Lid Medical Telemetry Ceramic Medical Telemetry Cardiac Rhythm Management Cockpit Instrumentation Displays Data Communications Survival radio Industrial, Computer & Communications Thin Glass Avionic Indicators and Instruments Glass Cochlear Implants Infusion Pumps Military & Aerospace MAXIMUM inches mm 0.135 3.43 0.068 1.73 see below 0.037 0.94 Termination Typical inches mm Maximum inches mm SM1 0.030 0.77 0.035 0.90 SM2/SM4 0.031 0.79 0.036 0.92 SM3/SM5 0.033 0.84 0.038 0.97 SM1 0.029 0.74 0.034 0.87 SM2/SM4 0.030 0.77 0.035 0.89 SM3/SM5 0.032 0.81 0.037 0.94 SM1 0.025 0.64 0.030 0.77 SM2/SM4 0.026 0.66 0.031 0.79 SM3/SM5 0.028 0.71 0.033 0.84 SUGGESTED LAND PATTERN Communications Transmitters Pulse Generators Tracking Beacons Wildlife Telemetry 10179 Rev B STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com SPECIFICATIONS TERMINATIONS Specifications are typical at 25OC unless otherwise noted. Specifications are subject to change without notice. Designation SM1 SM2 SM3 SM4 SM5 Fundamental Frequency 16.0 MHz 24.0 MHz 155.52 MHz Motional Resistance R1(Ω) 90 30 25 Motional Capacitance C1 (fF) 1.5 1.6 2.8 Quality Factor Q (k) 70 150 16 Shunt Capacitance C0 (pF) 0.7 0.7 1.4 Calibration Tolerance1 ±100 to ±30 ppm, or tighter as required Load Capacitance 9 pF (unless specified otherwise) Drive Level 200 µW MAX Frequency-Temperature Stability1,2 ±50 ppm to ±10 ppm (Commercial) Termination Gold Plated (Lead Free) Solder Plated Solder Dipped Solder Plated (Lead Free) Solder Dipped (Lead Free) EQUIVALENT CIRCUIT ±50 ppm to ±20 ppm (Industrial) ±100 ppm to ±30 ppm (Military) Aging, first year 3 ppm MAX (better than 1 ppm available) Shock, survival 5,000 g, 0.3 ms, 1/2 sine Vibration, survival3 20 g, 10-2,000 Hz swept sine Operating Temp. Range -10OC to +70OC (Commercial) -40OC to +85OC (Industrial) -55OC to +125OC (Military) Storage Temp. Range -55OC to +125OC Max Process Temperature 260OC for 20 sec. PACKAGING OPTIONS • Tray Pack • 12 mm tape, 7”or 13” reels Per EIA 481 (see Tape and Reel data sheet 10109) 1. Other tolerances available. Contact factory. 2. Does not include calibration tolerance. The characteristics of the frequency stability over temperature follow that of the AT thickness-shear mode. 3. Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also available. HOW TO ORDER CX11 AT CRYSTALS CX11 S Blank = Standard S = Special or custom C SM1 Blank = Glass Lid T = Thin Glass Lid C = Ceramic Lid SM1 = Gold Plated (Lead Free) SM2 = Solder Plated SM3 = Solder Dipped SM4 = Solder Plated (Lead Free) SM5 = Solder Dipped (Lead Free) Note: Crystals with SM1, SM4 or SM5 terminations are Pb-free. Crystals with SM2 or SM3 terminations contain Pb. — 24.0M , Frequency M = MHz 50 / 50 / — / Calibration Frequency Tolerance Stability over @ 250C Temp.Range (in ppm) (in ppm) Temp. Range: C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified OR — / — / I 100 Total Frequency Tolerance (in ppm) / I Operating Temp. Range: C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified 10179 Rev B STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com