TENSILITY 50

Revision
Date
9/2/2009
Initial release
A1
11/9/2012
Added test data
5.4
1. 2
5.8 ±0.30
3.5
16.7 ±0.30
20 ±0.50
3
2
1
5 ±0.30
Notes
RoHS compliant
Function test: no open, no short circuit, no INT
DIMENSIONS ARE IN MILLIMETERS
TOLERANCES:
X:
0.5 mm
X.X:
0.3 mm
X.XX: 0.05 mm
5
0.7
2
1.5 ±0.10
Description
A
2.7
+0.10
1.7 - 0
1
4.7 ±0.10
3.2 ±0.20
+0.10
4.75 - 0
Materials
1. Center contact, C5191 phosphor bronze, 2 μm nickel
plated
2. Insulator, PBT + 15% glass fiber, black
3. Shell, C2700 brass, 2 μm nickel plated

Electrical requirements
Dielectric strength: 1 min @ 500 Vac
Insulation resistance: 100 MΩ @ 500 Vdc
Contact resistance: 30 mΩ or less
Rated voltage: 20 Vdc
Rated current: 6 A

Mechanical requirements
Insertion force: 0.5-3 kgf
Withdrawal force: 0.4-2 kgf
Durability: 5000 mating cycles while maintaining; 0.3-2 kgf
insertion force, 0.2-1.5 kgf withdrawal force and a less than
100 mΩ contact resistance.

Environmental requirements
Damp test: 40 °C, RH 90-100% for 96 hrs. Cool to ambient
and recover for 2 hours. Maintain dielectric strength of 500
Vac for 1 min, insulation resistance of 50 MΩ @ 500 Vdc
minimum and a contact resistance of 100 mΩ or less.

Dry test: 70 °C, RH 70-85% for 96 hrs. Cool to ambient and
recover for 2 hours. Maintain insulation resistance of 50
MΩ @ 500 Vdc minimum and a contact resistance of 100
mΩ or less.

Salt spray test: 35 °C, RH 90-95%, 5% NaCl mist for 24 hrs.
Wash parts after test. Maintain mechanical requirements
and a contact resistance of less than 80 mΩ.

Operating range
-25 to 70 °C, relative humidity of 85% or less
4
20802 Sockeye Place #130
Bend, OR 97701 USA
tel 541.323.3228 fax 541.323.4202
800 877.670.7118 www.tensility.com
DESCRIPTION:
Connector, dc plug, 4.75x1.7xL20 mm, EIAJ-3,
molding style, spring contacts
SIZE Part number
A
50-00028
SCALE: 2:1
3
2
SHEET 1 OF 1
WEIGHT:
1