Revision A Date 11/7/2012 1.7 ±0.20 0.5 ±0.20 5.8 ±0.30 3.5 16.7 ±0.30 21 ±0.50 2 1 3 1.6 5 ±0.30 Description Notes RoHS compliant Initial release Function test: no open, no short circuit, no INT DIMENSIONS ARE IN MILLIMETERS TOLERANCES: X: 0.5 mm X.X: 0.3 mm X.XX: 0.05 mm 5 0.7 2.4 2.7 +0.10 1.7 - 0 1.5 4.7 ±0.10 1.5 ±0.10 +0.10 4.75 - 0 Materials 1. Insulator, PBT + 15% glass fiber, white 2. Shell, C2700 brass, 2 μm nickel plated 3. Spring contact, C5191 phosphor bronze, 2 μm nickel plated Electrical requirements Dielectric strength: 1 min @ 500 Vac Insulation resistance: 100 MΩ @ 500 Vdc Contact resistance: 30 mΩ or less Rated voltage: 20 Vdc Rated current: 6 A Mechanical requirements Insertion force: 0.5-3 kgf Withdrawal force: 0.4-2 kgf Durability: 5000 mating cycles while maintaining; 0.3-2 kgf insertion force, 0.2-1.5 kgf withdrawal force and a less than 100 mΩ contact resistance. Environmental requirements Damp test: 40 °C, RH 90-100% for 96 hrs. Cool to ambient and recover for 2 hours. Maintain dielectric strength of 500 Vac for 1 min, insulation resistance of 50 MΩ @ 500 Vdc minimum and a contact resistance of 100 mΩ or less. Dry test: 70 °C, RH 70-85% for 96 hrs. Cool to ambient and recover for 2 hours. Maintain insulation resistance of 50 MΩ @ 500 Vdc minimum and a contact resistance of 100 mΩ or less. Salt spray test: 35 °C, RH 90-95%, 5% NaCl mist for 24 hrs. Wash parts after test. Maintain mechanical requirements and a contact resistance of less than 80 mΩ. Operating range -25 to 70 °C, relative humidity of 85% or less 4 20802 Sockeye Place #130 Bend, OR 97701 USA tel 541.323.3228 fax 541.323.4202 800 877.670.7118 www.tensility.com DESCRIPTION: Connector, dc plug, 4.75x1.7xL21mm, brass, nickel plated, molding type, white insulators SIZE Part number A 50-00316 SCALE: 2:1 3 2 SHEET 1 OF 1 WEIGHT: 1