1.8 ±0.20 0.5 ±0.10 2 ±0.30 2 6.5 5.3 ±0.20 +0.10 2.1 - 0 +0.05 5.5 - 0 Materials 1. Insulator, PBT + 15% glass fiber, black 2. Shell, C2700 brass, 2 μm nickel plated 3. Spring contact, C5191 phosphor bronze, 2 μm nickel plated Electrical requirements Dielectric strength: 1 min @ 500 Vac Insulation resistance: 100 MΩ @ 500 Vdc Contact resistance: 30 mΩ or less Rated voltage: 20 Vdc Rated current: 7 A Mechanical requirements Insertion force: 0.3-3 kgf Withdrawal force: 0.3-3 kgf Durability: 5000 mating cycles while maintaining; 0.3-2 kgf insertion force, 0.2-1.5 kgf withdrawal force and a less than 100 mΩ contact resistance. Environmental requirements Damp test: 40 °C, RH 90-100% for 96 hrs. Cool to ambient and recover for 2 hours. Maintain dielectric strength of 500 Vac for 1 min, insulation resistance of 50 MΩ @ 500 Vdc minimum and a contact resistance of 100 mΩ or less. Dry test: 70 °C, RH 70-85% for 96 hrs. Cool to ambient and recover for 2 hours. Maintain insulation resistance of 50 MΩ @ 500 Vdc minimum and a contact resistance of 100 mΩ or less. Salt spray test: 35 °C, RH 90-95%, 5% NaCl mist for 24 hrs. Wash parts after test. Maintain mechanical requirements and a contact resistance of less than 80 mΩ. Operating range -25 to 70 °C, relative humidity of 85% or less 1.5 ±0.10 0.8 15.8 ±0.30 20.5 ±0.50 1 2 2.4 1.5 10.5 ±0.50 Revision Date Description A 11/28/2011 Initial release A1 8/17/2012 updated dimensions and materials A2 11/9/2012 Added test data Notes RoHS compliant Function test: no open, no short circuit, no INT DIMENSIONS ARE IN MILLIMETERS TOLERANCES: X: 0.5 mm X.X: 0.3 mm X.XX: 0.05 mm 5 3 4 20802 Sockeye Place #130 Bend, OR 97701 USA tel 541.323.3228 fax 541.323.4202 800 877.670.7118 www.tensility.com DESCRIPTION: Connector, dc plug, 5.5x2.1xL20.5 mm, molding style, spring contacts, for right angle applications 3 2 SIZE Part number A 50-00186 SCALE: 2:1 SHEET 1 OF 1 WEIGHT: 1