Revision Date +0.20 5.5 - 0 9/2/2009 Initial release A1 11/9/2012 Added test data 1.5 2.15 +0 2.5 - 0.10 1 15 ±0.30 17.4 ±0.50 1 3 1.3 ±0.30 11.5 ±1 Notes RoHS compliant Function test: no open, no short circuit, no INT DIMENSIONS ARE IN MILLIMETERS TOLERANCES: X: 0.5 mm X.X: 0.3 mm X.XX: 0.05 mm 5 4 2 Description A 8 ±0.05 Materials 1. Shell, C3604 brass, 2 μm nickel plated 2. Insulator, ABS, black 3. Pin, C3604 brass, 2 μm nickel plated 4. Spring contact, C5191 phosphor bronze, 2 μm nickel plated Electrical requirements Dielectric strength: 1 min @ 500 Vac Insulation resistance: 100 MΩ @ 500 Vdc Contact resistance: 30 mΩ or less Rated voltage: 20 Vdc Rated current: 8 A Mechanical requirements Insertion force: 0.3-3 kgf Withdrawal force: 0.3-3 kgf Durability: 5000 mating cycles while maintaining; 0.3 kgf min. insertion force, 0.2 kgf min. withdrawal force and a less than 100 mΩ contact resistance. Environmental requirements Damp test: 40 °C, RH 90-100% for 96 hrs. Cool to ambient and recover for 2 hours. Maintain dielectric strength of 500 Vac for 1 min, insulation resistance of 50 MΩ @ 500 Vdc minimum and a contact resistance of 100 mΩ or less. Dry test: 70 °C, RH 70-85% for 96 hrs. Cool to ambient and recover for 2 hours. Maintain insulation resistance of 50 MΩ @ 500 Vdc minimum and a contact resistance of 100 mΩ or less. Salt spray test: 35 °C, RH 90-95%, 5% NaCl mist for 24 hrs. Wash parts after test. Maintain mechanical requirements and a contact resistance of less than 80 mΩ. Operating range -25 to 70 °C, relative humidity of 85% or less 4 20802 Sockeye Place #130 Bend, OR 97701 USA tel 541.323.3228 fax 541.323.4202 800 877.670.7118 www.tensility.com DESCRIPTION: Connector, dc jack, 5.5x2.5xL17.4 mm, molding style SIZE Part number A 50-00027 SCALE: 2:1 3 2 SHEET 1 OF 1 WEIGHT: 1