Product specification 2SA733 SOT-23 Features Unit: mm +0.1 2.9-0.1 +0.1 0.4-0.1 Collector-Base Voltage: VCBO=-60V 1 0.55 +0.1 1.3-0.1 +0.1 2.4-0.1 0.4 3 2 +0.1 0.95-0.1 +0.1 1.9-0.1 0-0.1 +0.1 0.38-0.1 +0.1 0.97-0.1 +0.05 0.1-0.01 1.Base 2.Emitter 3.collector Absolute Maximum Ratings Ta = 25 Parameter Symbol Rating Unit Collector to base voltage VCBO -60 V Collector to emitter voltage VCEO -50 V Emitter to base voltage VEBO -5.0 V Collector Current (DC) IC -150 mA Power dissipation PC 200 mW Junction temperature Tj 150 Storage temperature Tstg -55 to +150 Electrical Characteristics Ta = 25 Parameter Symbol Testconditons Min Collector-base breakdown voltage VCBO IC= -5uA,IE=0 -60 Typ Max Unit V Collector-emitter breakdown voltage VCEO IC= -1mA , IB=0 -50 V Emitter-base breakdown voltage VEBO IE= -50uA, IC=0 -5 V Collector cut-off current ICBO VCB= -60 V , IE=0 Emitter cut-off current IEBO VEB= -5 V , IC=0 DC current gain hFE VCE= -6 V, IC=-1mA Collector-emitter saturation voltage VCE(sat) IC= -100mA, IB=- 10mA Base-emitter voltage VBE(on) VCE=-6V,IC=-1.0mA Collector output capacitance Cob VCB=-10V,IE=0,f=1MHZ Noise figure NF VCE=-6V,IC=-0.3mA,Rg=10k? ,f=100HZ Transition frequency fT VCE=-6V,IC=-10mA 120 -0.1 uA -0.1 uA 475 -0.18 -0.3 V -0.58 -0.62 -0.68 V 4.5 7 pF 6 20 dB 50 MHz Marking Marking M6 CSL CSH Range 200-400 120-220 220-475 http://www.twtysemi.com [email protected] 4008-318-123 1 of 2 Product specification 2SA733 Typical Characteristics http://www.twtysemi.com [email protected] 4008-318-123 2 of 2