Not for New Design 151 RLH www.vishay.com Vishay BCcomponents Aluminum Capacitors Radial Long-Life, High Voltage FEATURES • • • • • 044 RSH 85 ° C 151 RLH 105 °C miniaturized 152 RMH low voltage 148 RUS miniaturized APPLICATIONS • High-reliability and professional applications • Lighting, monitors, consumer electronics, industrial • Filtering of high voltages in power supplies 048 RML Fig. 1 QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) Rated capacitance range, CR Tolerance on CR Rated voltage range, UR Category temperature range Endurance test at 105 °C Useful life at 105 °C: Case Ø D = 10 mm and 12.5 mm Case Ø D = 16 mm and 18 mm Useful life at 40 °C, 1.6 x IR applied: Case Ø D = 10 mm and 12.5 mm Case Ø D = 16 mm and 18 mm Shelf life at 0 V, 105 °C Based on sectional specification Climatic category IEC 60068 Long useful life: 3000 h to 4000 h at 105 °C High reliability High rated voltage, up to 450 V Charge and discharge proof Polarized aluminum electrolytic capacitors, non-solid electrolyte • Radial leads, cylindrical aluminum case, insulated with a blue sleeve • Pressure relief • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 VALUE 10 x 12 to 18 x 35 2.2 μF to 220 μF ± 20 % 160 V to 450 V - 40 °C to + 105 °C 2000 h 3000 h 4000 h 200 000 h 260 000 h 500 h IEC 60384-4/EN130300 40/105/56 general MARKING The capacitors are marked (where possible) with the following information: • Rated capacitance value (in μF) • Tolerance on rated capacitance, code letter in accordance with IEC 60062 (M for ± 20 %) • Rated voltage (in V) • Date code, in accordance with IEC 60062 • Code indicating factory of origin • Name of manufacturer • Upper category temperature (105 °C) • Negative terminal identification • Series number (151) SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) CR (μF) 2.2 3.3 4.7 10 22 33 47 100 220 Revision: 31-Jul-12 UR (V) 160 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 25 18 x 20 18 x 35 200 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 31 18 x 25 - 250 10 x 12 10 x 20 12.5 x 25 16 x 20 12.5 x 25 16 x 20 16 x 25 18 x 20 16 x 31 18 x 25 - 350 10 x 12 10 x 16 12.5 x 20 12.5 x 25 16 x 20 16 x 25 16 x 35 18 x 31 - 400 10 x 12 10 x 16 10 x 20 12.5 x 20 16 x 25 18 x 20 16 x 31 18 x 25 18 x 31 - 450 10 x 16 10 x 20 12.5 x 20 16 x 20 16 x 31 18 x 25 18 x 35 - Document Number: 28319 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Design 151 RLH www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters AND AVAILABLE FORMS ØD ØD F ØD 15 min. 4 +- 01 ØD 5 min. F Fig. 2 - Form CA: Long leads Fig. 3 - Form CB: Cut leads Fig. 4 - Form TFA: Taped in box (ammopack) Table 1 DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIZE ØDxL CASE CODE Ød Ø Dmax. Lmax. F MASS (g) PACKAGING QUANTITIES PER BOX FORM CA FORM CB FORM TFA 10 x 12 14 0.6 10.5 13.5 5.0 ± 0.5 1.6 1000 500 800 10 x 16 15 0.6 10.5 17.5 5.0 ± 0.5 1.9 500 500 800 10 x 20 16 0.6 10.5 22.0 5.0 ± 0.5 2.2 500 500 800 12.5 x 20 17 0.6 13.0 22.0 5.0 ± 0.5 4.0 500 500 500 12.5 x 25 18 0.6 13.0 27.0 5.0 ± 0.5 5.0 250 250 500 16 x 20 19 a 0.8 16.5 22.0 7.5 ± 0.5 6.0 250 250 250 16 x 25 19 0.8 16.5 27.0 7.5 ± 0.5 8.0 250 250 250 16 x 31 20 0.8 16.5 33.5 7.5 ± 0.5 9.0 100 100 250 16 x 35 21 0.8 16.5 37.5 7.5 ± 0.5 11.0 100 100 - 18 x 20 1820 0.8 18.5 22.0 7.5 ± 0.5 8.0 100 100 - 18 x 25 1825 0.8 18.5 27.0 7.5 ± 0.5 10.0 100 100 18 x 31 1831 0.8 18.5 33.5 7.5 ± 0.5 12.5 100 100 - 18 x 35 22 0.8 18.5 37.5 7.5 ± 0.5 14.5 100 100 - Revision: 31-Jul-12 Document Number: 28319 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Design 151 RLH www.vishay.com Vishay BCcomponents ORDERING EXAMPLE ELECTRICAL DATA SYMBOL Electrolytic capacitor 151 series DESCRIPTION CR Rated capacitance at 100 Hz, tolerance ± 20 % 4.7 μF/400 V; ± 20 % IR Rated RMS ripple current at 100 Hz, 105 °C Nominal case size: Ø 10 mm x 20 mm; Form TFA Max. leakage current after 1 min at UR Ordering code: MAL215136478E3 Former 12NC: 2222 151 36478 IL1 tan Max. dissipation factor at 100 Hz Z Max. impedance at 10 kHz Note • Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %. Table 2 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 160 200 250 350 CR 100 Hz (μF) NOMINAL CASE SIZE ØDxL (mm) IR 100 Hz 105 °C (mA) IL1 1 min (μA) tan 100 Hz Z 10 kHz () ORDERING CODE MAL2151....... BULK PACKAGING FORM CA FORM CB TAPED FORM TFA 10 10 x 16 95 118 0.12 6.3 51109E3 61109E3 31109E3 22 10 x 20 145 176 0.12 3.2 51229E3 61229E3 31229E3 33 12.5 x 20 190 228 0.12 2.3 51339E3 61339E3 31339E3 47 12.5 x 25 280 296 0.12 1.7 51479E3 61479E3 31479E3 47 16 x 20 280 296 0.12 1.7 91475E3 91476E3 91473E3 100 16 x 25 380 550 0.12 1.1 51101E3 61101E3 31101E3 100 18 x 20 380 550 0.12 1.1 91105E3 91106E3 - 220 18 x 35 630 1126 0.12 0.8 51221E3 61221E3 - 4.7 10 x 12 60 96 0.12 13.0 52478E3 62478E3 32478E3 10 10 x 16 95 130 0.12 6.3 52109E3 62109E3 32109E3 22 10 x 20 145 202 0.12 3.2 52229E3 62229E3 32229E3 33 12.5 x 20 190 268 0.12 2.3 52339E3 62339E3 32339E3 47 12.5 x 25 280 352 0.12 1.7 52479E3 62479E3 32479E3 47 16 x 20 280 352 0.12 1.7 92475E3 92476E3 92473E3 100 16 x 31 410 670 0.12 1.1 52101E3 62101E3 32101E3 100 18 x 25 410 670 0.12 1.1 92105E3 92106E3 - 4.7 10 x 12 60 105 0.12 13.0 53478E3 63478E3 33478E3 10 10 x 20 105 145 0.12 6.3 53109E3 63109E3 33109E3 22 12.5 x 25 180 235 0.12 3.2 53229E3 63229E3 33229E3 22 16 x 20 180 235 0.12 3.2 93225E3 93226E3 93223E3 33 12.5 x 25 250 318 0.12 2.3 53339E3 63339E3 33339E3 33 16 x 20 250 318 0.12 2.3 93335E3 93336E3 93333E3 47 16 x 25 300 423 0.12 1.7 53479E3 63479E3 33479E3 47 18 x 20 300 423 0.12 1.7 93475E3 93476E3 - 100 16 x 31 410 820 0.12 1.1 53101E3 63101E3 33101E3 100 18 x 25 410 820 0.12 1.1 93105E3 93106E3 - 3.3 10 x 12 50 105 0.15 22.0 55338E3 65338E3 35338E3 4.7 10 x 16 65 119 0.15 16.0 55478E3 65478E3 35478E3 10 12.5 x 20 120 175 0.15 7.6 55109E3 65109E3 35109E3 22 12 .5 x 25 180 301 0.15 3.8 55229E3 65229E3 35229E3 22 16 x 20 180 301 0.15 3.8 95225E3 95226E3 95223E3 33 16 x 25 210 417 0.15 2.6 55339E3 65339E3 35339E3 47 16 x 35 300 564 0.15 2.0 55479E3 65479E3 - 47 18 x 31 300 564 0.15 2.0 95475E3 95476E3 - Revision: 31-Jul-12 Document Number: 28319 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Design 151 RLH www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION UR (V) IR 100 Hz 105 °C (mA) IL1 1 min (μA) 10 x 12 40 93 0.15 33.0 3.3 10 x 16 50 110 0.15 22.0 56338E3 66338E3 36338E3 4.7 10 x 20 70 126 0.15 16.0 56478E3 66478E3 36478E3 10 12.5 x 20 120 190 0.15 7.6 56109E3 66109E3 36109E3 22 16 x 25 200 334 0.15 3.8 56229E3 66229E3 36229E3 22 18 x 20 200 334 0.15 3.8 96225E3 96226E3 - 33 16 x 31 245 466 0.15 2.6 56339E3 66339E3 36339E3 2.2 400 450 ORDERING CODE MAL2151....... NOMINAL CASE SIZE ØDxL (mm) CR 100 Hz (μF) tan 100 Hz Z 10 kHz () BULK PACKAGING TAPED FORM CA FORM CB FORM TFA 56228E3 66228E3 36228E3 33 18 x 25 245 466 0.15 2.6 96335E3 96336E3 - 47 18 x 31 300 634 0.15 2.0 56479E3 66479E3 - 2.2 10 x 16 45 99 0.2 43.0 57228E3 67228E3 37228E3 3.3 10 x 20 65 115 0.2 29.0 57338E3 67338E3 37338E3 4.7 12.5 x 20 80 133 0.2 20.0 57478E3 67478E3 37478E3 10 16 x 20 140 205 0.2 10.0 57109E3 67109E3 37109E3 22 16 x 31 220 367 0.2 4.6 57229E3 67229E3 37229E3 22 18 x 25 220 367 0.2 4.6 97225E3 97226E3 - 33 18 x 35 280 516 0.2 3.4 57339E3 67339E3 - ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage IEC 60384-4, subclause 4.14: Surge voltage Reverse voltage UR = 160 V to 250 V Us 1.15 x UR UR = 350 V to 400 V Us 1.10 x UR IEC 60384-4, subclause 4.15 Urev 1 V Current After 1 min at UR: Leakage current CV 1000 μC IL1 0.06 CR x UR + 40 μA CV > 1000 μC IL1 0.03 CR x UR + 70 μA After 5 min at UR: CV 1000 μC IL5 0.03 CR x UR + 15 μA CV > 1000 μC IL5 0.015 CR x UR + 30 μA Inductance Equivalent series inductance (ESL) Case Ø D = 10 mm Typ. 16 nH Case Ø D 12.5 mm Typ. 18 nH Calculated from tan max. and CR (see Table 2) ESR = tan /2f CR Resistance Equivalent series resistance (ESR) Revision: 31-Jul-12 Document Number: 28319 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Design 151 RLH www.vishay.com Vishay BCcomponents RIPPLE CURRENT AND USEFUL LIFE CCC206 3.8 3.7 IA IR 3.6 3.5 3.4 3.3 3.2 3.1 3.0 2.8 Lifetime multiplier 2.6 0 1. 2.4 5 1. 0 2. 2.2 0 3. 0 4. 2.0 0 6. 0 8. 1.8 20 30 Useful life at 105 °C and IR applied Case Ø D = 10 mm and 12.5 mm: 3000 h Case Ø D = 16 mm and 18 mm: 4000 h (1) 0 10 0 15 0 20 (1) 1.4 1.2 1.0 0.8 0.5 0.0 60 IA = Actual ripple current at 100 Hz IR = Rated ripple current at 100 Hz, 105 °C 12 1.6 40 50 60 70 80 90 100 110 Tamb (°C) Fig. 5 - Multiplier of useful life as a function of ambient temperature and ripple current load Table 3 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY Revision: 31-Jul-12 FREQUENCY (Hz) IR MULTIPLIER 50 0.75 100 1.00 300 1.20 1000 1.35 3000 1.45 10 000 1.50 Document Number: 28319 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Design 151 RLH www.vishay.com Vishay BCcomponents Table 4 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Endurance REFERENCE IEC 60384-4/ EN130300 subclause 4.15 PROCEDURE (quick reference) REQUIREMENTS Tamb = 105 °C; UR applied; 2000 h C/C: ± 20 % tan 2 x spec. limit Z 2 x spec. limit IL5 spec. limit Useful life CECC 30301 subclause 1.8.1 Tamb = 105 °C; UR and IR applied; Case Ø D = 10 mm and 12.5 mm: 3000 h; Case Ø D = 16 mm and 18 mm: 4000 h C/C: ± 50 % tan 3 x spec. limit Z 3 x spec. limit IL5 spec. limit No short or open circuit Total failure percentage: 1% Shelf life (storage at high temperature) IEC 60384-4/ EN130300 subclause 4.17 Tamb = 105 °C; no voltage applied; 500 h After test: UR to be applied for 30 min, 24 h to 48 h before measurement C/C: ± 20 % tan 2 x spec. limit Z 2 x spec. limit IL5 2 x spec. limit Revision: 31-Jul-12 Document Number: 28319 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000