Product specification DF005S - DF10S DF-S ■ Features 0.205 (5.2) 0.195 (5.0) 0.047 (1.20) 0.040 (1.02) ● Glass passivated chip junctions ● Low Forward Voltage Drop, High Current Capability ● Surge Overload Rating to 50A Peak 0.404 (10.3) 0.386 (9.80) 0.335 (8.51) 0.320 (8.13) 45o 0.255 (6.5) 0.245 (6.2) 0.013 (0.330) 0.130 (3.3) 0.009 (0.241) 0.120 (3.05) 0.060 (1.524) 0.040 (1.016) 0.013 (0.330) 0.003 (0.076) Dimensions in inches and (millimeters) ■ Absolute Maximum Ratings Ta = 25℃ Parameter Symbol DF005S DF01S DF02S DF04S DF06S DF08S DF10S Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRMM VRWM VDC 50 100 200 400 600 800 1000 V RMS Reverse Voltage VRMS 35 70 140 280 420 560 700 V Average Forward Rectified Current TA=@ 40℃ Non-Repetitive Peak Forward Surge Current, 8.3 ms Single half-sine-wave Superimposed on Rated Load (JEDECmethod) Forward Voltage (per element) @ IF = 1.0A Reverse Current(per element) @ Rated VR , TA = 25℃ TA = 125℃ Rating for fusing (t < 8.3ms) 1.0 A IFSM 50 A VF 1.1 V IR 10 500 μA 2 It 10 A2s CJ 25 pF RθJA 40 ℃/W Tj, Tstg -55 to +150 ℃ Typical Total Capacitance (per element) (Note 1) Typical Thermal Resistance, Junction to Ambient (Note 2) Operating and Storage Temperature Range IO Notes: 1. Measured at 1.0 MHz and Applied Reverse Voltage of 4.0V DC. 2.Device mounted on PCB with 0.5 × 0.5” (13 × 13mm). http://www.twtysemi.com [email protected] 4008-318-123 1 of 2 Product specification DF005S - DF10S I(AV), AVERAGE FORWARD CURRENT (A) 1.0 IF, INSTANTANEOUS FORWARD CURRENT (A) Typical Characteristics 60 Hz Resistive or Inductive load 0.5 0 40 60 100 80 120 10 1.0 0.1 0.01 140 0.4 0.8 1.0 1.2 1.4 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typ Forward Characteristics (per element) TA, AMBIENT TEMPERATURE (°C) Fig. 1 Output Current Derating Curve 60 100 Tj = 25°C f = 1.0 Mhz Vsig = 50 mV p-p Single half-sine-Wave 50 CT, TOTAL CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 0.6 40 30 20 10 10 0 1 10 1 100 1 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance (per element) NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Peak Forward Surge Current 100 Tj = 125°C 10 1.0 Tj = 25°C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fi . 5 T p Reverse Characteristics (per element) http://www.twtysemi.com [email protected] 4008-318-123 2 of 2