DATA SHEET DB151 THRU DB157 SEMICONDUCTOR SINGLE-PHASE GLASS PASSIVATED VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.5 Ampere Unit:inch(mm) DIP FEATURES .255(6.5) .245(6.2) Good for automation insertion Surge overload rating - 50 amperes peak Ideal for printed circuit board Reliable low cost construction utilizing molded Glass passivated device .335(8.51) .320(8.12) .135(3.4) .115(2.9) Polarity symbols molded on body Mounting position: Any .060 (15) Weight: 1.0 gram High temperature soldering : 260OC / 10 seconds at terminals .045(1.14) .035(0.89) Pb free product at available : 99% Sn above meet RoHS environment substance directive request .205(5.2) .195(5.0) .020 0.5 .165(4.2) .155(3.9) .350(8.9) .300(7.6) .013(0.33) .0088(0.22) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. MAXIMUM RATINGS (At TA = 25oC unless otherwise noted) RATINGS SYMBOL DB151 DB152 DB153 DB154 DB155 DB156 DB157 UNITS Volts Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts Maximum DC Blocking Voltage Maximum Average Forward Output Current at TA = 40oC IO 1.5 Amps IFSM 60 Amps TJ,TSTG -55 to + 150 Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Operating and Storage Temperature Range ℃ ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) SYMBOL CHARACTERISTICS Maximum Forward Voltage Drop per Bridge DB151 VF Maximum Forward Voltage Drop per @TA = 25oC @TA = 125oC DB153 DB154 1.1 Element at 1.0A DC Bridge DB152 5 IR 0.5 DB155 DB156 DB157 UNITS Volts uAmps mAmps DC Blocking Voltage per element http://www.yeashin.com 1 REV.02 20120305 DEVICE CHARACTERISTICS INSTANTANEOUS FWD CUTTENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES DB151 THRU DB157 3.0 2.5 2.0 1.5 1.0 0.5 0 0 50 100 150 T J =25 OC Pulse Width = 200uS O AMBIENT TEMPERATURE, C INSTANTANEOUS FWD VOLTAGE, VOLTS FIG.2 TYPICAL FORWARD CHARACTERISTICS 10 FORWARD SURGE CURRENT, AMPERES (HALF SINE-WAVE) INSTANTANEOUS REVERSE CURRENT,uA FIG.1 DERATING CURVE FOR OUTPUT RECTIFIED CURRENT O TA = 100 C 1.0 0.1 TA= 25 O C 0.01 0 20 40 60 80 100 120 140 40 30 20 10 0 1 2 6 10 20 40 60 100 NO. OF CYCLES AT 60Hz PERCENT OF PEAK REVERSE VOLTAGE, % FIG.4 MAX NON-REPETITIVE SURGE CURRENT FIG.3 TYPICAL REVERSE CHARACTERISTICS http://www.yeashin.com 50 2 REV.02 20120305