XPress SC Connector FEATURES AND SPECIFICATIONS Features and Benefits ■ Prepare the cable according to the Template. ■ Apply one drop of accelerant to ferrule face of the connector. ■ Apply the One part Adhesive on the fibre According to the Template. (No measuring or mixing is required) ■ Insert the Fibre completely into the connector. ■ For jacketed cable, Crimp tubing over the back of the connector. ■ After 2 minutes, Cleave the fibre. ■ Polish the connector end according to the Termination procedure ■ Low Insertion loss 0.34 dB Typ. ■ Operation Temperature -20°C to 70°C ■ Comply with EIA/TIA 568A ■ 900µm & 3mm Boot ■ No specific tooling required ■ Termination time : 2min Order No. AFR-00011 AFR-00006 91.A1080 91.A0900 91.A1290 Ordering Information This product is supplied in a kit with the following : ■ ■ ■ ■ ■ ■ SC Connector Dimensions 12 SC connectors, Polymeric Body. 3mm & 900µm boots. One tube of adhesive. One tube of Accelerant. Stripping template. Termination procedure printed on the kit Shipping Weight : 80g Description Xpress Termination Kit 12 SC Connectors SC Termination toolkit SC Polishing Disk Universal Cleaving Tool Xpress consumable kit for 5 Kits or 60 Connectors MOLEX PREMISE NETWORKS Molex Premise Networks Corporate Headquarters Tel: 603 324 0200 www.molexpn.com Western Europe Headquarters Tel: 44 (0) 1489 572111 www.molexpn.co.uk Eastern Europe Headquarters Tel: 48 22 36 92 51 www.molexpn.com.pl ©1999, Molex Premise Networks Asia Headquarters Tel: 852 2637 3759 www.molexpn.com.hk Printed in the UK Form# AFR-00011 South Pacific Headquarters Tel: 61 3 9747 8322 www.molexpn.com.au Molex Incorporated Tel: 630 969 4550 www.molex.com