Fibre Optic Cable Assemblies FEATURES AND SPECIFICATIONS Features and Benefits Molex Premise Networks offers a comprehensive range of Fibre Optic Cable assemblies for both Multimode and Singlemode applications. Low Smoke Zero Halogen Cable (LSZH) is used for all standard fibre cable assemblies. Special part numbers can be created using the table below. ■ ■ ■ ■ ■ ■ ■ Standard or custom assemblies Precision ferrule endface geometry Multimode and singlemode Controlled fibre protrusion Factory polished, tested and serialized. Insertion Loss <0.35dB per connector Colour coding (black/red) on Duplex ST® cable assemblies 9 1• x x• x x 2 • x x x x x Family Jacket Colour E = Dark Grey (50/125µm) K = Yellow (9/125µm) N = Orange (62.5/125µm) Connector Type, each end : 0 = No connector (pigtails) 1 = ST® 2 = FDDI 3 = SC 4 = ESCON® 5 = ST II® 6 = ST® with right angle boot 7 = SMA 8 = SC with right angle boot 9 = SC Duplex F = FC/PC M = ModLink P = OPTOCLIPII L = LC A = MTRJ - Male B = MTRJ - Female Lowest Number First Polishing Code : 0 = Standard 1 = SM, RL > 45dB 2 = SM, RL > 55dB 3 = SM, RL > 70dB (angle polish) Length - Metres For example : To order a 1 metre Duplex LSZH 62.5 ST® to SC Patch Cord, the part number would be 91.19.622.0010N Fibre Type : 5 = 50/125µm 6 = 62.5 / 125µm 8 = 9/125µm (SM) Cable Type : 1 = Simplex 2 = Duplex 3 = 900µm Jacket Type : 2 = LSZH MOLEX PREMISE NETWORKS Molex Premise Networks Corporate Headquarters Tel: 603 324 0200 www.molexpn.com Western Europe Headquarters Tel: 44 (0) 1489 572111 www.molexpn.co.uk Eastern Europe Headquarters Tel: 48 22 36 92 51 www.molexpn.com.pl ©1999, Molex Premise Networks Asia Headquarters Tel: 852 2637 3759 www.molexpn.com.hk Printed in the UK Form# 91.xx.xx2.xxxxx South Pacific Headquarters Tel: 61 3 9747 8322 www.molexpn.com.au Molex Incorporated Tel: 630 969 4550 www.molex.com