Polysnap® Power Inlet Modules IEC Fused Inlet - Polyflange r Screw Fixing to Panel r Vertical Module Arrangement r Snap-in Components r Inlet Variations (with various tag sizes) r Single Pole Switch Variations BVA01/Z0000/02 r Filtered Inlet Option r Options of O/I marked switches r Fused r Screw Fixing to Panel Polysnap® r Vertical Module Arrangement r Snap-in Components r Inlet Variations (with various tag sizes) r Single Pole Switch Variations BVB01/Z0000/01 r Filtered Inlet Option r Options of O/I marked switches r Fused How to Order BVx xx / xxxxx / xx Flange Type Type of Inlet / Outlet Filtered or Non Filtered Inlet Combination of Other Components A = Top fixing Fused Power Inlet (cold condition), 6.3 or 2.8mm tabs: Z0000 = Non Filtered Single Pole Switch: Axxxx = Standard 01 = S.P. Switch Bxxxx = Medical Single Pole Neon Switch: Cxxxx = High Performance Standard (Single Fuse Version only) 02 = S.P. Red Neon Switch 08 = S.P. Green Neon Switch B = Side fixing 01 = PF0011/63 02 = PF0011/28 Twin Fused Power Inlet (cold condition), 6.3 or 2.8mm tabs: Neon Indicator: 15 = PF0033/63 16 = PF0033/28 03 = Red Neon Indicator Single Pole High Inrush Switch: 46 = S.P. High Inrush Switch For Filtered inlet use 6th to 9th Single Pole Switch Marked O/I: characters from filter ordering code see pages 71-74. 69 = S.P. Switch (O/I) Single Pole Neon Switch Marked (O/I): E.g. BVA01/A0620/01 71 = S.P. Red Neon Switch (O/I) 74 = S.P. Green Neon Switch (O/I) Single Pole High Inrush Switch Marked (O/I): 98 = S.P. High Inrush Switch (O/I) Note: For technical details of individual components please see page 54 www.Bulgin.co.uk Tel: +44 (0) 20 8594 5588 69