Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:54 Page 128 POLYSNAP® POWER INLET MODULES C14 Inlet Twin Fuse - Standard Filter EMI FILTER OPTIONS ᔢ For Polysnap modules BZV15, BZV16, BZH13, BZH14, BZH15, BZH16, BZH21, BZH22, BVA15, BVA16, BVB15, BVB16 ᔢ PF0033 style twin fuse IEC inlet ᔢ Using PS26/A filter ᔢ Standard Attenuation Filter Bxxxx/A xx x x / xx Polysnap Part No. Filter Type Rating L/C Circuit Additional Components Polysnap Part No. From Polysnap Selection A = Standard 02 = 2A 2 = Version 2 0 = None From Polysnap Selection IEC CONNECTORS 04 = 4A 1 = Bleed (R) Resistor Rating Version L1 Cx Cy 2 AMP “ “ 1 2 3 2 x 1.8mH 1 x 15nF 2 x 2.2nF 4 AMP “ “ 1 2 3 Part No. Example BZH13/A0420/00 = BZH style Polysnap module with PF0033 twin fused (5 x 20mm) IEC power inlet, filter rated at 2 x 0.7mH 1 x 15nF 2 x 2.2nF 4 amps, L/C circuit version 2 (L1 = 2 x 0.7mH, Cx = 1 x 15nF, Cy = 2 x 2.2nF), without bleed resistor fitted, 6.3mm tabs and no additional components. Filter Specification Max. Working Voltage: 250V a.c. 50-400Hz Earth Leakage Current: <0.35mA (250V. 50Hz) Temperature Range: –25ºC to +85ºC Max. Ambient Temp.: (@ Full Load) 40ºC (derate linearly to 0A @ 85ºC) Test Voltage: 2700V d.c. 2 secs. Lines to Earth 1100V d.c. 2 secs. Live to Neutral Approvals: Attenuation Curves: 128 See PS26/A filter, page 142 www.elektron-bulgin.com