NPN Black Plastic Two Bits Phototransistor LTR-5576D/LTR-5986D Features Package Dimensions Wide range of collector currents. High sensitivity. Fast switching time. LTR-5576D Description INFRARED PRODUCTS The LTR-5576D and LTR-5986D are special dark plastic package that cut the visible for the detector and coupled with LTE-309 and LTE-302 for mouse & photoencoder application. LTR-5986D Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25mm (.010") unless otherwise noted. 3. Protruded resin under flange is 1.5mm (.059") max. 4. Lead spacing is measured where the leads emerge from the package. 5. Specifications are subject to change without notice. Absolute Maximum Ratings at Ta=25 Parameter Maximum Rating Unit Power Dissipation 100 mW Collector-Emitter Voltage 30 V Emitter-Collector Voltage 5 V Operating Temperature Range -40 to +85 Storage Temperature Range -55 to +100 Lead Soldering Temperature [1.6mm (.063 in.) from body] 260 for 5 Seconds 10-39 Electrical Optical Characteristics at Ta=25 Parameter Symbol Min. Typ. Collector-Emitter Breakdown Voltage V(BR)CEO 30 V Emitter-Collector Breakdown Voltage V(BR)ECO 5 V Collector Emitter Saturation Voltage VCE(SAT) 0.1 Rise Time Tr 15 S Fall Time Tf 18 S Collector Dark Current I CEO On State Collector Current IC(ON) 0.16 0.4 R 0.8 1.0 Collector Current Ratio of 2 Phototransistor 0.4 100 Typical Electrical/Optical Characteristic Curves (25 Ambient Temperature Unless Otherwise Noted) 10-40 Max. Unit V nA mA 1.25 Test Condition IC=1mA Ee=0mW/cm2 IE=100 A Ee=0mW/cm2 IC=100 A Ee=1mW/cm2 VCC=5V IC=1mA RL=1K VCE=10V Ee=0mW/cm2 VCE=5V Ee=1mW/cm2 =940nm IC(on)(a)/IC(on)(b)