IDC Systems Male Connectors PRODUCT DESCRIPTION Male Connectors are designed to mate with Female Socket Transition Connectors. Used primarily for in-line cable splice and “T” tap applications, they are available with optional mounting ears for l/O applications. Retainer/ejector latches provide a convenient means of disconnect. MALE CONNECTORS DESIGN ADVANTAGES • 13 connector sizes-10,14,16, 20, 24, 26, 34, 40, 44, 50, 56, 60 and 64-position. • Available with or without mounting ears. • Contact Material—Beryllium copper with 30 micro inches min. gold over 50 micro inches min. nickel plating. • 30µ” (minimum) gold plating in contact mating areas. • Box shape assures polarization and protects mating pins. • Connector designed for center bump and dual slot polarizing methods. MALE CONNECTORS INDEX Male connectors 10 to 64 pos. w/o mounting ears ................46 Male connectors 10 to 64 pos. w/half mounting ears ............47 • Solid .025” square posts for strength and durability. • Strain relief available for both connector versions. • Optional polarizing key. LR92984 Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 45 E60980 IDC Systems Male Connectors MALE CONNECTOR 10 TO 64 POSITIONS WITHOUT MOUNTING EARS LR92984 E60980 PHYSICAL PROPERTIES INSULATION MATERIAL: Glass filled thermoplastic rated UL 94V-0 COLOR: Blue CONTACT MATERIAL: Beryllium copper, 30µ inches min. gold over 50µ inches min. nickel in contact zone; tin/lead over nickel in termination area. B 2.54 (.100) 8.5 (.335) ELECTRICAL PROPERTIES CURRENT RATING: 1 Amp INSULATION RESISTANCE: >1 x 109 Ohms @ 500 VDC DIELECTRIC STRENGTH: >1000 VRMS @ sea level 2.54 Nom. (.100) ENVIRONMENTAL PROPERTIES TEMPERATURE RATING: -55˚C TO 125°C 6.35 Nom. (.250) APPLICATION TOOLING HAND TOOL use Die BENCH PRESS (MANUAL) use Platen use Base Plate BENCH PRESS (PNEUMATIC) use Platen use Base Plate 779-2100 779-2168A 779-3200 779-3130 779-3168A 779-3500XT 779-3130 779-3168A CABLE 14.86 Max. (.585) After Crimping 0.63 (.025) 6.02 Nom. (.237) A ±.23 (±.009) Ejector Latch Ordering Information See pages 108-120 SUFFIX MATING CONNECTORS See pages 9-12 ACCESSORIES POLARIZING KEY: See page 44 DIMENSIONS IN MM (INCHES) C D FINISH FOR USE WITH E 10.54 (.415) 22.22 (.875) Black Oxide Female Socket Connector without strain relief ES 14.63 (.576) 26.31 (1.036) Black Oxide Female Socket Connector with strain relief Ordering Information CATALOG NUMBER NO. OF POS. DIMENSIONS IN MM (INCHES) A B Optional Ejector Latch POLARIZATION 622-1006A 10 23.10 (.906) 10.16 (.400) MIL-TYPE ONLY 622-1006 10 23.10 (.906) 10.16 (.400) CENTER SLOT ONLY 622-1406 14 28.09 (1.106) 15.24 (.600) 622-1606 16 30.63 (1.206) 17.78 (.700) 622-2006 20 35 71 (1.406) 22.86 (.900) 622-2406 24 40.79 (1.606) 27.94 (1.100) 622-2606 26 43.33 (1.706) 30.48 (1.200) 622-3406 34 48.41 (1.906) 40.64 (1.600) MIL-TYPE AND 622-4006 40 56.03 (2.206) 48.26 (1.900) CENTER SLOT 622-4406 44 66.19 (2.606) 53.34 (2.100) 622-5006 50 73.81 (2.906) 60.96 (2.400) 622-5606 56 81.43 (3.206) 68.58 (2.700) 622-6006 60 86.51 (3.406) 73.66 (2.900) D Strain Relief 18.54 Max (.730) C 622-XX 66 Strain Relief Ordering Info (Optional) Number of Positions 622-6406 64 91.59 (3.606) 78.74 (3.100) For long ejectors, add suffix ES (-XXXXES). For short ejectors, add suffix E (-XXXXE) Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches). 46 IDC Systems Male Connectors MALE CONNECTOR 10 TO 64 POSITIONS WITH HALF MOUNTING EARS LR92984 E60980 PHYSICAL PROPERTIES 5.33 (.210) INSULATION MATERIAL: Glass filled thermoplastic rated UL 94V-0 COLOR: Blue CONTACT MATERIAL: Beryllium copper, 30µ inches min. gold over 50µ inches min. nickel in contact zone; tin/lead over nickel in termination area. 17.02 (.674) Before cable installation 14.86 MAX (.585) After Crimping ELECTRICAL PROPERTIES CURRENT RATING: 1 Amp INSULATION RESISTANCE: >1 x 109 Ohms @ 500 VDC DIELECTRIC STRENGTH: >1000 VRMS @ sea level .63 (.025) 6.35 Nom. (.250) 6.02 Nom. (.237) ENVIRONMENTAL PROPERTIES C A B TEMPERATURE RATING: -55˚C TO 125°C B ±.13 (± .005) 4.65 ± .13 (.183 ±.005) 8.5 (.335) 2XØ 3.25 ± .05 (.128 ±.002) 9.30 ± .13 (.366 ± .005) 2.54 Nom. (.100) 3.30 (.130) ±.13 E (± .005) D 2.54 Nom. (.100) Recommended Panel Cutout Dimensions Ejector Latch Strain Relief Central within .004 to holes Ejector Latch Ordering Information SUFFIX G DIMENSIONS IN MM (INCHES) F G FINISH FOR USE WITH E 10.54 (.415) 22.22 (.875) Black Oxide Female Socket Connector without strain relief ES 14.63 (.576) 26.31 (1.036) Black Oxide Female Socket Connector with strain relief F 622-XX 66 Strain Relief Ordering Info (Optional) Ordering Information CATALOG NUMBER 18.54 Max (.730) Number of Positions NO. OF POS. DIMENSIONS IN MM (INCHES) C D A B E POLARIZATION 622-1016A 10 38.48 (1.500) 38.48 (1.200) 23.10 (.906) 10.16 (.400) 23.88 (.940) MIL-TYPE ONLY 622-1016 10 38.48 (1.500) 38.48 (1.200) 23.10 (.906) 10.16 (.400) 23.88 (.940) CENTER SLOT ONLY 622-1416 14 43.18 (1.700) 35.56 (1.400) 28.09 (1.106) 15.24 (.600) 28.96 (1.140) 622-1616 16 45.72 (1.800) 38.10 (1.500) 30.63 (1.206) 17.78 (.700) 31.50 (1.240) 622-2016 20 50.80 (2.000) 43.18 (1.700) 35.17 (1.406) 22.86 (.900) 36.58 (1.440) 622-2416 24 55.88 (2.200) 48.26 (1.900) 40.79 (1.606) 27.94 (1.100) 41.66 (1.640) 622-2616 26 58.42 (2.300) 50.80 (2.000) 43.33 (1.706) 30.48 (1.200) 43.18 (1.740) 622-3416 34 68.58 (2.700) 60.96 (2.4000 53.49 (2.106) 40.64 (1.600) 54.36 (2.140) MIL-TYPE AND 622-4016 40 76.20 (3.00) 68.58 (2.700) 61.11 (2.406) 48.26 (1.900) 61.98 (2.440) CENTER SLOT 622-4416 44 81.28 (3.200) 73.66 (2.900) 66.19 (2.606) 53.34 (2.100) 67.06 (2.640) 622-5016 50 88.90 (3.500) 81.28 (3.200) 73.81 (2.906) 60.96 (2.400) 74.68 (2.940) 622-5616 56 96.52 (3.800) 88.90 (3.500) 81.43 (3.206) 68.58 (2.700) 82.30 (3.240) 622-6016 60 101.60 (4.000) 93.98 (3.700) 86.51 (3.406) 73.66 (2.900) 87.38 (3.440) 622-6416 64 106.68 (4.200) 99.06 (3.900) 91.59 (3.606) 78.74 (3.100) For long ejectors, add suffix ES (-XXXXES). For short ejectors, add suffix E (-XXXXE) 92.46 (3.640) Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches). 47