ETC VS303-51N

Switching, Sensing and Control Solutions
from GENTECH INTERNATIONAL LTD
Grangestone Industrial Estate, Girvan, Ayrshire KA26 9PS, United Kingdom
Telephone: +44 (0) 1465-713581. Fax: +44 (0) 1465 714974
Email: [email protected]
Website: gentech-international.co.uk
VS
SERIES
DESIGN
FEATURES
●
High or low level sensing
●
Normally open or
normally closed operation
by float reversal
●
Glass filled polypropylene
or Nylon 6.6 material
●
External fit option with
compression grommet
●
Internal fit option
●
UL Underwriters
Laboratories listed File
No. E98428
●
Sealing washers and
materials suitable for a
wide range of chemicals
●
Reed switch reliability
●
Temperature range up to
130°C
●
Minimum SG 0.70
●
VS4 with UK Water
Research Council
approval for hot and
cold water
●
Top or bottom tank entry
VERTICAL
LIQUID LEVEL
SENSORS
Operational Characteristics
Switch Option
01
03
04
06
08
SPST
Reed
Switch
SPST
Reed
Switch
SPDT
Reed
Switch
SPST
Reed
Switch
SPST
Triac
Volts DC
100
100
100
100
AC only
Volts AC
Amps
Watts
120
1.0
15
250
1.0
15
70
0.5
3
120
3.0
100
250
1.0
Volts
Ohms
300
0.25
800
0.25
200
0.25
400
0.75
400
Contact Configuration
Contact ratings
Maximum (resistive loads)
Minimum withstand
across open contacts
Initial contact resistance
The above contact ratings are for resistive loads. For inductive, capacitive and tungsten filament lamp loads refer to the circuit protection notebook.
Available on 1/2” NPT only.
Environmental Specifications
Housing and Float Material
VS3 - Nylon 6.6
VS4 - WRC approved Glass Filled Polypropylene
VS8 - Glass Filled Polypropylene
Operating Temperature
Minimum Sg
-30º to +130ºC
-30º to +110ºC
-30º to +110ºC
0.85
0.70
0.70
Sealing Washer/Compression Grommet
Silicone
Nitrile
EPDM
-54º to +150ºC
-30º to +110ºC
-54º to +150ºC
Detailed chemical resistance information for specific liquids is available on request.
For boiling water applications the maximum operating temperature limits are:- Continuous boiling water 80ºC. Non continuous boiling water 100ºC.
Mechanical Specification
Mounting
Position
Top or bottom tank entry
travel ±15º vertical
Operate
Window
Shock
Vibration
within 5mm
(0.196”) from float stop
50g for 11ms duration
35g up to 500Hz
(reed switch only)
(reed switch only)
Electrical Connections
Fitted with 2 x 0.5 metres of 18 AWG, 32/0.2mm stranded, with PVC insulation approved to UL/CAS/BS6361.
UL 1015 22AWG Cable x 0.5
Metre Lengths
External
Fitting
23.0 Dia
(0.9)
Hole in Container
Thread M16 x 2 Pitch
Nylon Lock Nut A/F
Container Wall
4.0 Max
(0.15)
12.7 Nom
(0.5)
Friction Relief
Washer
Grommet
86.6 Max
(3.41)
55.8 Max
(2.19)
Float
Travel
Float
Float Stop
22.2 Dia Max
(0.87)
Internal
Fitting
UL 1015 22AWG Cable
x 0.5 Metre
Lengths
16.5 Dia
(0.65)
Hole in Container
Thread M16 x 2 Pitch
Nylon Lock Nut 24 A/F
Container Wall 10.0 Max
(0.39)
12.7 Nom
(0.5)
Lock
Washer
Container Wall
Sealing Washer
Installation
Please contact Sales at
Gentech for installation
instructions (Ref. ????????????????)
Applications
Please contact Sales at
Gentech for applications
relating to this product group.
Float
Travel
86.6 Max
(3.41)
55.8 Max
(2.19)
Float
Float Stop
22.2 Dia Max
(0.87)
GENTECH INTERNATIONAL LTD
Grangestone Industrial Estate, Girvan, Ayrshire KA26 9PS, United Kingdom
Telephone: +44 (0) 1465-713581. Fax: +44 (0) 1465 714974
Email: [email protected]
Website: gentech-international.co.uk
Data Sheet Ref. VS-RS-DS-7000-R1