Transistor 2SD0601A (2SD601A) Silicon NPN epitaxial planer type For general amplification Complementary to 2SB0709A (2SB709A) Unit: mm +0.2 2.8 –0.3 Ratings Unit Collector to base voltage VCBO 60 V Collector to emitter voltage VCEO 50 V Emitter to base voltage VEBO 7 V Peak collector current ICP 200 mA Collector current IC 100 mA Collector power dissipation PC 200 mW Junction temperature Tj 150 ˚C Storage temperature Tstg –55 ~ +150 ˚C ■ Electrical Characteristics 1.45 +0.1 +0.2 0.95 0.95 2.9 –0.05 +0.1 0.16 –0.06 0.1 to 0.3 0.4±0.2 1:Base 2:Emitter 3:Collector JEDEC:TO–236 EIAJ:SC–59 Mini Type Package Marking symbol : Z (Ta=25˚C) Parameter Symbol ICBO Collector cutoff current 3 0 to 0.1 Symbol 1 2 (Ta=25˚C) Parameter 0.65±0.15 0.8 ■ Absolute Maximum Ratings 1.9±0.2 ● High foward current transfer ratio hFE. Low collector to emitter saturation voltage VCE(sat). Mini type package, allowing downsizing of the equipment and automatic insertion through the tape packing and the magazine packing. +0.2 ● 1.1 –0.1 ● 0.65±0.15 0.4 –0.05 ■ Features +0.25 1.5 –0.05 Conditions min typ VCB = 20V, IE = 0 max Unit 0.1 µA 100 µA ICEO VCE = 10V, IB = 0 Collector to base voltage VCBO IC = 10µA, IE = 0 60 V Collector to emitter voltage VCEO IC = 2mA, IB = 0 50 V Emitter to base voltage VEBO IE = 10µA, IC = 0 7 V hFE1 * VCE = 10V, IC = 2mA 160 hFE2 VCE = 2V, IC = 100mA 90 Collector to emitter saturation voltage VCE(sat) IC = 100mA, IB = 10mA 0.1 Transition frequency fT VCB = 10V, IE = –2mA, f = 200MHz 150 MHz Noise voltage NV 110 mV Collector output capacitance Cob 3.5 pF Forward current transfer ratio *h FE1 VCE = 10V, IC = 1mA, GV = 80dB Rg = 100kΩ, Function = FLAT VCB = 10V, IE = 0, f = 1MHz 460 0.3 V Rank classification Rank Q R S hFE1 160 ~ 260 210 ~ 340 290 ~ 460 Marking Symbol ZQ ZR ZS Note.) The Part number in the Parenthesis shows conventional part number. 1 2SD0601A Transistor PC — Ta IC — VCE 1200 Ta=25˚C 50 160 120 80 40 1000 140µA 40 120µA 100µA 30 80µA 60µA 20 40 60 80 100 120 140 160 2 4 6 8 10 Collector to emitter saturation voltage VCE(sat) (V) VCE=10V Ta=25˚C 200 Collector current IC (mA) 160 120 25˚C –25˚C 80 40 160 120 80 40 0 0 1.2 1.6 2.0 0 Base to emitter voltage VBE (V) 200 400 600 1000 –25˚C 200 100 0.3 1 3 10 10 3 1 0.3 25˚C 0.1 30 Collector current IC (mA) 100 Ta=75˚C –25˚C 0.03 0.01 0.1 0.3 1 3 10 30 100 240 240 Noise voltage NV (mV) Transition frequency fT (MHz) Ta=75˚C 300 IC/IB=10 Collector current IC (mA) VCB=10V Ta=25˚C 25˚C 0 0.1 800 300 400 1.0 NV — IC VCE=10V 500 0.8 30 fT — IE 600 0.6 100 Base current IB (µA) hFE — IC 0.4 VCE(sat) — IC 240 0.8 0.2 Base to emitter voltage VBE (V) IC — IB VCE=10V 0.4 0 Collector to emitter voltage VCE (V) 200 0 400 0 0 IC — VBE Ta=75˚C 600 200 20µA 0 20 800 40µA 10 Ambient temperature Ta (˚C) Collector current IC (mA) Base current IB (µA) 200 0 Forward current transfer ratio hFE VCE=10V Ta=25˚C IB=160µA 0 2 IB — VBE 60 Collector current IC (mA) Collector power dissipation PC (mW) 240 180 120 60 VCE=10V GV=80dB Function=FLAT 200 Ta=25˚C 160 Rg=100kΩ 120 80 22kΩ 4.7kΩ 40 0 – 0.1 – 0.3 –1 –3 –10 –30 Emitter current IE (mA) –100 0 10 30 100 300 Collector current IC (mA) 1000 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR