AS-i actuator module Dimensions 18.7 118 Model number 73.5 34.5 Base is sold separately 36 60 4 Electrical connection VAA-4A-G2-E2 G2 flat module 4 outputs AS-i AS-i + M12x1 quick disconnect 4 outputs OUT1 ... OUT4 AUX+ AUX+ 1 AUX- 4 2 3 OUT (nc) Load OUT5 PE AUXPWR U FAULT ® PE ground connection via mounting base Features • • • • • • • • AS-Interface certificate Protection degree IP67 Addressing jack Flat cable connection with cable piercing technique, variable flat cable guide Communication monitoring, turnoff Power supply of outputs from the external auxiliary voltage Ground connection (PE) possible Function display for bus, external auxiliary voltage and outputs Indication/operating means 4 1 3 5 2 3 OUT1 4 1 1 2 OUT2 3 4 5 5 3 4 5 2 OUT3 2 1 OUT4 PWR FAULT ADDR 22.01.2002 AUX Date of Issue Coupling Modules (nc) Subject to reasonable modifications due to technical advances. 249 Copyright Pepperl+Fuchs, Printed in Germany Pepperl+Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com Technical data General specifications Slave type Indicators/operating means LED FAULT LED PWR LED AUX LED OUT Electrical specifications Auxiliary voltage UAUX Rated operational voltage Ue Rated operational current Ie Output Supply Number/Type Voltage Current Ambient conditions Ambient temperature Storage temperature Mechanical specifications Protection degree Connection type P0 P1 P2 P3 Function Standard slave communication error / address is 0; LED red AS-i voltage; LED green ext. auxiliary voltage UAUX ; LED green switching state (output); 4 LED yellow 24 V DC ± 15 % PELV (protection class 3 in accordance with VDE 0106/IEC 364-4-41) 26.5 ... 31.6 V from AS-Interface £ 30 mA from external auxiliary voltage UAUX 4 electronic outputs, PNP ext. auxiliary voltage UAUX - 0.5 V 1.5 A pro output, 4 A total -25 ... 60 °C (248 ... 333 K) -25 ... 85 °C (248 ... 358 K) IP67 according to EN 60529 cable piercing method flat cable yellow/flat cable black inputs/outputs: M12 round connector 100 g Assembly plate The VAA-4A-G2-E2 is an AS-Interface coupling module with four electronic outputs, which can be loaded to 24 V DC and 1.5 A. The IP67 flat module features an integrated addressing jack and is ideal for applications in the field. Connection to the actuators is provided via M12 x 1 screw connections. The current switching state of each channel is indicated by an LED, located on the module's top side. Similarly, an LED is provided to monitor the AS-i communication and to indicate that the module has the address 0. If an AS-Interface communication error occurs, the outputs are de-energised. The voltages of the AS-Interface and of the external power supply are also indicated by an LED each. The U-G3FF mounting base is normally used for the connection of the AS-i flat cable and the external 24 V DC power supply. The specially designed base enables users to connect flat cables from both sides. This means, for example, that 90° curves can be laid with very tight radii (variable flat cable guide). Note: The mounting base for the module is sold separately. S-8.F 8 F input output OUT1 OUT2 OUT3 OUT4 function communication monitoring P0 = 1 (basic setting), monitoring = ON, i.e. if communication fails, the outputs are de-energised P0 = 0, monitoring = OFF, if communication fails, the outputs maintain their condition not used not used not used Matching system components U-G3FF Mounting base for connection to flat cable (ASi and external auxiliary voltage) Accessories VBP-HH1 Hand-held programming device VAZ-PK-1,5M-V1-G Date of Issue 22.01.2002 Connection cable module/hand-held programming device Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany Pepperl+Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com 250 Coupling Modules Mass Mounting Programming instructions Profile IO code ID code Programming instructions (bit configuration) Data bits (function via AS-Interface) D0 D1 D2 D3 Parameter bits (programmable via AS-i) VAA-4A-G2-E2