74ALVC16245 Low-Voltage 1.8/2.5/3.3V 16-Bit Transceiver With 3.6 V–Tolerant Inputs and Outputs (3–State, Non–Inverting) The 74ALVC16245 is an advanced performance, non–inverting 16–bit transceiver. It is designed for very high–speed, very low–power operation in 1.8 V, 2.5 V or 3.3 V systems. The ALVC16245 is designed with byte control. It can be operated as two separate octals, or with the controls tied together, as a 16–bit wide function. The Transmit/Receive (T/Rn) inputs determine the direction of data flow through the bi–directional transceiver. Transmit (active–HIGH) enables data from A ports to B ports; Receive (active–LOW) enables data from B to A ports. The Output Enable inputs (OEn), when HIGH, disable both A and B ports by placing them in a HIGH Z condition. • Designed for Low Voltage Operation: VCC = 1.65–3.6 V • 3.6 V Tolerant Inputs and Outputs • High Speed Operation: 3.0 ns max for 3.0 to 3.6 V • • • • • • • 3.7 ns max for 2.3 to 2.7 V 6.0 ns max for 1.65 to 1.95 V Static Drive: 24 mA Drive at 3.0 V 12 mA Drive at 2.3 V 4 mA Drive at 1.65 V Supports Live Insertion and Withdrawal IOFF Specification Guarantees High Impedance When VCC = 0 V† Near Zero Static Supply Current in All Three Logic States (40 A) Substantially Reduces System Power Requirements Latchup Performance Exceeds 250 mA @ 125°C ESD Performance: Human Body Model >2000 V; Machine Model >200 V Second Source to Industry Standard 74ALVC16245 http://onsemi.com MARKING DIAGRAM 48 48 74ALVC16245DT 1 AWLYYWW TSSOP–48 DT SUFFIX CASE 1201 A WL YY WW 1 = Assembly Location = Wafer Lot = Year = Work Week ORDERING INFORMATION Device Package Shipping 74ALVC16245DTR TSSOP 2500/Tape & Reel †To ensure the outputs activate in the 3–state condition, the output enable pins should be connected to VCC through a pull–up resistor. The value of the resistor is determined by the current sinking capability of the output connected to the OE pin. Semiconductor Components Industries, LLC, 2002 July, 2002 – Rev. 0 1 Publication Order Number: 74ALVC16245/D 74ALVC16245 48 OE1 T/R1 1 B0 2 47 A0 B1 3 46 A1 GND 4 T/R1 1 OE1 24 T/R2 48 OE2 25 45 GND B2 5 44 A2 B3 6 43 A3 VCC 7 42 VCC B4 8 41 A4 B5 9 40 A5 GND 10 A0:7 B0:7 A8:15 B8:15 One of Eight 39 GND B6 11 38 A6 B7 12 37 A7 B8 13 36 A8 B9 14 35 A9 GND 15 34 GND B10 16 33 A10 B11 17 32 A11 VCC 18 31 VCC B12 19 30 A12 B13 20 29 A13 GND 21 28 GND B14 22 27 A14 B15 23 26 A15 T/R2 24 25 OE2 Figure 2. Logic Diagram 1 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 Figure 1. 48–Lead Pinout (Top View) PIN NAMES Pins Function OEn T/Rn A0–A15 B0–B15 Output Enable Inputs Transmit/Receive Inputs Side A Inputs or 3–State Outputs Side B Inputs or 3–State Outputs EN1 EN2 EN3 EN4 T/R1 48 OE1 25 OE2 24 T/R2 47 1 46 2 1∇ 3 5 44 43 41 1 6 8 2∇ 40 9 38 11 37 36 1 3∇ 12 13 14 35 16 33 32 30 1 4∇ 17 19 29 20 27 22 26 23 B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12 B13 B14 B15 Figure 3. IEC Logic Diagram Inputs Inputs OE1 T/R1 L L L H O tp ts Outputs O tp ts Outputs OE2 T/R2 Bus B0:7 Data to Bus A0:7 L L Bus B8:15 Data to Bus A8:15 H Bus A0:7 Data to Bus B0:7 L H Bus A8:15 Data to Bus B8:15 X High Z State on A0:7, B0:7 H X High Z State on A8:15, B8:15 H = High Voltage Level; L = Low Voltage Level; X = High or Low Voltage Level and Transitions Are Acceptable http://onsemi.com 2 74ALVC16245 MAXIMUM RATINGS (Note 1) Symbol Parameter Value Unit VCC DC Supply Voltage 0.5 to 4.6 V VI DC Input Voltage 0.5 to 4.6 V VO DC Output Voltage 0.5 to 4.6 V IIK DC Input Diode Current VI < GND 50 mA IOK DC Output Diode Current VO < GND 50 mA IO DC Output Sink/Source Current 50 mA ICC DC Supply Current per Supply Pin 100 mA IGND DC Ground Current per Ground Pin 100 mA TSTG Storage Temperature Range 65 to 150 °C TL Lead Temperature, 1 mm from Case for 10 Seconds TJ Junction Temperature Under Bias JA Thermal Resistance (Note 2) MSL Moisture Sensitivity FR Flammability Rating VESD ESD Withstand Voltage Human Body Model (Note 3) Machine Model (Note 4) Charged Device Model (Note 5) 2000 200 N/A V ILATCH–UP Latch–Up Performance Above VCC and Below GND at 125°C (Note 6) 250 mA 260 °C 150 °C 90 °C/W Level 1 Oxygen Index: 30% – 35% UL 94 V–0 @ 0.125 in Maximum Ratings are those values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. Functional operation under absolute maximum–rated conditions is not implied. Functional operation should be restricted to the Recommended Operating Conditions. 1. IO absolute maximum rating must be observed. 2. Measured with minimum pad spacing on an FR4 board, using 10 mm–by–1 inch, 2–ounce copper trace with no air flow. 3. Tested to EIA/JESD22–A114–A. 4. Tested to EIA/JESD22–A115–A. 5. Tested to JESD22–C101–A. 6. Tested to EIA/JESD78. RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Typ Max Unit Operating Data Retention Only 1.65 1.2 3.3 3.3 3.6 3.6 V (Note 7) –0.5 3.6 V 0 0 VCC 3.6 V –40 +85 °C 0 0 20 10 ns/V VCC Supply Voltage VI Input Voltage VO Output Voltage TA Operating Free–Air Temperature t/V Input Transition Rise or Fall Rate, VIN from 0.8 V to 2.0 V, VCC = 2.5 V 0.2 V VCC = 3.0 V 0.3 V (Active State) (3–State) 7. Unused inputs may not be left open. All inputs must be tied to a high–logic voltage level or a low–logic input voltage level. http://onsemi.com 3 74ALVC16245 DC ELECTRICAL CHARACTERISTICS TA = –40°C to +85°C Symbol VIH VIL VOH VOL Characteristic HIGH Level Input Voltage (Note 8) LOW Level Input Voltage (Note 8) HIGH Level Output Voltage LOW Level Output Voltage Condition Min Max 1.65 V ≤ VCC < 2.3 V 0.65 x VCC 2.3 V ≤ VCC ≤ 2.7 V 1.7 2.7 V < VCC ≤ 3.6 V 2.0 V 1.65 V ≤ VCC < 2.3 V 0.35 x VCC 2.3 V ≤ VCC ≤ 2.7 V 0.7 2.7 V < VCC ≤ 3.6 V 0.8 1.65 V ≤ VCC ≤ 3.6 V; IOH = –100 A VCC – 0.2 VCC = 1.65 V; IOH = –4 mA 1.2 VCC = 2.3 V; IOH = –6 mA 2.0 VCC = 2.3 V; IOH = –12 mA 1.7 VCC = 2.7 V; IOH = –12 mA 2.2 VCC = 3.0 V; IOH = –12 mA 2.4 VCC = 3.0 V; IOH = –24 mA 2.0 Unit V V 1.65 V ≤ VCC ≤ 3.6 V; IOL = 100 A 0.2 VCC = 1.65 V; IOL = 4 mA 0.45 VCC = 2.3 V; IOL = 6 mA 0.4 VCC = 2.3 V; IOL = 12 mA 0.7 VCC = 2.7 V; IOL = 12 mA 0.4 V VCC = 3.0 V; IOL = 24 mA 0.55 II Input Leakage Current 1.65 V ≤ VCC ≤ 3.6 V; 0 V ≤ VI ≤ 3.6 V ±5.0 A IOZ 3–State Output Current 1.65 V ≤ VCC ≤ 3.6 V; 0 V ≤ VO ≤ 3.6 V; VI = VIH or VIL ±10 A IOFF Power–Off Leakage Current ICC Quiescent Supply Current (Note 9) ICC VCC = 0 V; VI or VO = 3.6 V 10 A 1.65 V ≤ VCC ≤ 3.6 V; VI = GND or VCC 40 A 1.65 V ≤ VCC ≤ 3.6 V; 3.6 V ≤ VI, VO ≤ 3.6 V ±40 A 2.7 V < VCC ≤ 3.6 V; VIH = VCC – 0.6 V 750 A Increase in ICC per Input 8. These values of VI are used to test DC electrical characteristics only. 9. Outputs disabled or 3–state only. AC CHARACTERISTICS (Note 10; tR = tF = 2.0 ns; CL = 30 pF; RL = 500 ) Limits TA = –40°C to +85°C VCC = 3.0 V to 3.6 V Symbol Parameter VCC = 2.3 V to 2.7 V VCC = 1.65 to1.95 V Waveform Min Max Min Max Min Max Unit tPLH tPHL Propagation Delay Input to Output 1 1.0 1.0 3.0 3.0 1.0 1.0 3.7 3.7 1.0 1.0 6.0 6.0 ns tPZH tPZL Output Enable Time to High and Low Level 2 1.0 1.0 4.4 4.4 1.0 1.0 5.7 5.7 1.0 1.0 9.3 9.3 ns tPHZ tPLZ Output Disable Time From High and Low Level 2 1.0 1.0 4.1 4.1 1.0 1.0 5.2 5.2 1.0 1.0 7.6 7.6 ns tOSHL tOSLH Output–to–Output Skew (Note 11) 0.75 0.75 ns 0.5 0.5 0.5 0.5 10. For CL = 50 pF, add approximately 300 ps to the AC maximum specification. 11. Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH–to–LOW (tOSHL) or LOW–to–HIGH (tOSLH); parameter guaranteed by design. http://onsemi.com 4 74ALVC16245 CAPACITIVE CHARACTERISTICS Symbol Parameter Condition Typical Unit CIN Input Capacitance Note 12 6 pF COUT Output Capacitance Note 12 7 pF CPD Power Dissipation Capacitance Note 12, 10 MHz 20 pF 12. VCC = 1.8, 2.5 or 3.3 V; VI = 0 V or VCC. VIH Vm An, Bn Vm tPLH 0V tPHL Vm Bn, An VOH Vm VOL WAVEFORM 1 - PROPAGATION DELAYS tR = tF = 2.0ns, 10% to 90%; f = 1MHz; tW = 500ns VIH Vm OEn, T/Rn Vm 0V tPZH tPHZ VOH Vy Vm An, Bn ≈ 0V tPZL tPLZ ≈ VCC Vm An, Bn Vx VOL WAVEFORM 2 - OUTPUT ENABLE AND DISABLE TIMES tR = tF = 2.0ns, 10% to 90%; f = 1MHz; tW = 500ns Figure 4. AC Waveforms VCC Symbol 3.3 V ±0.3 V 2.5 V ±0.2 V 1.8 V ±0.15 V VIH 2.7 V VCC VCC Vm 1.5 V VCC/2 VCC/2 Vx VOL + 0.3 V VOL + 0.15 V VOL + 0.15 V Vy VOH – 0.3 V VOH – 0.15 V VOH – 0.15 V http://onsemi.com 5 74ALVC16245 VCC PULSE GENERATOR RL DUT RT CL TEST RL SWITCH tPLH, tPHL Open tPZL, tPLZ 6 V at VCC = 3.3 ±0.3 V; VCC× 2 at VCC = 2.5 ±0.2 V; 1.8 V ±0.15 V tPZH, tPHZ GND CL = 30 pF or equivalent (Includes jig and probe capacitance) RL = 500 or equivalent RT = ZOUT of pulse generator (typically 50 ) Figure 5. Test Circuit http://onsemi.com 6 6V or VCC × 2 OPEN GND 74ALVC16245 P0 K t P2 D TOP COVER TAPE E A0 + K0 SEE NOTE 2 B1 10 PITCHES CUMULATIVE TOLERANCE ON TAPE ±0.2 mm (±0.008") SEE NOTE 2 F + B0 W + D1 FOR COMPONENTS 2.0 mm × 1.2 mm AND LARGER P EMBOSSMENT FOR MACHINE REFERENCE ONLY INCLUDING DRAFT AND RADII CONCENTRIC AROUND B0 CENTER LINES OF CAVITY USER DIRECTION OF FEED *TOP COVER TAPE THICKNESS (t1) 0.10 mm (0.004") MAX. R MIN. BENDING RADIUS 10° TAPE AND COMPONENTS SHALL PASS AROUND RADIUS R" WITHOUT DAMAGE EMBOSSED CARRIER 100 mm (3.937") MAXIMUM COMPONENT ROTATION EMBOSSMENT 1 mm MAX TYPICAL COMPONENT CAVITY CENTER LINE TAPE 1 mm (0.039") MAX TYPICAL COMPONENT CENTER LINE 250 mm (9.843") CAMBER (TOP VIEW) ALLOWABLE CAMBER TO BE 1 mm/100 mm NONACCUMULATIVE OVER 250 mm Figure 6. Carrier Tape Specifications EMBOSSED CARRIER DIMENSIONS (See Notes 1 and 2) Tape Size B1 Max 24mm 20.1mm (0.791") D D1 E F K P P0 P2 R T W 1.5 + 0.1mm -0.0 (0.059 +0.004" -0.0) 1.5mm Min (0.060") 1.75 ±0.1 mm (0.069 ±0.004") 11.5 ±0.10 mm (0.453 ±0.004") 11.9 mm Max (0.468") 16.0 ±0.1 mm (0.63 ±0.004") 4.0 ±0.1 mm (0.157 ±0.004") 2.0 ±0.1 mm (0.079 ±0.004") 30 mm (1.18") 0.6 mm (0.024") 24.3 mm (0.957") 1. Metric Dimensions Govern–English are in parentheses for reference only. 2. A0, B0, and K0 are determined by component size. The clearance between the components and the cavity must be within 0.05 mm min to 0.50 mm max. The component cannot rotate more than 10° within the determined cavity. http://onsemi.com 7 74ALVC16245 t MAX 13.0 mm ±0.2 mm (0.512" ±0.008") 1.5 mm MIN (0.06") A 20.2 mm MIN (0.795") 50 mm MIN (1.969") FULL RADIUS G Figure 7. Reel Dimensions REEL DIMENSIONS Tape Size A Max G t Max 24 mm 360 mm (14.173") 24.4 mm + 2.0 mm, -0.0 (0.961" + 0.078", -0.00) 30.4 mm (1.197") DIRECTION OF FEED BARCODE LABEL POCKET Figure 8. Reel Winding Direction http://onsemi.com 8 HOLE 74ALVC16245 CAVITY TAPE TOP TAPE TAPE TRAILER (Connected to Reel Hub) NO COMPONENTS 160 mm MIN TAPE LEADER NO COMPONENTS 400 mm MIN COMPONENTS DIRECTION OF FEED Figure 9. Tape Ends for Finished Goods User Direction of Feed Figure 10. Reel Configuration ÉÉ ÉÉ ÉÉ É ÉÉ É ÉÉ ÉÉ ÉÉ É ÉÉ É ÉÉ ÉÉÉÉÉÉÉÉ ÉÉ ÉÉ ÉÉ É ÉÉ É ÉÉ ÉÉÉÉÉÉÉÉ ÉÉ ÉÉ ÉÉ ÉÉ É ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ É ÉÉ ÉÉÉÉ ÉÉÉÉÉÉÉ ÉÉ ÉÉ ÉÉ ÉÉ É ÉÉ ÉÉÉÉ ÉÉÉÉÉÉÉ K L G 48 Leads Figure 11. Package Footprint http://onsemi.com 9 F 74ALVC16245 PACKAGE DIMENSIONS TSSOP DT SUFFIX CASE 1201–01 ISSUE A 48X ÉÉÉ ÇÇÇ ÇÇÇ ÉÉÉ ÇÇÇ ÉÉÉ K K1 K REF 0.12 (0.005) M T U S V S T U S J J1 48 25 0.254 (0.010) M SECTION N–N B –U– L N 1 24 A –V– PIN 1 IDENT. N F DETAIL E D 0.076 (0.003) –T– SEATING PLANE NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. MOLD FLASH OR GATE BURRS SHALL NOT EXCEED 0.15 (0.006) PER SIDE. 4. DIMENSION K DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN EXCESS OF THE K DIMENSION AT MAXIMUM MATERIAL CONDITION. 5. TERMINAL NUMBERS ARE SHOWN FOR REFERENCE ONLY. 6. DIMENSIONS A AND B ARE TO BE DETERMINED AT DATUM PLANE -W-. C M 0.25 (0.010) –W– DETAIL E G H http://onsemi.com 10 DIM A B C D F G H J J1 K K1 L M MILLIMETERS MIN MAX 12.40 12.60 6.00 6.20 --1.10 0.05 0.15 0.50 0.75 0.50 BSC 0.37 --0.09 0.20 0.09 0.16 0.17 0.27 0.17 0.23 7.95 8.25 0 8 INCHES MIN MAX 0.488 0.496 0.236 0.244 --0.043 0.002 0.006 0.020 0.030 0.0197 BSC 0.015 --0.004 0.008 0.004 0.006 0.007 0.011 0.007 0.009 0.313 0.325 0 8 74ALVC16245 Notes http://onsemi.com 11 74ALVC16245 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada Email: [email protected] JAPAN: ON Semiconductor, Japan Customer Focus Center 2–9–1 Kamimeguro, Meguro–ku, Tokyo, Japan 153–0051 Phone: 81–3–5773–3850 Email: [email protected] ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. N. American Technical Support: 800–282–9855 Toll Free USA/Canada http://onsemi.com 12 74ALVC16245/D