Two-Way Isolated Power Dividers Microstrip 2091/2092 Series V2.00 Features ● ● ● ● ● ● ● ● Excellent Amplitude and Phase Balance High Isolation Between Output Ports Wideband Frequency Coverage Low Insertion Loss Low VSWR Power: 5.0 – 20 Watts Input Maximum, with Matched Terminations Temperature Range: -54°C to +125°C Meets MIL-E-5400 Environments Description Ceramic microstrip construction techniques are utilized to achieve small size and high performance. Sliding contact connectors ensure high reliability over the temperature range. This type of construction can handle higher power when proper heat sinking is used. All dimensions are ±.020, except mounting hole diameters (±.005) and mounting hole location (±.010). These high performance units operate over octave and multi-octave bandwidths. Typical Performance Part No. 2092-6209-00 Specifications PART NO. FREQUENCY RANGE (GHz) VSWR (max.) ISOLATION (dB min.) INSERTION LOSS (dB max.) 2091-6204-00 2091-6201-00 2091-6202-00 2092-6209-00 0.9-4.0 1.0-2.0 2.0-4.0 4.0-18.0 1.50 1.30 1.35 1.70 18 20 20 16 1.0 0.4 0.6 0.1+.08f (GHz) OUTPUT UNBALANCE AMP. PHASE (dB) (deg.) 0.3 5.0 0.2 2.0 0.2 4.0 0.3 1.0f (GHz) MAXIMUM INPUT POWER* (watts) 5.0 5.0 5.0 20.0 *Maximum input power with output loads of VSWR ≤2.0:1. Derate to 10% of listed value when arbitrarily terminated. M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. 6-17 WEIGHT oz. 1.3 1.3 1.3 1.3 g 37 37 37 37