D.C. direct drive motors Ø 63 mm For low-speed drive applications ■ Maximum usable power: 33 W ■ Ø 63 mm : With 2 ball bearings Supply connection by 2 leads ■ Type 82 830 0 Applications Nominal voltage - Automatic swimming-pool cleaners - Filtering systems - Water circulators for whirlpool baths - Paper drives for photocopiers - Opening/closing of automatic doors - Machines for making spectacle lenses 12 V Part number 82 830 009 Standard Characteristics Speed Absorbed power Absorbed current rpm W A 2100 4.8 0.4 rpm mN.m W W A °C % 1500 172 27 43 3.6 50 62 Characteristics - nominal Speed Torque Output power Absorbed power Absorbed current Gearbox case temperature rise Efficiency General characteristics 1 Made to order products, available on request - other supply voltages - shaft lengths at front and/or rear - integrated interference suppression (82 830) - shaft encoders - other front and rear fixing plates - short version possible (L = 90 mm) Insulation class (conforming to IEC 85) Degree of protection (IEC 529) Maximum usable power Start torque Start current Resistance Resistance : inductive Torque constant Electrical time constant Mechanical time constant Thermal time constant Inertia Weight No of segments Life Ball bearings Lead length A - Torque/Speed curves B - Torque/Current curves W mN.m A Ω mH Nm/A ms ms min g.cm2 g h mm F (155 °C) IP20 33 600 12 1 1.4 0.0517 1.4 19 37 514 840 12 5000 yes 200 A rpm Other information Basic principles see page 1/5. 1/14 82 830 0 82 830 0 24 V 48 V 1 Dimensions 2 82 830 0 3 82 830 010 F (155 °C) IP20 33 600 6.2 3.9 6.4 0.1 1.64 19 37 492 840 12 5000 yes 200 F (155 °C) IP20 33 600 3 16 26.3 0.2069 1.64 30 37 496 840 12 5000 yes 200 90° 90° ° 13 103 max. 4 holes M5 on Ø 40 depth 7 mm B To order, specify : 3 Part number Example : D.C. direct drive motor - 82 830 009 ● Standard products, non stocked 1 30' 25° 25±0.5 4 holes M5 on Ø 40 depth 7 mm 1 82 830 0 Standard products 2.5±0.1 Ø8 -0.010 -0.022 1500 172 27 43 0.9 50 62 2.5±0.1 90° 1500 172 27 45 1.9 50 60 25°30' Ø63.2 max. -0 Ø25 -0.05 2100 4.8 0.1 Ø25-0 -0.05 4 holes Ø 3.65 ± 0.05 at 90° on Ø 48 2100 4.8 0.2 200 ±10 ● 2 Type Nominal voltage Example : D.C. direct drive motor - 82 830 0 - 48 V 1/15