2 3 2 2 3 1 1 4 1 Anti-Parallel 3 7 22 OT 4 S 4 Parallel APT2X30/31S20J 200V 30A DUAL DIE ISOTOP® PACKAGE HIGH VOLTAGE SCHOTTKY DIODES PRODUCT APPLICATIONS PRODUCT FEATURES PRODUCT BENEFITS • Parallel Diode • Ultrafast Recovery Times • Low Losses • Soft Recovery Characteristics • Low Noise Switching • Popular SOT-227 Package • Cooler Operation • Low Forward Voltage • Higher Reliability Systems • High Blocking Voltage • Increased System Power • • • • • -Switchmode Power Supply -Inverters Free Wheeling Diode -Motor Controllers -Converters Snubber Diode Uninterruptible Power Supply (UPS) 48 Volt Output Rectifiers High Speed Rectifiers • Low Leakage Current MAXIMUM RATINGS Symbol VR Density All Ratings are per diode: TC = 25°C unless otherwise specified. Characteristic / Test Conditions APT/2X30/31S20J Maximum D.C. Reverse Voltage L A C I N H C N E T O I E T C MA N A OR V AD INF 200 VRRM Maximum Peak Repetitive Reverse Voltage VRWM Maximum Working Peak Reverse Voltage IF(AV) Maximum Average Forward Current (TC = 110°C, Duty Cycle = 0.5) 30 RMS Forward Current 101 Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3mS) TBD IF(RMS) IFSM TJ,TSTG TL EAVL UNIT Volts Amps -55 to 150 Operating and StorageTemperature Range Lead Temperature: 0.063" from Case for 10 Sec. 300 Avalanche Energy (2A, 15mH) 30 °C mJ STATIC ELECTRICAL CHARACTERISTICS Maximum Forward Voltage Maximum Reverse Leakage Current IRM MIN TYP MAX IF = 30A 0.80 0.85 IF = 60A 0.82 UNIT Volts IF = 30A, TJ = 150°C 0.80 VR = VR Rated 0.50 mA 15 VR = VR Rated, TJ = 125°C CT Junction Capacitance, VR = 100V 143 pF LS Series Inductance (Lead to Lead 5mm from Base) 10 nH APT Website - http://www.advancedpower.com 8-2002 VF Characteristic / Test Conditions 053-6033 Rev B Symbol APT/2X30/31S20J DYNAMIC CHARACTERISTICS Symbol Characteristic MIN TYP MAX TBD TBD trr1 Reverse Recovery Time, IF = 1.0A, diF /dt = -15A/µs, VR = 30V, TJ = 25°C trr2 Reverse Recovery Time trr3 IF = 30A, diF /dt = -100A/µs, VR = 100V TJ = 100°C 95 tfr1 Forward Recovery Time TJ = 25°C TBD tfr2 IF = 30A, diF /dt = 100A/µs, VR = 100V TJ = 100°C TBD IRRM1 Reverse Recovery Current TJ = 25°C 3.7 IRRM2 IF = 30A, diF /dt = -100A/µs, VR = 100V TJ = 100°C 5.5 Qrr1 Recovery Charge TJ = 25°C 142 Qrr2 IF = 30A, diF /dt = -100A/µs, VR = 100V TJ = 100°C 300 Vfr1 Forward Recovery Voltage TJ = 25°C TBD Vfr2 IF = 30A, diF /dt = 100A/µs, VR = 100V TJ = 100°C TBD Rate of Fall of Recovery Current TJ = 25°C TBD IF = 30A, diF /dt = -100A/µs, VR = 100V TJ = 100°C TBD diM/dt UNIT 67 TJ = 25°C L A C I N H C N E T O I E T C MA N A OR V AD INF ns Amps nC Volts A/µs THERMAL AND MECHANICAL CHARACTERISTICS Symbol MIN Characteristic / Test Conditions TYP RθJC Junction-to-Case Thermal Resistance 1.3 RθJA Junction-to-Ambient Thermal Resistance 20 VIsolation WT Torque 2500 RMS Voltage (50-60 Hz Sinusoidal Waveform from Terminals to Mounting Base for 1 Min.) Volts 1.03 oz 29.2 gm Package Weight SOT-227 Package Outline 13.6 lb•in 1.5 N•m Maximum Torque (Mounting = 8-32 or 4mm Machine and Terminals = 4mm Machine) SOT-227 Package Outline 11.8 (.463) 12.2 (.480) 31.5 (1.240) 31.7 (1.248) 7.8 (.307) 8.2 (.322) r = 4.0 (.157) (2 places) 8.9 (.350) 9.6 (.378) Hex Nut M4 H100 (4 places) W=4.1 (.161) W=4.3 (.169) H=4.8 (.187) H=4.9 (.193) (4 places) 25.2 (0.992) 0.75 (.030) 12.6 (.496) 25.4 (1.000) 0.85 (.033) 12.8 (.504) 4.0 (.157) 4.2 (.165) (2 places) 3.3 (.129) 3.6 (.143) 8-2002 UNIT °C/W APT Reserves the right to change, without notice, the specifications and information contained herein. 053-6033 Rev B MAX 1.95 (.077) 2.14 (.084) 14.9 (.587) 15.1 (.594) 30.1 (1.185) 30.3 (1.193) Anti-parallel Parallel APT2X30S20J APT2X31S20J Anode 2 Cathode 1 Cathode 1 Anode 1 Anode 1 Anode 2 38.0 (1.496) 38.2 (1.504) Dimensions in Millimeters and (Inches) APT's devices are covered by one or more of the following U.S.patents: ISOTOP® is a Registered Trademark of SGS Thomson. Cathode 2 4,895,810 5,256,583 5,045,903 4,748,103 Cathode 2 5,089,434 5,283,202 5,182,234 5,231,474 5,019,522 5,434,095 5,262,336 5,528,058