PD - 93873A IRGC100B120UB Die in Wafer Form Features G Benefits • • • • 1200V IC(nom)= 100A VCE(on) typ.= 3.1V @ IC(nom) @ 25°C UltraFast IGBT Short Circuit Rated 150mm Wafer C • GEN5 Non Punch Through (NPT) Technology • Low VCE(on) • 10µs Short Circuit Capability • Square RBSOA • Positive VCE(on) Temperature Coefficient Benchmark Efficiency above 20KHz Optimized for Welding, UPS, and Induction Heating Rugged with Ultra Fast Performance Excellent Current Sharing in Parallel Operation E Electrical Characteristics (Wafer Form) Parameter VCE (on) V(BR)CES VGE(th) ICES IGES Description Guaranteed (min, max) Collector-to-Emitter Saturation Voltage 1.43V min, 1.64V max Colletor-to-Emitter Breakdown Voltage 1200V min Gate Threshold Voltage 4.4V min, 6.0V max Zero Gate Voltage Collector Current 40µA max Gate-to-Emitter Leakage Current ± 3 µA max Test Conditions I C = 10A, TJ = 25°C, VGE = 15V TJ = 25°C, ICES = 1mA, VGE = 0V VGE = VCE , TJ =25°C, IC = 1mA TJ = 25°C, VCE = 1200V TJ = 25°C, VGE = +/-20V Mechanical Data Nominal Backmetal Composition, (Thickness) Nominal Front Metal Composition, (Thickness) Dimensions Wafer Diameter Wafer Thickness, Tolerance Relevant Die Mechanical Dwg. Number Minimum Street Width Reject Ink Dot Size Ink Dot Location Recommended Storage Environment Al - Ti - Ni/V - Ag, (1kA - 1kA - 4kA - 6kA) 99% Al/1% Si, (4µm) 0.488" x 0.488" 150mm, with std. < 100 > flat 185µm, +/-15µm 01-5318 100µm 0.25mm diameter minimum Consistent throughout same wafer lot Store in original container, in dessicated nitrogen, with no contamination For optimum electrical results, die attach temperature should not exceed 300°C Recommended Die Attach Conditions Die Outline 12.396 [.488] NOT ES : 1. ALL DIMENS IONS ARE S HOWN IN MILLIMETERS [INCHES]. 11.004 [.433] 2. CONTROLLING DIMENS ION: [INCH]. 3. LET T ER DES IGNATION: S = S OURCE S K = SOURCE KELVIN G = GAT E IS = CURRENT SENS E E = EMIT T ER 4. DIMENSIONAL T OLERANCES : 10.921 [.430] BONDING PADS : EMIT TER 1.065 [.042] WIDTH & LENGT H G 1.096 [.043] www.irf.com 01-5318 < 0.635 TOLERANCE = + /- 0.013 < [.0250] T OLERANCE = + /- [.0005] > 0.635 TOLERANCE = + /- 0.025 > [.0250] T OLERANCE = + /- [.0010] OVERALL DIE: < 1.270 TOLERANCE = + /- 0.102 WIDTH < [.050] T OLERANCE = + /- [.004] & > 1.270 TOLERANCE = + /- 0.203 LENGT H > [.050] T OLERANCE = + /- [.008] 6/20/2000