TEK 100-300 Series Literature 29/5/01 8:33 am Page 1 TEK 100-300 SERIES SWITCH MODE POWER SUPPLIES 100-300 WATTS SWITCH MODE POWER SUPPLIES 100-300 WATTS FEATURES Universal AC input Single, dual, triple, quad outputs World-wide agency approval 100% Burn-in, hi pot tested Stock to 6 week delivery High quality Superior performance Price competitive Tektris™ TEK 100-300 SERIES Marked TEK 100-300 Series Literature 29/5/01 8:33 am Page 2 SPECIFICATION SWITCH MODE POWER SUPPLIES 100-300 WATTS TEK 100-300 SERIES DESCRIPTION The TEK Series Switch Mode Power Supplies are available in single, dual, triple and quad output models and provide output power from 100 to 300 watts. All TEK Series Switchers are low profile and are available in an open-frame or covered configuration. The TEK Series is an ideal choice and a powerful solution for any application where up to 300 watts may be required. SPECIFICATION AC Input Specifications Input Voltage: Input Frequency: Inrush Current: Efficiency: DC Output Specifications Output Voltage: Voltage Adjust: Output Current: Output Power(Watts): Line/Load Regulation Max.: Ripple and Noise: Turn-On Delay: Hold-up Time: Overshoot: Step Load Response The TEK 100/200/300: Environmental Conditions Operating Temp.: Temperature Coefficient: Storage Temp.: Cooling: Operating Humidity: Storage Humidity: Vibration: Safety Specification Safety: Emissions: Leakage: TEK100, 90-264V AC TEK200/300, 90-132/180-264V AC 47-63 Hz. (Cold Start): 40A (max)@115V AC, 80A (max)@230V AC 70% Typical @ Full Load See Model Chart Main output(V1) +/-5% of rated output. See Model Chart See Model Chart +/-5% +/-1% p-p 1 sec. max.@120V AC 20ms @ 120V AC and 80% of rated load. Not to exceed 5% over nominal voltage With a 20% dynamic load change the output will vary <=3%. Recovery is within the 1% regulation window within 300µS. 0-40°C. For operation above 40 °C, derate 2.5% per °C. 0.1% per °C max. -20 to 85 °C. TEK200&300 require 22CFM to operate at full load. 5%-95% RH, non-condensing. 5%-95% RH, non-condensing. Frequency 5 to 50 Hz, Acceleration +/-7.35M/(SxS) on X,Y,Z axis. UL, cUL, CE, TUV, VDE FCC Part 15 subject J, Class B, CISPR 22 Class B AC leakage current shall not exceed 5mA when the power supply is connected to a supply voltage equal to the upper limit of the rated voltage range. MODEL NUMBERS AND OUTPUT RATINGS TEK100Series Model Output V1 Number Voltage Current Voltage 5V 12V 15V 24V 48V 5V 5V 5V 5V 5V 5V 5V 5V 12V 5A (9A PK) 15V 4A (6A PK) 24V 2.5A (6A PK) 12V 5A (9A PK) 15V 4A (6A PK) 12V 5A (9APK) 15V 4A (6A PK) 24V 2A (3A PK) TEK100S01 TEK100S02 TEK100S03 TEK100S04 TEK100S09 TEK100D12 TEK100D13 TEK100D14 TEK100T16 TEK100T17 TEK100Q56 TEK100Q57 TEK100Q86 20A (30APK) 8.5A (12A PK) 6.5A (10A PK) 4.5A (8A PK) 2A (3A PK) 10A (15A PK) 10A (15A PK) 10A (15A PK) 10A (15A PK) 10A (15A PK) 10A (15A PK) 10A (15A PK) 10A (15A PK) Output V2 Current Output V3 Voltage 12V 15V 12V 15V 12V Current 0.5A (1A PK) 0.5A (1A PK) 0.5A (1A PK) 0.5A (1A PK) 0.5A (1A PK) Output V4 Voltage Current 5V 0.5A (1A PK) 5V 0.5A (1A PK) 12V 0.5A (1A PK) Note: All peak surge currents are less than 30ms and less than 50% duty cycle. TEK 100-300 Series Literature 29/5/01 8:34 am Page 3 SPECIFICATION TEK200 Series Model Number TEK200SA TEK200SB TEK200SC TEK200SC TEK200SD TEK200SE TEK200D12 TEK200D13 TEK200D14 TEK200T16 TEK200T17 TEK200Q56 TEK200Q57 TEK200Q86 Output V1 Voltage Current 3.3V 5V 12V 15V 24V 48V 5V 5V 5V 5V 5V 5V 5V 5V Output V3 Voltage Current 40A 40A 16.7A 13.3A 8.3A 4.2A 20A 20A 20A 18A 20A 20A 20A 15A Output V4 Voltage Current Output V2 Voltage Current SWITCH MODE POWER SUPPLIES 100-300 WATTS TEK 100-300 SERIES 12V 15V 24V 12V 15V 12V 15V 24V 8A 6.6A 4.2A 8A 5A 6A 5A 3A 12V 15V 12V 15V 12V 1.0A 1.0A 1.0A 1.0A 1.0A 5V 5V 12V 1.0A 1.0A 1.0A TEK300 Series Model Number TEK300SA TEK300SB TEK300SC TEK300SC TEK300SD TEK300SE TEK300D12 TEK300D13 TEK300D14 TEK300T16 TEK300T17 TEK300Q56 TEK300Q57 TEK300Q86 Output V1 Voltage Current 3.3V 5V 12V 15V 24V 48V 5V 5V 5V 5V 5V 5V 5V 5V Output V3 Output V4 (Floating) Output V2 Voltage Current Voltage Current Voltage Current 60A 60A 25A 20A 12.5A 6.3A 30A 30A 30A 30A 30A 30A 30A 30A 12V 15V 24V 12V 15V 12V 15V 24V 12A 10A 6.2A 10A 8A 10A 7A 5A 12V 15V 12V 15V 12V 2A 2A 2A 2A 2A 5V 5V 12V 2A 2A 2A STANDARD ELECTRICAL FEATURES Overcurrent Protection Current limits at 110-115% of rated output current and recovers automatically. Overvoltage Protection Output is protected against overvoltage. Unit latching will occur when output exceeds 130%. Recycle AC Input to reset. Cold Start The power supply shall operate properly when power is first applied in a 10 °C environment after storage for 8 hours. Power Supply On Green LED indicates when the power supply is on. Power Good Designated as PG on the PCB. This is a power on reset signal. Signal will go high when the output reaches the regulation limit. It will go low 2-4 msec prior to losing regulation. The signal is available from a 2 pin Molex. AC Good Yellow LED designated as AC good. The LED will be on when signal is low and when the AC input is within its operating range. DC Good When the output is above the factory preset level the orange LED on the PCB will go on and the signal will be low. Remote on-off Designated as REMO SW on the PCB. Note: Features explained aboveare not available on all models. Design developments may result in specification changes Over Temp. Protection Short Circuit can be continuous without damage and recovers automatically. 20.60 (0.81) 166.00 (6.50) REF. 120.5 (4.744) M3 4PLC NOTES: UNLESS OTHERWISE SPECIFIED 1. DIMENSIONS ARE IN MILLIMETRES (INCHES). 2. MATERIAL: ALUMINUM, 2MM (0.08 INCH) THICK. 3. FINISH: NONE. 4. MAX MOUNTING SCREW PROTRUSION = 3.5MM. 5. VIEWS SHOWN ARE NOT TO SCALE. 5.00 (0.20) 43.20 (1.70) COVER HEIGHT FRONT VIEW MOLEX CONNECTOR INPUT OPTION MATING #09-91-0500 TERMINAL #08-52-0072 (POSITIONS 2 & 4 ARE NOT POPULATED) CHASSIS AC NEUTRAL AC LINE 5.00 (0.20) M3 2PLC FUSE 3A/250V 1 155.00 (6.10) SIDE VIEW 166.00 (6.54) TOP VIEW 1 1 PIN10 REMOVED 1 V1+ V2+ RTN V4 V4 RTN V3 V3 RTN MULTIPLE OUTPUT OPTION MOLEX CONNECTOR 2PL MOLEX CONNECTOR MATING #09-91-1400 MATING #09-91-0500 TERMINAL #08-52-0072 TERMINAL #08-52-0072 OUTPUT + OUTPUT RETURN SINGLE OUTPUT OPTION TEK 100-300 SERIES 76.00 (2.99) MOUNTING HOLE LOCATIONS TOP VIEW SWITCH MODE POWER SUPPLIES 100-300 WATTS 38.10 (1.50) 8:34 am 19.00 (0.75) 29/5/01 89.00 (3.50) TEK 100-300 Series Literature Page 4 SPECIFICATION TEK100 DIAGRAM NOTES: UNLESS OTHERWISE SPECIFIED 1. DIMENSIONS ARE IN MILLIMETRES (INCHES). 2. MATERIAL: ALUMINIUM, 3MM (0.12 INCH) THICK. 3. FINISH: BLACK ANODIZE. 4. MAX MOUNTING SCREW PROTRUSION = 3MM. 5. DRAWING IS NOT TO SCALE. 172.00 (6.77) REF. 162.00 (6.38) M4 (6-32 UNC) 4PL BOTTOM VIEW CHASSIS SINGLE O/P UNIT AC NEUTRAL AC LINE 1MM MIN. CLEARANCE MOLEX INPUT CONNECTOR MATING #09-91-0500 TERMINAL #08-50-0106 (POSITIONS 2 & 4 ARE NOT POPULATED) FRONT VIEW 20.30 (0.80) SIDE VIEW 172.00 (6.77) MULTIPLE O/P UNIT 131.40 (5.17) FAN OUTPUT POWER GOOD MOLEX CONNECTOR MATING #09-91-1000 TERMINAL #08-50-0106 V3 V2 V4V4+ OUTPUT + PINS 8-10 OUTPUT RTN PINS 5-7 REMOTE ON/OFF MULTIPLE OUTPUT MOLEX CONNECTOR MATING #09-91-0800 TERMINAL #08-50-0106 OUTPUT + TERM. 1-4 OUTPUT RETURN TERM. 5-8 FAN OUTPUT POWER GOOD REMT ON/OFF SINGLE OUTPUT M4 (6-32UNC) 4PL (2PL EACH SIDE) AC LINE AC NEUTRAL CHASSIS TOP VIEW 96.50 (3.80) 16.50 (0.65) TEK200 DIAGRAM Design developments may result in specification changes 5.00 (0.20) 63.50 (2.500) LOGIC CONTROL CONNECTORS JST MATE #XHP-2 JST TERM. #SXH-001T-P0.6 8:34 am 38.10 (1.50) 29/5/01 31.70 (1.25) TEK 100-300 Series Literature Page 5 SPECIFICATION SWITCH MODE POWER SUPPLIES 100-300 WATTS TEK 100-300 SERIES COMPONENT HEIGHT 27.8 [1.094] 12.6 [0.496] 108 [4.252] 50.8 [2.000] 63.5 [2.500] B1 P1 VR1 (V ADJ) 203.2 [8.000] 177.8 [7.000] 147.6 [5.811] 177.8 [7.000] TEK300-006 Connect together when Vin is 115V (Without AVS) 115V 230V Connect together when Vin is 230V (Without AVS) L N FG M4X0.7 nut fastener 8 places (For mounting with system) P1 B2 B7 B6 B5 B4 B3 P12 VO- VO+ FAN PG AC-GOOD REMO-SW DC-GOOD 50.8 [2.000] SWITCH MODE POWER SUPPLIES 100-300 WATTS 44.5 [1.752] 115/230-SW T6.3A/250V 8:34 am 108 [4.252] 29/5/01 6.35 [2.500] TEK 100-300 Series Literature Page 6 SPECIFICATION TEK300 DIAGRAM TEK 100-300 SERIES 108 [4.252] 27.8 [1.094] 12.6 [0.496] 203.2 [8.000] 177.8 [7.000] 147.6 [5.811] 177.8 [7.000] TEK300-006 VR1 (V ADJ) FAN B7 B2 B6 B5 B4 B3 P12 P1 V4 V2 V3V3+ RTN V1 PG AC-GOOD DC-GOOD REMO-SW 50.8 [2.000] TEK300 DIAGRAM 63.5 [2.500] Design developments may result in specification changes B1 P1 115/230-SW FG N L Connect together when Vin is 115V (Without AVS) 115V Connect together when Vin is 230V (Without AVS) 230V T6.3A/250V M4X0.7 nut fastener 8 places (For mounting with system) 8:34 am 50.8 [2.000] 29/5/01 44.5 [1.752] TEK 100-300 Series Literature Page 7 SPECIFICATION SWITCH MODE POWER SUPPLIES 100-300 WATTS TEK 100-300 SERIES 6.35 [2.500] 108 [4.252] TEK 100-300 Series Literature 29/5/01 8:34 am Page 8 SPECIFICATION SWITCH MODE POWER SUPPLIES 100-300 WATTS TEK 100-300 SERIES INPUT & OUTPUT MATING CONNECTORS Power Molex Input Connectors Supply Mating Matting Series Conn. Pins TEK100 TEK200 TEK300 Mating Conn. Molex Output Connector Mating Mating Conn. Pins 09-91-0500 08-50-0106 09-9-0900(V1) (V2)09-91-0400(V3) (V4)08-50-0106 09-91-0500 08-50-0106 09-91-0800(single) 09-91-100(Multi) 08-50-0106 09-91-0500 08-50-0106 09-91-1200(single) MULTI 08-50-0106 Fan Drive & AUX. Signals Mating Mating Conn. Pins N/A N/A Chtro Shiunn JS2001-62 JS2001-T The 100-300 Series is now produced by HiTek Power, the worlds leading manufacturer of high and low voltage power supplies. This consolidation of high and low voltage products is aimed at providing our customers with a greater range of power solutions from a single source. HiTek Power, design and manufacture high and low voltage power supplies for such applications as Ion Implantation, Lasers, Photomultipliers and X-ray systems. Please contact HiTek Power sales for further details. UK Durban Road, South Bersted, Bognor Regis West Sussex PO22 9RL UK Tel: +44 (0) 1243 841888 Fax: +44 (0) 1243 820555 e-mail: [email protected] Web Site: www.hitekp.com USA 10221 Buena Vista Avenue Santee, CA 92071, USA Tel: 001 (619) 258 7700 Fax: 001 (619) 258 7733 e-mail: [email protected] GERMANY Gutenbergring 5 63110 Rodgau Germany Tel: 06106 7080-30 Fax: 06106 7080-40 e-mail: [email protected]