ETC AK006L-01

GaAs IC SPST Switch With Integral Driver
Low Loss Reflective DC–6 GHz
AK006L1-01, AK006L1-10
-01
Features
■ Integral Driver ±5 V Supply Voltages
0.220 (5.59 mm)
0.210 (5.33 mm)
■ Low Insertion Loss, Reflective
0.130 (3.30 mm) TYP.
0.063 (1.60 mm) TYP.
■ 7 Lead Hermetic Package
0.130 (3.30 mm) TYP.
■ Capable of Meeting MIL-STD
Requirements8
0.268
(6.81 mm)
0.252
(6.40 mm)
Description
0.45 (1.14 mm) TYP.
The AK006L1-01 is a GaAs IC FET SPST low loss switch
with integral driver. This device is useful as a modulator
and a switch in high reliability and commercial
applications. The integral driver simplifies the external
driver circuit, thus saving PC board space and reducing
component count. The AK006L1-10 is the gullwing version
of this device for surface mount applications.
0.160
(4.06 mm)
0.120
(3.05 mm)
0.031
(0.79 mm)
MAX.
0.013 (0.33 mm)
0.007 (0.18 mm)
0.065
(1.65 mm)
MAX.
0.007 (0.18 mm)
0.003 (0.08 mm)
Electrical Specifications at 25°C
Parameter1
Insertion
Frequency7
Loss2
Min.
Typ.
Max.
Unit
0.4
0.7
1.1
1.7
0.6
0.9
1.3
1.9
dB
dB
dB
dB
DC–1.0 GHz
DC–2.0 GHz
DC–4.0 GHz
DC–6.0 GHz
Isolation
DC–1.0 GHz
DC–2.0 GHz
DC–4.0 GHz
DC–6.0 GHz
VSWR3
DC–1.0 GHz
DC–2.0 GHz
DC–4.0 GHz
DC–6.0 GHz
40
35
30
20
48
40
33
25
dB
dB
dB
dB
1.2:1
1.3:1
1.6:1
1.8:1
1.3:1
1.5:1
1.8:1
2.0:1
Typ.
Max.
Unit
10
20
30
20
40
40
ns
ns
mV
Operating Characteristics at 25°C
Parameter
Switching Characteristics
Condition
Frequency
Min.
Rise, Fall (10/90% or 90/10% RF)
On, Off (50% CTL to 90/10% RF)
Video Feedthru4
Input Power for 1 dB Compression
Intermodulation Intercept Point (IP3)
For Two-tone Input Power 13 dBm
Control Voltages
VLow
VHigh
Supply Voltages5,6
+5 V @ 1 mA Typ.
-5 V @ 4 mA Typ.
1. All measurements made in a 50 Ω system, unless otherwise specified.
2. Insertion loss changes by 0.003 dB/°C.
3. Insertion loss state.
4. Video feedthru measured with 1 ns risetime pulse and 500 MHz bandwidth.
5. Supply voltage must be connected before TTL voltage is applied. To avoid
voltage sequencing refer to the Application Note section, “Driver
Protection Circuit.”
0.5–6 GHz
0.001 GHz
20
12
23
15
dBm
dBm
0.5–6 GHz
0.001 GHz
34
22
37
26
dBm
dBm
0
4
0.5
5.5
V
V
+4.75
-4.75
+5.25
-5.25
V
V
6. Current increases from 4 mA to 5 mA @ 85°C.
7. DC = 300 kHz.
8. See Quality/Reliability section.
Alpha Industries, Inc. [781] 935-5150 • Fax [617] 824-4579 • Email [email protected] • www.alphaind.com
Specifications subject to change without notice. 9/99A
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1
GaAs IC SPST Switch With Integral Driver Low Loss Reflective DC–6 GHz
AK006L1-01, AK006L1-10
2.4
70
2.0
60
Isolation (dB)
Insertion Loss (dB)
Typical Performance Data
1.6
+85˚C
1.2
0.8
50
40
30
-55˚C
0.4
DC
1
2
3
4
5
20
DC
6
1
2
3
4
5
Frequency (GHz)
Frequency (GHz)
Insertion Loss vs. Frequency
Isolation vs. Frequency
Truth Table
6
Absolute Maximum Ratings
TTL
J1–J2
0
Isolation
1
Insertion Loss
Characteristic
Value
RF Input Power (RF In)
0.5 W > 500 MHz
0.1 W @ 50 MHz
Bias Voltage (VB)
+7.0 V, -7.0 V
Control Voltage (VC)
Pin Out
GND
-0.2 V, +7.0 V
Operating Temperature (TOP)
-40°C to +90°C
Storage Temperature (TST)
-65°C to +150°C
Thermal Resistance (ΘJC)
30°C/W
-10
0.345 (8.76 mm)
± 0.010 (0.25 mm)
0.215 (5.46 mm)
J1
J2
0.385 (9.78 mm)
± 0.010 (0.25 mm)
0.080 (2.03 mm)
TYP.
0.045 (1.14 mm)
TYP.
0.268 (6.81 mm)
0.252 (6.40 mm)
0.013 (0.33 mm)
0.007 (0.18 mm)
GND
TTL
+5 V
-5 V
0.063
(1.60 mm)
TYP.
0.007
(0.18 mm)
0.003
(0.08 mm)
2
0.060 (1.52 mm) TYP.
0.130 (3.30 mm) TYP.
0.065 (1.65 mm) MAX.
0.030 (0.76 mm)
0.015 (0.038 mm)
Alpha Industries, Inc. [781] 935-5150 • Fax [617] 824-4579 • Email [email protected] • www.alphaind.com
Specifications subject to change without notice. 9/99A
Powered by ICminer.com Electronic-Library Service CopyRight 2003
0.029
(0.74 mm)
TYP.