ETC AK006M2-10

GaAs IC SPDT Switch With Integral Driver
Non-Reflective DC–6 GHz
AK006M2-01, AK006M2-10
Features
■ Integral Driver ±5 V Supply Voltages
■ Non-Reflective, High Isolation
-01
0.220 (5.59 mm)
0.210 (5.33 mm)
0.130 (3.30 mm) TYP.
0.063 (1.60 mm) TYP.
■ 7 Lead Hermetic Package
0.130 (3.30 mm) TYP.
■ Capable of Meeting MIL-STD
Requirements7
0.268
(6.81 mm)
0.252
(6.40 mm)
Description
0.45 (1.14 mm) TYP.
The AK006M2-01 is a GaAs IC FET SPDT non-reflective
switch with integral driver. These devices are useful in high
reliability and commercial applications. The integral driver
simplifies the external driver circuit, thus saving PC board
space and reducing component count. The AK006M2-10
is the gullwing version of this device for surface mount
applications.
0.160
(4.06 mm)
0.120
(3.05 mm)
0.031
(0.79 mm)
MAX.
0.013 (0.33 mm)
0.007 (0.18 mm)
0.065
(1.65 mm)
MAX.
0.007 (0.18 mm)
0.003 (0.08 mm)
Electrical Specifications at 25°C
Parameter1
Insertion
Frequency6
Loss2
Min.
DC–1.0 GHz
DC–2.0 GHz
DC–4.0 GHz
DC–6.0 GHz
Isolation
DC–1.0 GHz
DC–2.0 GHz
DC–4.0 GHz
DC–6.0 GHz
VSWR (I/O)
DC–1.0 GHz
DC–2.0 GHz
DC–4.0 GHz
DC–6.0 GHz
52
48
37
22
Typ.
Max.
Unit
0.8
1.0
1.2
1.6
0.9
1.1
1.4
1.8
dB
dB
dB
dB
55
50
40
25
dB
dB
dB
dB
1.2:1
1.3:1
1.6:1
1.8:1
1.3:1
1.5:1
1.8:1
2.0:1
Typ.
Max.
Unit
10
20
30
20
40
40
ns
ns
mV
Operating Characteristics at 25°C
Parameter
Switching Characteristics
Condition
Frequency
Min.
Rise, Fall (10/90% or 90/10% RF)
On, Off (50% CTL to 90/10% RF)
Video Feedthru3
Input Power for 1 dB Compression
Intermodulation Intercept Point (IP3)
For Two-tone Input Power 13 dBm
Control Voltages
VLow
VHigh
Supply Voltages4,5
+5 V @ 1 mA Typ.
-5 V @ 4 mA Typ.
1. All measurements made in a 50 Ω system, unless otherwise specified.
2. Insertion loss changes by 0.003 dB/°C.
3. Video feedthru measured with 1 ns risetime pulse and 500 MHz bandwidth.
4. The supply voltage and ground must be connected before TTL voltage is
applied. To avoid voltage sequencing refer to the Application Note section,
“Driver Protection Circuit.”
0.5–6 GHz
0.001 GHz
20
12
23
15
dBm
dBm
0.5–6 GHz
0.001 GHz
34
22
37
26
dBm
dBm
0
4
0.5
5.5
V
V
+4.75
-4.75
+5.25
-5.25
V
V
5. Current increases from 4 mA to 5 mA @ 85°C.
6. DC = 300 kHz.
7. See Quality/Reliability section.
Alpha Industries, Inc. [781] 935-5150 • Fax [617] 824-4579 • Email [email protected] • www.alphaind.com
Specifications subject to change without notice. 9/99A
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1
GaAs IC SPDT Switch With Integral Driver Non-Reflective DC–6 GHz
AK006M2-01, AK006M2-10
2.4
70
2.0
60
1.6
Isolation (dB)
Insertion Loss (dB)
Typical Performance Data
+85˚C
1.2
-55˚C
0.8
50
40
30
0.4
DC
1
2
3
4
5
20
DC
6
1
2
3
4
5
Frequency (GHz)
Frequency (GHz)
Insertion Loss vs. Frequency
Isolation vs. Frequency
Truth Table
6
Absolute Maximum Ratings
TTL
J1–J2
J1–J3
1
Insertion Loss
Isolation
0
Isolation
Insertion Loss
Characteristic
Value
RF Input Power (RF In)
Pin Out
J1
0.5 W > 500 MHz
0.1 W @ 50 MHz
Bias Voltage (VB)
+7.0 V, -7.0 V
Control Voltage (VC)
-0.2 V, +7.0 V
Operating Temperature (TOP)
-40°C to +90°C
Storage Temperature (TST)
-65°C to +150°C
Thermal Resistance (ΘJC)
30°C/W
-10
0.345 (8.76 mm)
± 0.010 (0.25 mm)
50 Ω
0.215 (5.46 mm)
50 Ω
J3
J2
0.385 (9.78 mm)
± 0.010 (0.25 mm)
0.080 (2.03 mm)
TYP.
0.045 (1.14 mm)
TYP.
0.268 (6.81 mm)
0.252 (6.40 mm)
0.013 (0.33 mm)
0.007 (0.18 mm)
GND
+5 V
TTL
-5 V
0.063
(1.60 mm)
TYP.
0.007
(0.18 mm)
0.003
(0.08 mm)
2
0.060 (1.52 mm) TYP.
0.130 (3.30 mm) TYP.
0.065 (1.65 mm) MAX.
0.030 (0.76 mm)
0.015 (0.038 mm)
Alpha Industries, Inc. [781] 935-5150 • Fax [617] 824-4579 • Email [email protected] • www.alphaind.com
Specifications subject to change without notice. 9/99A
Powered by ICminer.com Electronic-Library Service CopyRight 2003
0.029
(0.74 mm)
TYP.