LMH0002 SMPTE 292M / 259M Serial Digital Cable Driver General Description Features The LMH0002 SMPTE 292M / 259M serial digital cable driver is a monolithic, high-speed cable driver designed for use in SMPTE 292M / 259M serial digital video and ITU-T G.703 serial digital data transmission applications. The LMH0002 drives 75Ω transmission lines (Belden 8281, Belden 1694A or equivalent) at data rates up to 1.485 Gbps. n SMPTE 292M, SMPTE 344M and SMPTE 259M compliant n Data rates to 1.485 Gbps n Differential input n 75Ω differential output n Selectable slew rate n Adjustable output amplitude n Single 3.3V supply operation n Operating temperature range: Commercial 0˚C to +70˚C (LMH0002MA) or Industrial −40˚C to +85˚C (LMH0002TMA) n Typical power consumption: 125mW in SD mode and 149mW in HD mode n Replaces the GS1528 and GS1528A The LMH0002 provides two selectable slew rates for SMPTE 259M and SMPTE 292M compliance. The output voltage swing is adjustable via a single external resistor. The LMH0002 is powered from a single 3.3V supply. Power consumption is typically 125mW in SD mode and 149mW in HD mode. Applications n SMPTE 292M, SMPTE 344M, and SMPTE 259M serial digital interfaces n Sonet/SDH and ATM interfaces n Digital routers and switches n Distribution amplifiers n Buffer applications n Set top boxes n Security cameras Typical Application 20176102 © 2006 National Semiconductor Corporation DS201761 www.national.com LMH0002 SMPTE 292M / 259M Serial Digital Cable Driver January 2006 LMH0002 Absolute Maximum Ratings (Note 1) Supply Voltage: Input Voltage (all inputs) −0.3V to VCC+0.3V −65˚C to +150˚C +150˚C Lead Temperature (Soldering 4 Sec) 3.3V ± 5% Supply Voltage (VCC – VEE): Operating Free Air Temperature (TA) LMH0002MA LMH0002TMA +260˚C Package Thermal Resistance θJA 8-pin SOIC θJC 8-pin SOIC 250V Recommended Operating Conditions 28mA Junction Temperature 5kV ESD Rating (MM) −0.5V to 3.6V Output Current Storage Temperature Range ESD Rating (HBM) 0˚C to +70˚C −40˚C to +85˚C +125˚C/W +105˚C/W DC Electrical Characteristics Over Supply Voltage and Operating Temperature ranges, unless otherwise specified (Notes 2, 3). Symbol Parameter VCMIN Input Common Mode Voltage VSDI Input Voltage Swing Conditions Reference SDI, SDI Differential VCMOUT Output Common Mode Voltage VSDO Output Voltage Swing SD/HD Input Voltage Max Units 1.6 + VSDI/2 Min VCC – VSDI/2 V 100 2000 mVP−P SDO, SDO Typ VCC – VSDO Single-ended, 75Ω load, RREF = 750Ω 1% 750 800 850 mVP-P Single-ended, 75Ω load, RREF = 590Ω 1% 900 1000 1100 mVP-P Min for SD SD/HD 2.4 V Max for HD 0.8 SD/HD Input Current ICC Supply Current V 3.7 V µA SD/HD = 0, (Note 5) 45 49 mA SD/HD = 1, (Note 5) 38 43 mA Max Units 1485 Mbps AC Electrical Characteristics Over Supply Voltage and Operating Temperature ranges, unless otherwise specified (Note 3). Symbol Parameter Conditions Reference DRSDI Input Data Rate (Note 4) SDI, SDI tjit Additive Jitter 1.485 Gbps SDO, SDO tr,tf Output Rise Time, Fall Time Mismatch in Rise/Fall Time (Note 4) tOS Output Overshoot (Note 4) RLSDO Output Return Loss (Note 7) Min Typ 26 psP-P 270 Mbps 18 psP-P SD/HD = 0, 20% – 80%, (Note 6) 120 220 560 800 ps 30 ps SD/HD = 1, 20% – 80% 400 8 15 20 ps % dB Note 1: "Absolute Maximum Ratings" are those parameter values beyond which the life and operation of the device cannot be guaranteed. The stating herein of these maximums shall not be construed to imply that the device can or should be operated at or beyond these values. The table of "Electrical Characteristics" specifies acceptable device operating conditions. Note 2: Current flow into device pins is defined as positive. Current flow out of device pins is defined as negative. All voltages are stated referenced to VEE = 0 Volts. Note 3: Typical values are stated for VCC = +3.3V and TA = +25˚C. Note 4: Specification is guaranteed by characterization. Note 5: Maximum ICC is measured at VCC = +3.465V and TA = +70˚C. Note 6: Specification is guaranteed by characterization and verified by test. Note 7: Output return loss is dependent on board design. The LMH0002 meets this specification on the SD002 evaluation board from 5MHz to 1.5GHz. www.national.com 2 LMH0002 Connection Diagram 20176101 8-Pin SOIC Order Number LMH0002MA or LMH0002TMA See NS Package Number M08A Pin Descriptions Pin # Name Description 1 SDI Serial data true input. 2 SDI Serial data complement input. 3 VEE Negative power supply (ground). 4 RREF Output driver level control. Connect a resistor to VCC to set output voltage swing. 5 VCC Positive power supply (+3.3V). 6 SD/HD Output slew rate control. Output rise/fall time complies with SMPTE 292M when low and SMPTE 259M when high. 7 SDO Serial data complement output. 8 SDO Serial data true output. Device Operation INPUT INTERFACING The LMH0002 accepts either differential or single-ended input. The inputs are self-biased, allowing for simple AC or DC coupling. DC-coupled inputs must be kept within the specified common-mode range. SDI and SDI are self-biased at approximately 2.1V with VCC = 3.3V. Figure 1 shows the differential input stage for SDI and SDI. 20176104 FIGURE 1. Differential Input Stage for SDI and SDI. 3 www.national.com LMH0002 Device Operation OUTPUT SLEW RATE CONTROL (Continued) The LMH0002 output rise and fall times are selectable for either SMPTE 259M or SMPTE 292M compliance via pin 6, SD/HD. For slower rise and fall times, or SMPTE 259M compliance, SD/HD is set high. For faster rise and fall times, or SMPTE 292M compliance, SD/HD is set low. OUTPUT INTERFACING The LMH0002 uses current mode outputs. Single-ended output levels are 800 mVP-P into 75Ω AC-coupled coaxial cable (with RREF = 750Ω). Output level is controlled by the value of the RREF resistor connected between pin 4 and VCC. The RREF resistor should be placed as close as possible to the RREF pin. In addition, the copper in the plane layers below the RREF network should be removed to minimize parasitic capacitance. www.national.com REPLACING THE GENNUM GS1528 The LMH0002 is form-fit-function compatible with the Gennum GS1528 and GS1528A. 4 LMH0002 SMPTE 292M / 259M Serial Digital Cable Driver Physical Dimensions inches (millimeters) unless otherwise noted 8-Pin SOIC Order Number LMH0002MA or LMH0002TMA NS Package Number M08A National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. For the most current product information visit us at www.national.com. LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. BANNED SUBSTANCE COMPLIANCE National Semiconductor manufactures products and uses packing materials that meet the provisions of the Customer Products Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain no ‘‘Banned Substances’’ as defined in CSP-9-111S2. Leadfree products are RoHS compliant. National Semiconductor Americas Customer Support Center Email: [email protected] Tel: 1-800-272-9959 www.national.com National Semiconductor Europe Customer Support Center Fax: +49 (0) 180-530 85 86 Email: [email protected] Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Français Tel: +33 (0) 1 41 91 8790 National Semiconductor Asia Pacific Customer Support Center Email: [email protected] National Semiconductor Japan Customer Support Center Fax: 81-3-5639-7507 Email: [email protected] Tel: 81-3-5639-7560