MUR1620CTR Preferred Device SWITCHMODE Dual Ultrafast Power Rectifier . . . designed for use in negative switching power supplies, inverters and as free wheeling diodes. Also, used in conjunction with common cathode dual Ultrafast Rectifiers, makes a single phase full–wave bridge. These state–of–the–art devices have the following features: • • • • • • • • http://onsemi.com Common Anode Dual Rectifier (8.0 A per Leg or 16 A per Package) Ultrafast 35 Nanosecond Reverse Recovery Times Exhibits Soft Recovery Characteristics High Temperature Glass Passivated Junction Low Leakage Specified @ 150°C Case Temperature Current Derating @ Both Case and Ambient Temperatures Epoxy Meets UL94, VO @ 1/8″ Complement to MUR1620CT Common Cathode Device ULTRAFAST RECTIFIER 16 AMPERES 200 VOLTS 1 2, 4 3 Mechanical Characteristics: • Case: Epoxy, Molded • Weight: 1.9 grams (approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal • • • 4 Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds Shipped 50 units per plastic tube Marking: U1620R 1 MAXIMUM RATINGS (Per Leg) 2 3 Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 200 V TO–220AB CASE 221A STYLE 7 Average Rectified Forward Voltage (Rated VR, TC = 160°C) Per Leg Per Total Device IF(AV) A MARKING DIAGRAM Peak Repetitive Surge Current (Rated VR, Square Wave, Per Diode 20 kHz, TC = 140°C) IFM Non–Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) IFSM Rating Operating Junction and Storage Temperature Range 8.0 16 16 A U1620R 100 A U1620R = Device Code TJ, Tstg °C –65 to +175 ORDERING INFORMATION Device MUR1620CTR Package Shipping TO–220 50 Units/Rail Preferred devices are recommended choices for future use and best overall value. Semiconductor Components Industries, LLC, 2000 October, 2000 – Rev. 2 1 Publication Order Number: MUR1620CTR/D MUR1620CTR THERMAL CHARACTERISTICS (Per Leg) Rating Thermal Resistance — Junction to Case Symbol Value Unit RθJC 2.0 °C/W ELECTRICAL CHARACTERISTICS (Per Leg) Maximum Instantaneous Forward Voltage (Note 1.) (iF = 8.0 Amps, TC = 25°C) (iF = 8.0 Amps, TC = 150°C) vF Maximum Instantaneous Reverse Current (Note 1.) (Rated dc Voltage, TC = 25°C) (Rated dc Voltage, TC = 150°C) iR Maximum Reverse Recovery Time (IF = 1.0 Amp, di/dt = 50 Amps/µs) (IF = 0.5 Amp, di/dt = 100 Amps/µs) trr Volts 1.2 1.1 µA 5.0 500 ns 85 35 1. Pulse Test: Pulse Width = 5.0 ms, Duty Cycle ≤ 10%. 100 1000 500 200 100 50 20 10 5 2 1 0.5 0.2 0.1 0.05 0.02 0.01 50 30 20 10 7.0 TJ = 175°C 150°C 100°C * The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 25°C 0 5.0 40 60 80 100 120 140 160 180 200 Figure 2. Typical Reverse Current* (Per Leg) 150°C 3.0 100°C 2.0 25°C 1.0 0.7 0.5 0.3 0.2 0.1 20 VR, REVERSE VOLTAGE (VOLTS) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) TJ = 175°C IR, REVERSE CURRENT ( A) 70 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 16 14 RATED VR APPLIED 12 RJC = 2°C/W 10 8.0 dc SQUARE WAVE 6.0 4.0 2.0 0 140 150 160 170 vF, INSTANTANEOUS VOLTAGE (VOLTS) TC, CASE TEMPERATURE (°C) Figure 1. Typical Forward Voltage (Per Leg) Figure 3. Current Derating, Case (Per Leg) http://onsemi.com 2 180 14 PF(AV) , AVERAGE POWER DISSIPATION (WATTS) 16 RJA = 16°C/W 12 dc 10 8.0 SQUARE WAVE 6.0 4.0 2.0 0 0 25 50 75 100 125 150 175 200 16 TJ = 175°C 14 12 SQUARE WAVE 10 8.0 dc 6.0 4.0 2.0 0 2.0 0 6.0 4.0 8.0 10 14 12 TA, AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 4. Current Derating, Ambient (Per Leg) Figure 5. Power Dissipation (Per Leg) 16 1.0 D = 0.5 0.5 0.2 0.1 0.1 0.05 0.01 t1 SINGLE PULSE 0.02 0.01 0.01 ZθJC(t) = r(t) RθJC P(pk) 0.05 D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT T1 t2 TJ(pk) - TC = P(pk) ZθJC(t) DUTY CYCLE, D = t1/t2 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 t, TIME (ms) Figure 6. Thermal Response 1000 900 800 700 C, CAPACITANCE (pF) r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) MUR1620CTR 600 500 400 300 200 100 0 0.1 0.2 0.3 0.5 0.7 1.0 0.2 0.3 0.5 0.7 10 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Typical Capacitance (Per Leg) http://onsemi.com 3 20 30 50 70 100 500 1000 MUR1620CTR PACKAGE DIMENSIONS TO–220 THREE–LEAD TO–220AB CASE 221A–09 ISSUE AA –T– B SEATING PLANE C F T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q 1 2 3 U H K Z L R V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. J G D N INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.018 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ----0.080 STYLE 7: PIN 1. 2. 3. 4. MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.46 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ----2.04 CATHODE ANODE CATHODE ANODE SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada Email: [email protected] Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada N. American Technical Support: 800–282–9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor – European Support German Phone: (+1) 303–308–7140 (Mon–Fri 2:30pm to 7:00pm CET) Email: ONlit–[email protected] French Phone: (+1) 303–308–7141 (Mon–Fri 2:00pm to 7:00pm CET) Email: ONlit–[email protected] English Phone: (+1) 303–308–7142 (Mon–Fri 12:00pm to 5:00pm GMT) Email: [email protected] CENTRAL/SOUTH AMERICA: Spanish Phone: 303–308–7143 (Mon–Fri 8:00am to 5:00pm MST) Email: ONlit–[email protected] Toll–Free from Mexico: Dial 01–800–288–2872 for Access – then Dial 866–297–9322 ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support Phone: 303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001–800–4422–3781 Email: ONlit–[email protected] JAPAN: ON Semiconductor, Japan Customer Focus Center 4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031 Phone: 81–3–5740–2700 Email: [email protected] ON Semiconductor Website: http://onsemi.com EUROPEAN TOLL–FREE ACCESS*: 00–800–4422–3781 *Available from Germany, France, Italy, UK, Ireland For additional information, please contact your local Sales Representative. http://onsemi.com 4 MUR1620CTR/D