WIRE-WOUND RF CHIP INDUCTORS The 0402 to 1210 series range of Miniature Chip Inductors contains the very latest in wire-wound technology and Ceramic or Ferrite Core, thus providing the ultimate in performance demanded by today's Wireless products. The Inductors provide high Q and SRFs in an industry standard size and footprint. TABLE of CONTENTS Part Number Legend & Design Kits Available . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Performance Specifications Environmental Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Mechanical Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5 Tape and Reel Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Miniature Wire-wound RF Chip Inductors 0402CD Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-7 0603CD Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9 0805CD Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11 0805CM Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-13 0805FT Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14-15 1008CD Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-17 1008CM Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-19 1008CQ Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20-21 1008FD Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22-23 1210FT Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-25 1206CD Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26-27 Application Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28-31 US 858 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com 1 WC701.D (12/02) WIRE-WOUND RF CHIP INDUCTORS Part Number Legend PE — 0805 C D PACKAGE STYLE (0402, 0603, 0805, 1008, 1210 or 1206) CORE MATERIAL C = Ceramic (Alumina) CD = Standard Range CM = High Performance CQ = High Q F = Ferrite 121 K T T INDUCTANCE (nH) 1st 2 digits are significant. 3rd digit is multiplier. TOLERANCE F = ±1% G = ±2% J = ±5% K = ±10% M = ±20% TERMINATION T = AgPd/Tin-Lead PACKAGING T = Tape & Reel (7" reel/8 mm wide tape/4 mm pitch) Qty./reel Size 0402 3000 pieces 0603 2000 pieces 0805 2000 pieces 1008 1600 pieces 1210 2000 pieces 1206 2000 pieces Design Kits Available from Pulse Product KIT Series 0402CD Series 0603CD Series 0805CD Series 0805FT Series 1008CD Series 1008FD Series 1210FT Series 1206CD Series Kit Part Number PE-0402CDKIT-T PE-0603CDKIT-T PE-0805CDKIT-T PE-0805FTKIT-T PE-1008CDKIT-T PE-1008FDKIT-T PE-1210FTKIT-T PE-1206CDKIT-T Tolerance 5% 2% 2% 5% 2% 5% 5% 5% NOTE: 0805CM, 1008CM and 1008CQ design kits are not available at this time. US 858 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com WC701.D (12/02) 2 WIRE-WOUND RF CHIP INDUCTORS Selection Guides Electrical Specifications Part Number Size Construction Inductance (nH) 0402CD 0402 Wirewound 1.0 to 120 0603CD 0603 Wirewound 1.8 to 390 0805CD 0805 Wirewound 3.3 to 1500 0805CM 0805 Wirewound 3.3 to 680 0805FT 0805 Wirewound 1000 to 68000 1008CD 1008 Wirewound 4.7 to 5600 1008CM 1008 Wirewound 4.7 to 4700 1008CQ 1008 Wirewound 3.0 to 220 1008FD 1008 Wirewound 150 to 10000 1210FT 1210 Wirewound 10 to 12000 1206CD 1206 Wirewound 3.3 to 1200 1nH 10nH 100nH 1µH 10µH 33µH CD Series: Standard 100% compatible with other market leaders. CM Series: Offers improved electrical performance to Pulse CD series. CQ Series: Offers high Q and high Idc series. Competition Cross Reference Type Competition 0402CD Coilcraft Wire Wound 0402CS 0603CD 0805CD 0603CS 0805CS/ HS/HT Pulse Wire-wound Inductors 0805FT 1008CQ 1008CD 1008HQ 1008CS/ HT/CT Murata LQW1608A LQN21A Taiyo Yuden LB2012T LEM_2520T TDK NL2016 NLH2520 1008FD 1210FT 1206CD 1008LS 1206CS NL3225 US 858 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com 3 WC701.D (12/02) WIRE-WOUND RF CHIP INDUCTORS Performance Specifications Environmental Testing Storage and Operating Temperature Range: Inductors are subjected to the extremes for 48 hours. -40 to +125°C Then tested at 25°C Thermal Shock: Inductors are subjected to 30 cycles for 30 minutes at each extreme. -40 to +85°C Moisture Resistance There shall be no deformation or change in appearance Inductance shall not change by more than ±5% Then tested at 25°C Q values shall not change by more than ±10% Inductors are subjected to 10 cycles of 24 hours at 70°C with 90 to 95% Relative Humidity Then tested at 25°C Inductors are subjected to 1000 hours at 85°C with 85% Relative Humidity with the rated current applied Operating Life There shall be no Damaged, Open or Shorted Windings Mechanical Testing There shall be no deformation or change in appearance Inductors are subjected to the following: Use a solder pot at 260°C, with RMA Flux. Each termination is immersed in 63Sn/37Pb molten solder for 4 to 6 seconds. Temperature Range: Inductance shall not change by more than ±5% Q values shall not change by more than ±10% 300 Recommended Solder Heat Resistance Profile 275 T 250 E M 225 P 200 E 183 175 R 150 A T 125 U 100 R 75 E 50 C° 235° peak temperature 15 sec. min to 20 sec. max 25 0 0 25 50 75 100 125 150 175 60 seconds minimum 200 225 250 275 300 325 350 375 400 90 seconds (-0, +10) 330 seconds maximum US 858 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com WC701.D (12/02) 4 WIRE-WOUND RF CHIP INDUCTORS Performance Specifications Mechanical Testing Vibration (Random) Samplers are subjected to random vibration as per NAVMAT P9492 There shall be no deformation or change in appearance Mechanical Shock Inductors are subjected to one half sine wave pulse (8700 g's for 0.3 ms) in each directional axis for a total of 18 shocks Inductance shall not change by more than ±5% Q values shall not change by more than ±10% Moisture Resistance Reflow Inductors on to test pads using 63 Sn/37 Pb solder paste (IR Reflow profile = 200°C for 30 seconds or peak 235°C for 20 seconds) The inductors shall withstand a minimum force of 1000 g's in any direction using a dynamometer force guage. Tape and Reel Specifications A D P1 P2 P3 H C W T B E Packaging Specifications Series 0402CD 0603CD 0805CD 0805CM 0805FT 1008CD 1008CM 1008CQ 1008FD 1210FT 1206CD Parts per Reel 3000 2000 2000 2000 2000 1600 1600 1600 2000 2000 2000 A 178 178 178 178 178 178 178 178 178 330 178 Reel Dimensions (mm) B C D 50 13 14.4 50 13 14.4 50 13 14.4 50 13 14.4 50 13 14.4 50 13 14.4 50 13 14.4 50 13 14.4 50 13 14.4 50 13 18.4 50 13 14.4 E 8.4 8.4 8.4 8.4 8.4 8.4 8.4 8.4 8.4 14.4 8.4 W 8 8 8 8 8 8 8 8 8 12 8 Tape Dimensions (mm) P1 P2 P3 H 2 4 4 1.1 2 4 4 1.7 2 4 4 2.1 2 4 4 2.1 2 4 4 2.1 2 4 4 2.6 2 4 4 2.6 2 4 4 2.6 2 4 4 2.6 8 4 2 4.0 2 4 4 2.1 T 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 NOTE: P1, P2 and P3 are same for all chip inductor series. Keeping the same dimensions for guide hole and pocket pitch (P1), pocket pitch (P2), guide hole pitch (P3) and tape width (8mm) for all series, enables the packaging machine to maintain the same settings while changing models. The only difference between the series are the parts per reel which contribute to a different length of tapes/reel per model. US 858 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com 5 WC701.D (12/02)