MATERIAL SAFETY DATA SHEET CHEMTRONICS CW3300 CIRCUITWORKS OVERCOAT PEN 1. IDENTIFICATION OF SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING COMMERCIAL PRODUCT NAME: CODE NO. CIRCUITWORKS OVERCOAT PEN CW3300C CW3300G CW3300BLKC CW3300BLKG MANUFACTURER/SUPPLIER: CHEMTRONICS, INC. 8125 Cobb Center Drive Kennesaw, Georgia 30152 USA Phone Number: 1-770-424-4888 Fax Number: 1-770-423-0748 EMERGENCY: 1-703-527-3887 2. COMPOSITION/INFORMATION ON INGREDIENTS HAZARDOUS INGREDIENTS CAS No. CLASSIFICATION R PHRASES CONCENTRATION Propylene Glycol Methyl Ether Acetate 108-65-6 Xi R10, R36 5.0-15.0 1-Methyl Propanol 78-92-2 Xn R10,R20 3.0-10.0 Butyl Acetate 123-86-4 R10 5.0-15.0 Toluene 108-88-3 F, Xn R11, R20 30.0-60.0 3. HAZARDS IDENTIFICATION Main Hazards Highly Flammable. Health Effects - Eyes Liquid may cause acute eye irritation, stinging and swelling. Health Effects - Skin Repeated or prolonged contact may produce defatting of the skin leading to irritation and dermatitis. Health Effects - Ingestion Swallowing may have the following effects: dizziness, light headedness, drowsiness , nausea. Health Effects - Inhalation Exposure to vapour at high concentrations may have the following effects: drowsiness, unconsciousness. 4. FIRST-AID MEASURES First Aid - Eyes Immediately flood the eye with plenty of water for at least 15 minutes, holding the eye open. Obtain medical attention if soreness or redness persists. First Aid - Skin Wash skin with soap and water. Apply a reconditioning skin cream. First Aid - Ingestion Give two or more glasses of water. Do not induce vomiting. Obtain medical attention. First Aid - Inhalation Remove from exposure. Seek medical attention if you feel unwell. MATERIAL SAFETY DATA SHEET CHEMTRONICS CW3300 CIRCUITWORKS OVERCOAT PEN 5. FIRE-FIGHTING MEASURES Extinguishing Media Use foam, dry chemical or carbon dioxide. Unsuitable Extinguishing Media: Do not use waterjet. Special Hazards of Product: This product may give rise to hazardous fumes in a fire. MATERIAL SAFETY DATA SHEET NO. 0067E PAGE 1 OF 4 Protective Equipment for Fire-Fighting: 6. ACCIDENTAL RELEASE MEASURES Personal Precautions: Wear self contained breathing apparatus. Ventilate the area. Wear appropriate protective clothing. Environmental Precautions: Try to prevent the material from entering drains or water courses. Spillages: Contain and absorb using earth, sand or other inert material. 7. HANDLING AND STORAGE Handling: Use in well ventilated area. Storage: Storage area should be: out of direct sunlight, away from sparks and flames. Storage temperature should be kept below 50°C. 8. EXPOSURE CONTROLS /PERSONAL PROTECTION Engineering Control Measures Exposure to this material may be controlled in a number of ways. The measures appropriate for a particular worksite depend on how the material is used and on the potential for exposure. Use of the basic principles of Industrial Hygiene will enable this material to be used safely. Respiratory Protection General ventilation should be sufficient. Hand Protection: Use a good quality barrier cream. Eye Protection: Chemical goggles if there is a risk of eye contact. Body Protection: 9. PHYSICAL AND CHEMICAL PROPERTIES Physical State: Normal work wear. Colour: clear or green Odour: mild hydrocarbon Boiling Range/Point (°C): 111-140 Paste Explosion Limits (%): Lower/Upper1.2/10.0 Solubility in water (kg/m3): Appreciable Vapour Pressure (mm.Hg./20°C) 22-30 Density (kg/m3) 0.9 MATERIAL SAFETY DATA SHEET CHEMTRONICS CW3300 CIRCUITWORKS OVERCOAT PEN 9. PHYSICAL AND CHEMICAL PROPERTIES continued Vapour Density (Air=1): >1 Evaporation Rate: 10. STABILITY AND REACTIVITY Stability: >1 Conditions to Avoid: Sources of ignition. Temperatures in excess of 50°C. Materials to avoid: Strong oxidizing agents, acids, bases, caustics. Hazardous Decomposition Products: Combustion will generate: oxides of carbon, oxides of nitrogen, monomers and smoke. Stable under normal conditions. 11. TOXICOLOGICAL INFORMATION MATERIAL SAFETY DATA SHEET NO. 0067E PAGE 2 OF 4 Acute Toxicity Low order of acute toxicity. 12. ECOLOGICAL INFORMATION Mobility: No product specific data is available. Persistence/Degradability: No product specific data is available. Bio-accumulation: 13. DISPOSAL CONSIDERATIONS No product specific data is available. Container Disposal: Plastic caps and empty containers may be recycled via appropriate routes. Do not incinerate closed containers. 14. TRANSPORTATION INFORMATION UN Number: UN Proper Shipping Name: UN Class UN Packaging Group ADR/RID Substance Identification Number ADR/RID - Description ADR/RID - Class ADR/RID - Item No. ADR/RID - Hazard Identification Number IMDG - Proper Shipping Name IMDG - Packaging Group IMDG - Class IMDG - Marine Pollutant IMDG - Ems Number IMDG - Page Number IATA - Proper Shipping Name IATA - Packaging Group IATA - Class Tremcard No. TEC(R) 1263 PAINT 3 II 1263 Inflammable liquids having a flash-point below 21°C, not toxic and not corrosive. 3 3b 33 PAINT II 3.2 No. 3-07 3268 PAINT II 3 527 MATERIAL SAFETY DATA SHEET CHEMTRONICS CW3300 CIRCUITWORKS OVERCOAT PEN 15. REGULATORY INFORMATION Labeling Information F, Xn Highly Flammable. Harmful. R Phrases: Highly Flammable. Harmful by inhalation. S Phrases: Keep away from sorces of ignition - No Smoking. Keep away from children. Do not breathe vapour/spray. Avoid contact with eyes. 16. OTHER INFORMATION: PRODUCT INFORMATION: 1-770-424-4888 Product Use: MSDS first issued: MSDS data revised: For industrial use only. 5/31/96 3/17/98 EC Legislation EC Directive 91/155/EEC defining the laying down and detailed arrangements for the system of specific information relating to dangerous preparations. EC Directive 88/379/EEC relating to the classification, packaging and labelling of dangerous preparations. MATERIAL SAFETY DATA SHEET NO. 0067E PAGE 3 OF 4 To the best of our knowledge, the information contained herein is accurate. However, all materials may present unknown hazards and should be used with caution. In particular, improper use of our products and their inappropriate combination with other products and substances may produce harmful results which cannot be anticipated. Final determination of the suitability of any material is the sole responsibility of the user. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that may exist. MATERIAL SAFETY DATA SHEET NO. 0067E PAGE 4 OF 4