Super ‘X’ In-line 3/2, 5/2 and 5/3 Spool Valves Manually and Mechanically Actuated G1/8 and G1/4 ● Wide range of operators ● Suitable for multi-directional flow and dual supply applications ● High flow capacity ● Lightweight corrosion resistant materials Technical Data Medium: Compressed air, filtered, lubricated and non-lubricated Operation: Spool Valve, directly and indirectly actuated Mounting: Through-holes in valve body Port Size: G1/8 & G1/4 Operating Pressure: Maximum 10 bar. For details see overleaf Flow Characterstics: Size Function ‘C’ ‘b’ ‘A’ l/min Cv Kv G1/8 3/2,5/2 & 5/3 1,4 0,441 5,5 335 0,34 0,295 G1/4 3/2,5/2 & 5/3 4,0 0,434 16 965 0,98 0,351 Operating Temperature: 0°C* to +70°C Ordering Information To order, quote number from tables overleaf, e.g. 03 0402 02 for a Roller Actuated, Spring Return Model. * Consult our Technical Service for use below +2°C. Materials: Diecast aluminium alloy body, aluminium end cover, nitrile rubber seals 3/2 Normally closed 3/2 Normally open 5/2 5/3 All ports blocked mid position 5/3 Centre open exhaust mid position For Technical Data on Super X Solenoid and Pilot Valves see section 5.4.151 6/96 Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. N/** 5.6.081.01 Super ‘X’ General Information G1/8 3/2 Mechanical Valves Symbol Model Operator Return Operating Pressure (bar) Weight (kg) Spares kit Page no. 03 0400 02 Plunger Spring 2 - 10 0,140 03 8408 02 8 03 0417 02 Plunger Pilot 2 - 10 0,200 03 8408 02 8 03 0402 02 03 0411 02 03 0293 02 Roller Roller Lever Roller Lever (Heavy Duty) Spring Spring Spring 2 - 10 2 - 10 2 - 10 0,140 0,210 0,210 03 8408 02 03 8408 02 03 8408 02 8 8 9 03 0423 02 Sensitve Roller Lever Spring 2 - 10 0,250 N/A 9 03 0409 02 Roller Pilot 2 - 10 0,180 03 8408 02 9 03 0427 02 Roller Lever Pilot 2 - 10 0,250 03 8408 02 9 03 0410 02 One-way Trip Spring 2 - 10 0,210 03 8408 02 10 03 0294 02 0ne-way trip (Heavy Duty) Spring 2 - 10 0,210 03 8408 02 10 03 0432 02 Antenna Spring 2 - 10 0,210 N/A 10 Model Operator Return Operating Pressure (bar) Weight (kg) Spares kit Page no. X3 0440 02 Plunger Spring 2 - 10 0,250 03 8408 02 11 X3 0457 02 Plunger Pilot 2 - 10 0,310 03 8408 02 11 X3 0442 02 X3 0451 02 X3 0393 02 Roller Roller Lever Roller Lever (Heavy Duty) Spring Spring Spring 2 - 10 2 - 10 2 - 10 0,250 0,320 0,290 03 8408 02 03 8408 02 03 8408 02 11 11 12 X3 0463 02 Sensitive Roller Lever Spring 2 - 10 0,360 N/A 12 X3 0449 02 Roller Pilot 2 - 10 0,290 03 8408 02 12 5 1 3 X3 0467 02 Roller Lever Pilot 2 - 10 0,360 03 8408 02 12 4 X3 0450 02 One-way Trip Spring 2 - 10 0,320 03 8408 02 13 X3 0394 02 One Way Trip (Heavy Duty) Spring 2 - 10 0,290 03 8408 02 13 X3 0472 02 Antenna Spring 2 - 10 0,300 N/A 13 Model Operator Return Operating Pressure (bar) Weight (kg) Spares kit Page no. 03 0600 02 Plunger Spring 2 - 10 0,340 03 8602 02 14 03 0602 02 Roller Spring 2 - 10 0,340 03 8602 02 14 03 0611 02 Roller Lever Spring 2 - 10 0,410 03 8602 02 14 03 0609 02 Roller Pilot 2 - 10 0,390 03 8612 02 14 03 0624 02 Roller Lever Pilot 2 - 10 0,450 03 8612 02 15 2 10 12 1 3 2 12 10 1 3 2 12 10 1 3 2 14 10 1 3 2 12 10 1 3 2 10 12 1 3 2 12 3 10 1 G1/8 5/2 Mechanical Valves Symbol 12 4 2 10 5 1 3 14 4 2 12 5 1 3 14 4 2 12 5 1 3 4 14 2 12 5 1 3 14 14 4 2 12 2 12 5 1 3 4 14 2 12 5 1 3 G1/4 3/2 Mechanical Valves Symbol 2 10 12 1 3 2 12 10 1 3 2 12 3 10 1 N/** 5.6.081.02 Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 6/96 General Information Super ‘X’ G1/4 5/2 Mechanical Valves Symbol 12 Model Operator Return Operating Pressure (bar) Weight (kg) Spares kit Page no. X3 0640 02 Plunger Spring 2 - 10 0,460 03 8602 02 16 X3 0642 02 Roller Spring 2 - 10 0,460 03 8602 02 16 5 1 3 X3 0651 02 Roller Lever Spring 2 - 10 0,530 03 8602 02 16 4 X3 0649 02 Roller Pilot 2 - 10 0,500 03 8612 02 16 X3 0664 02 Roller Lever Pilot 2 - 10 0,570 03 8612 02 17 4 2 10 5 1 3 14 14 4 2 12 2 12 5 1 3 G1/8 3/2 Manual Valves Symbol 12 2 1 3 12 10 2 10 1 3 12 2 3 12 10 1 2 1 3 12 10 2 12 3 12 Return Operating Pressure (bar) Weight (kg) Spares kit Page no. 03 0404 02 03 0405 02 03 0406 02 03 0366 02 03 0367 02 03 0368 02 03 0414 02 03 0415 02 03 0416 02 03 0408 02 03 0420 02 03 0421 02 Black Green Red Red Green Black Black Green Red Black Green Red Button (Palm) Spring 2 - 10 0,150 03 8408 02 18 Button, (Palm) Spring 2 - 10 0,290 03 8408 02 18 Button, (Shrouded) Spring 2 - 10 0,210 03 8408 02 18 Button (Palm) Pilot 2 - 10 0,220 03 8408 02 18 03 0428 02 03 0297 02 Red Emergency Stop Twist Ring 2 - 10 0,310 03 8473 02 19 Red Emergency Stop Rotary Knob 2 - 10 0,276 03 8408 02 19 03 0335 02 Red Button, Palm Key 2 - 10 0,370 03 8408 02 19 03 0438 02 Black Lever Spring 2 - 10 0,280 03 8408 02 20 1 03 0426 02 Black Lever Spring 2 - 10 0,240 03 8408 02 20 2 10 03 0403 02 03 0437 02 03 0296 02 Black Black Black Lever Lever Lever Lever Lever Lever 2 - 10 2 - 10 2 - 10 0,160 0,290 0,250 03 8408 02 03 8408 02 03 8048 02 20 20 19 03 0425 02 Black Knob Knob 2 - 10 0,170 03 8408 02 20 03 0424 02 Black Knob Knob or Pilot 2 - 10 0,210 03 8408 02 21 03 0419 02 Black Rotary Knob Rotary Knob 2 - 10 0,290 03 8408 02 21 03 0418 02 801 Chrome Key Key 2 - 10 0,360 03 8408 02 21 03 0481 02 Black Pedal Spring 2 - 10 1,030 03 8408 02 21 03 0483 02 Black Pedal Pedal 2 - 10 1,070 03 8408 02 22 10 1 2 10 3 12 1 2 10 3 12 1 2 10 3 12 1 2 10 3 12 1 2 10 3 12 1 2 10 3 6/96 Operator 10 2 3 Colour 1 3 12 Model 1 Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. N/** 5.6.081.03 Super ‘X’ General Information G1/8 3/2 Manual Valves with Electrical Style Operating Heads Symbol 12 2 10 1 3 12 2 10 1 3 12 2 3 12 10 1 2 Model Colour Operator Return Operating Pressure (bar) Weight (kg) Spares Kit Page no. 03 0269 02 03 0270 02 03 0271 02 03 0263 02 03 0264 02 03 0265 02 03 0266 02 03 0267 02 03 0268 02 Red Green Black Red Green Black Red Green Black Button (Palm) Spring 2 - 10 0,221 03 8408 02 23 Button (Mushroom) Spring 2 - 10 0,221 03 8408 02 22 Button (Shrouded) Spring 2 - 10 0,214 03 8408 02 23 03 0272 02 Red Button Key 2 - 10 0,242 03 8408 02 23 03 0273 02 - Switch Switch 2 - 10 0,250 03 8408 02 23 03 0261 02 Black Rotary knob Rotary knob 2 - 10 0,229 03 8408 02 22 03 0262 02 - Key Key 2 - 10 0,300 03 8408 02 22 Model Colour Operator Return Operating Pressure (bar) Weight (kg) Spares Kit Page no. 03 0295 02 - Adapter Spring 2 - 10 2,21 03 8408 02 24 10 1 3 2 10 12 1 3 12 2 10 1 3 12 2 10 1 3 G1/8 3/2 Adapter valve Symbol 12 2 3 10 1 N/** 5.6.081.04 Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 6/96 General Information Super ‘X’ G1/8 5/2 & 5/3 Manual Valves Symbol 14 4 2 12 5 1 3 14 4 2 12 5 1 3 14 4 2 12 5 1 3 14 2 12 4 5 1 3 14 4 Model Colour Operator Mid-position Return Operating Pressure (bar) Weight (kg) Spares kit Page no. X3 0444 02 X3 0445 02 X3 0446 02 X3 0386 02 X3 0387 02 X3 0388 02 X3 0454 02 X3 0455 02 X3 0456 02 X3 0448 02 X3 0460 02 X3 0461 02 Black Green Red Red Green Black Black Green Red Black Green Red Button (Palm) - Spring 2 - 10 0,260 03 8408 02 25 Button (Palm) - Spring 2 - 10 0,400 03 8408 02 25 Button (Shrouded) - Spring 2 - 10 0,320 03 8408 02 25 Button (Palm) - Pilot 2 - 10 0,340 03 8408 02 25 X3 0465 02 Black Knob, push - Knob, Pull 2 - 10 0,280 03 8408 02 28 X3 0297 02 Red Emergency Stop - Spring 2 - 10 0,337 03 8408 02 26 X3 0468 02 Red Emergency Stop - Twist Ring 2 - 10 0,540 03 8473 02 26 X3 0375 02 Red Palm Button, push - Key 2 - 10 0,480 03 8408 02 26 X3 0478 02 Black Lever - Spring 2 - 10 0,400 03 8408 02 27 X3 0466 02 Black Lever - Spring 2 - 10 0,350 03 8408 02 27 X3 0443 02 X3 0477 02 X3 0296 02 Black Black Black Lever Lever Lever - Lever Lever Lever 2 - 10 2 - 10 2 - 10 0,270 0,400 0,360 03 8408 02 03 8408 02 03 8408 02 27 27 26 X3 3438 02 Black Lever APB Lever 2 - 10 0,850 03 8408 02 27 X3 3478 02 Black Lever COE Lever 2 - 10 0,850 03 8408 02 27 X3 3437 02 Black Lever APB Lever 2 - 10 0,440 03 8408 02 27 X3 3477 02 Black Lever COE Lever 2 - 10 0,440 03 8408 02 27 X3 0464 02 Black Knob (push) - Knob (pull) or Pilot 2 - 10 0,320 03 8408 02 28 X3 0459 02 Black Rotary Knob - Rotary Knob 2 - 10 0,400 03 8408 02 28 X3 0458 02 801 Chrome Key - Key 2 - 10 0,470 03 8408 02 28 X3 0482 02 Black Pedal - Spring 2 - 10 1,120 03 8408 02 29 X3 0484 02 Black Pedal - Pedal 2 - 10 1,180 03 8408 02 29 2 12 5 1 3 14 4 2 12 5 1 3 4 14 2 12 5 1 3 4 2 12 14 5 1 3 4 2 14 12 5 1 3 4 2 14 12 5 1 3 4 2 14 12 5 1 3 4 2 14 12 5 1 3 14 4 2 12 5 1 3 14 4 2 12 5 1 3 14 4 2 12 5 1 3 14 4 2 12 5 1 3 14 4 2 12 5 1 3 APB = All Ports Blocked, COE = Centre Open Exhaust. 6/96 Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. N/** 5.6.081.05 Super ‘X’ General Information G1/8 5/2 Manual Valves with Electrical Style Operating Heads Symbol 14 4 2 12 5 1 3 14 4 2 12 5 1 3 14 4 2 12 5 1 3 14 4 Model Colour Operator Return Operating Pressure (bar) Weight (kg) Spares Kit Page no. X3 0269 02 X3 0270 02 X3 0271 02 X3 0263 02 X3 0264 02 X3 0265 02 X3 0266 02 X3 0267 02 X3 0268 02 Red Green Black Red Green Black Red Green Black Button (Palm) Spring 2 - 10 0,308 03 8408 02 30 Button (Mushroom) Spring 2 - 10 0,308 03 8408 02 30 Button (Shrouded) Spring 2 - 10 0,301 03 8408 02 30 X0 0272 02 Red Button Key 2 - 10 0,329 03 8408 02 30 X3 0273 02 - Switch Switch 2 - 10 0.340 03 8408 02 31 X3 0261 02 Black Rotary knob Rotary knob 2 - 10 0,316 03 8408 02 29 X3 0262 02 - Key Key 2 - 10 0,386 03 8408 02 29 Model Colour Operator Return Operating Pressure (bar) Weight (kg) Spares Kit Page no. X3 0395 02 - Adapter Spring 2 - 10 2,21 03 8408 02 31 Model Colour Operator Return Operating Pressure (bar) Weight (kg) Spares kit Page no. 03 0604 02 Black Button Spring 2 - 10 0,350 03 8602 02 32 03 0608 02 Black Button Pilot 2 - 10 0,420 03 8612 02 32 03 0638 02 Black Lever Spring 2 - 10 0,480 03 8602 02 32 03 0637 02 Black Lever Lever 2 - 10 0,490 03 8602 02 32 03 0625 02 Black Knob Knob 2 - 10 0,370 03 8602 02 32 03 0627 02 Black Knob Knob or Pilot 2 - 10 0,410 03 8612 02 33 03 0681 02 Black Pedal Spring 2 - 10 1,230 03 8602 02 33 03 0683 02 Black Pedal Pedal 2 - 10 1,270 03 8602 02 33 2 12 5 1 3 4 14 14 2 12 5 1 3 4 2 12 5 1 3 4 14 2 12 5 1 3 G1/8 5/2 Adapter valve Symbol 14 4 2 12 5 1 3 G1/4 3/2 Manual Valves Symbol 12 2 3 12 10 1 2 10 1 3 2 12 3 10 1 2 10 12 3 12 1 2 10 3 12 1 2 10 3 12 1 2 10 3 12 1 2 10 3 1 N/** 5.6.081.06 Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 6/96 General Information Super ‘X’ G1/4 5/2 & 5/3 Manual Valves Symbol 14 4 Model Colour Operator Mid-position Return Operating Pressure (bar) Weight (kg) Spares kit Page no. X3 0644 02 Black Button - Spring 2 - 10 0,470 03 8602 02 34 X3 0648 02 Black Button - Pilot 2 - 10 0,540 03 8612 02 34 X3 0678 02 Black Lever - Spring 2 - 10 0,600 03 8602 02 34 X3 0677 02 Black Lever - Lever 2 - 10 0,610 03 8602 02 34 X3 3638 02 Black Lever APB Lever 2 - 10 1,060 03 8602 02 34 X3 3678 02 Black Lever COE Lever 2 - 10 1,060 03 8602 02 34 X3 3637 02 Black Lever APB Lever 2 - 10 0,650 03 8602 02 34 X3 3677 02 Black Lever COE Lever 2 - 10 0,650 03 8602 02 34 X3 0665 02 Black Knob - Knob 2 - 10 0,490 03 8602 02 35 X3 0682 02 Black Pedal - Spring 2 - 10 1,330 03 8602 02 35 X3 0684 02 Black Pedal - Pedal 2 - 10 1,390 03 8602 02 35 2 12 5 1 3 14 4 2 12 5 1 3 4 14 2 12 5 1 3 4 2 12 14 5 1 3 14 4 2 12 5 1 3 14 4 2 12 5 1 3 4 2 14 12 5 1 3 4 2 14 12 5 1 3 14 4 2 12 5 1 3 14 4 2 12 5 1 3 14 4 2 12 5 1 3 APB = All Ports Blocked, COE = Centre Open Exhaust. G1/8 5/2 and 3/2 Adapter Valve Heads Model No. M/P 34840/R M/P 34840/G M/P 34840/N M/P 34841/R M/P 34841/G M/P 34841/N M/P 34842/R M/P 34842/G M/P 34842/N M/P 34862 M/P 34846 M/P 34843 M/P 34845 6/96 Operator Type Button (Palm)/Spring Momentary Action Button (Shrouded)/Spring Momentary Action Button (Mushroom)/Spring Momentary Action Emergency Stop Button/Key Switch/Switch Rotary Knob/Rotary Knob Key/Key Maintained Action Maintained Action Maintained Action Maintained Action Colour Red Green Black Red Green Black Red Green Black Red - Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. N/** 5.6.081.07 Mechanical G1/8 3/2 Super ‘X’ 03 0400 02 G1/8 3/2 Plunger Actuated Spring Return Valve 03 0417 02 G1/8 3/2 Plunger Actuated Pilot Return Valve 4,8 ‘2’ ‘3’ ‘2’ ‘12’ ‘10’ ‘3’ ‘1’ ‘10’ ‘1’ 5,4 32,5 10 5,4 32,5 22 19 17 24 19 ‘12’ 22 9 36 9 36 38 38 22 4,8 max. 10 10 10 24 77 21 21 G1/8 7,5 7,5 82,5 G1/8 G1/8 Operating Force: 31N The plunger on this valve is designed for axial loading only. Operating Force: 18N, ‘10’ at zero bar Reset Pressure: 2 bar minimum; Full Movement: 4,8mm The plunger on this valve is designed for axial loading only. This valve can be panel mounted. Panel Cut-out: Ø15; Panel thickness: 5mm 03 0402 02 G1/8 3/2 Roller Actuated Spring Return Valve 03 0411 02 G1/8 3/2 Roller Lever Actuated Spring Return Valve 8 4,5 38 38 3 19 9 17 19 17 ‘1’ ‘3’ ‘1’ 5,4 5,4 10 10 34 36 ‘10’ 22 ‘2’ ‘12’ 30 ‘3’ ‘10’ 59 22 ‘2’ ‘12’ 12 36 19 9 54 10 10 100 8,5 21 21 16 4 80 G1/8 G1/8 Operating Force: 31N Maximum Recommended Cam Rise: 4,5 mm Cam Angle of Approach: 30° maximum Cam Speed: 8 m/min. maximum Operating Speed: 300 cpm N/** 5.6.081.08 Operating Force: 18N; Operating Travel: 8 mm Over-travel: 3mm Cam Angle of Approach: 45° maximum Cam Speed: 8 m/min. maximum Operating Speed: 300 cpm Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 6/96 Mechanical G1/8 3/2 Super ‘X’ 03 0293 02 G1/8 3/2 Heavy Duty Roller Lever Actuated Spring Return Valve 03 0423 02 G1/8 3/2 Sensitive Roller Lever Actuated Spring Return Valve 3 8 73 9 38 9,8 5,4 19 17 ‘3’ 8,8 20 38 17 ‘10’ 36 ‘2’ ‘12’ '1' 22 25 19 '3' 40 9 '2' '10' 22 24 '12' 19 28 65 1 113 1 ‘1’ G1/8 5,4 10 67 10 8,5 21 16 21 G1/8 19 G1/8 18 Operating Force: 18N; Operating Travel: 8 mm Over-travel: 1mm Cam Angle of Approach: 45° maximum Cam Speed: 8 m/min. maximum Operating Speed: 300 cpm Operating Force: 1N Constant Pilot Supply: 2 bar minimum Pre-travel: 1 mm; Over-travel: 3 mm Cam Angle of Approach: 45° maximum Cam Speed: 6,5 m/min. maximum 03 0409 02 G1/8 3/2 Roller Actuated Pilot Return Valve 03 0427 02 G1/8 3/2 Roller Lever Actuated Pilot Return Valve 8 38 19 38 3 22 ‘10’ ‘3’ 30 ‘1’ ‘2’ ‘12’ 59 ‘3’ 19 5,4 ‘10’ ‘1’ 5,4 10 34 22 19 ‘2’ ‘12’ 12 22 36 9 36 9 22 4,5 10 24 10 54 10 24 85 G1/8 8,5 21 16 21 4 G1/8 105 G1/8 Operating Force: 18N, ‘10’ at zero bar Reset Pressure: 2 bar minimum Maximum Recommended Cam Rise: 4,5 mm Cam Angle of Approach: 30° maximum Cam Speed: 8 m/min. maximum Operating Speed: 300 cpm 6/96 G1/8 Operating Force: 9N, ‘10’ at zero bar Reset Pressure: 2 bar minimum Operating travel: 8 mm; Over-travel: 3 mm Cam Angle of Approach: 45° maximum Cam Speed: 8 m/min. maximum Operating Speed: 300 cpm Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. N/** 5.6.081.09 Mechanical G1/8 3/2 Super ‘X’ 03 0294 02 G1/8 3/2 Heavy Duty One Way Trip Actuated Spring Return Valve 73 9 38 9 28 '2' '10' 22 24 ‘1’ '3' 51 5,4 10 63 '12' 25 30 ‘3’ ‘10’ 5,4 9,8 9 36 ‘2’ ‘12’ 56 17 19 22 9 36 03 0410 02 G1/8 3/2 One-way Trip Actuated Spring Return Valve '1' 8,8 20 38 17 10 109 21 8 21 16 G1/8 G1/8 19 Operating Force: 31N Cam Rise: 9 mm Cam Angle of Approach: 90° maximum Cam Speed: 2 m/min. maximum Operating Speed: 120 cpm Operating Force: 31N Cam Rise: 9 mm Cam Angle of Approach: 90° maximum Cam Speed: 2 m/min. maximum Operating Speed: 120 cpm 03 0432 02 G1/8 3/2 Antenna Actuated Spring Return Valve 70 38 10 ‘3’ ‘10’ 36 ‘2’ ‘12’ 17 22 19 13 9 ‘1’ 5,4 7 G1/8 10 10 21 161 44 G1/8 Operating Force: 0,3N at tip Constant Pilot Supply: 2 bar minimum Operating Movement: 10 mm minimum in any direction. N/** 5.6.081.10 Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 6/96 Mechanical G1/8 5/2 Super ‘X’ X3 0440 02 G1/8 5/2 Plunger Actuated Spring Return Valve X3 0457 02 G1/8 5/2 Plunger Actuated Pilot Return Valve 60,5 60,5 20 10 4,8 ‘5’ ‘1’ 32,5 ‘12’ ‘3’ ‘2’ ‘5’ 9 20 ‘4’ ‘14’ 24 ‘2’ 5,4 36 22 36 ‘4’ ‘14’ 22 20 10 17 5,4 ‘1’ 32,5 20 ‘12’ ‘3’ 25 9 20 99,5 22 4,8 20 21 7,5 7,5 104,5 G1/8 G1/8 Operating Force: 54N Full Movement: 4,8 mm The plunger on this valve is designed for axial loading only. Operating Force: 22N, ‘12’ at zero bar Reset Pressure: 2 bar minimum; Full Movement: 4,8 mm The plunger on this valve is designed for axial mounting only. This valve can be panel mounted. Panel Cut-out: Ø15 mm; Maxcimum Panel Thickness: 5 mm X3 0442 02 G1/8 5/2 Plunger Actuated Pilot Return Valve X3 0451 02 G1/8 5/2 Roller Lever Actuated Spring Return Valve 60,5 4,5 60,5 8 20 20 3 10 10 17 5,4 17 ‘5’ ‘1’ 35 ‘14’ ‘3’ ‘2’ ‘5’ ‘1’ ‘12’ ‘3’ 9 9 20 ‘4’ 36 ‘12’ 22 ‘2’ 59 ‘4’ 30 ‘14’ 12 22 36 19 5,4 55 20 20 20 122,5 8,5 21 21 16 4 102,5 G1/8 G1/8 Operating Force: 54N Maximum Recommended Can Rise: 4,5 mm Cam Angle of Approach: 30° maximum Cam Speed: 8 m/min. maximum Operating Speed: 300 cpm 6/96 Operating Force: 31N; Operating Travel: 8 mm Over-travel: 3mm Cam Angle of Approach: 45° maximum Cam Speed: 8 m/min. maximum Operating Speed: 300 cpm Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. N/** 5.6.081.11 Mechanical G1/8 5/2 Super ‘X’ X3 0393 02 G1/8 5/2 Heavy Duty Roller Lever Actuated Spring Return Valve X3 0463 02 G1/8 5/2 Sensitive Roller Lever Actuated Spring Return Valve 3 20 '1' 65 '12' '14' '5' ‘2’ ‘5’ 17 20 ‘4’ ‘14’ '3' 12 20 60 40 17 5,4 '2' 22 24 '4' 19 10 19 9,8 25 60,5 ‘1’ G1/8 ‘12’ 36 9 28 22 1 1 95 20 8 ‘3’ 9 68 20 20 8,5 21 16 21 135 G1/8 G1/8 18 Operating Force: 31N; Operating Travel: 8 mm Over-travel: 1mm Cam Angle of Approach: 45° maximum Cam Speed: 8 m/min. maximum Operating Speed: 300 cpm Operating Force: 1N Constant Pilot Supply: 3 bar minimum Pre-travel: 1 mm; Over-travel: 3mm Cam Angle of Approach: 45° maximum Cam Speed: 6,5 m/min. maximum X3 0449 02 G1/8 5/2 Roller Actuated Pilot Return Valve X3 0467 02 G1/8 5/2 Roller Lever Actuated Pilot Return Valve 60,5 4,5 60,5 8 20 20 3 10 10 22 5,4 22 ‘5’ ‘1’ 35 ‘3’ ‘4’ ‘14’ ‘5’ ‘1’ 55 20 ‘3’ 20 25 G1/8 21 16 8,5 G1/8 4 21 G1/8 Operating Force: 22N, ‘12’ at zero bar Reset Pressure: 2 bar minimum Maximum Recommended Cam Rise: 4,5 mm Cam Angle of Approach: 30° maximum Cam Speed: 8 m/min. maximum Operating Speed: 300 cpm 20 127,5 107,5 N/** 5.6.081.12 ‘12’ 9 9 20 ‘2’ 36 ‘12’ 22 ‘2’ 30 ‘4’ 59 ‘14’ 12 22 36 19 5,4 G1/8 Operating Force: 9N, ‘12’ at zero bar Reset Pressure: 2 bar minimum Operating Travel: 8 mm; Over-travel: 3mm Cam Angle of Approach: 45° maximum Cam Speed: 8 m/min. maximum Operating Speed: 300 cpm Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 6/96 Mechanical G1/8 5/2 Super ‘X’ X3 0450 02 G1/8 5/2 One-way Trip Actuated Spring Return Valve X3 0394 02 G1/8 5/2 Heavy Duty One Way Trip Actuated Spring Valve 60,5 20 9 10 17 ‘3’ 64 25 9 20 5,4 '2' '14' 20 '12' '1' '5' 51 8,8 20 '3' 20 60 8 21 131,5 21 16 95 20 '4' 19 ‘1’ 9,8 24 30 ‘5’ 9 ‘12’ 36 56 ‘2’ 22 ‘4’ ‘14’ 9 36 28 22 5,4 G1/8 G1/8 Operating Force: 31N Cam Rise: 9mm Cam Angle of Approach: 90° maximum Cam Speed: 2 m/min. maximum Operating Speed: 120 cpm Operating Force: 31N Cam Rise: 9mm Cam Angle of Approach: 90° maximum Cam Speed: 2 m/min. maximum Operating Speed: 120 cpm X3 0472 02 G1/8 5/2 Antenna Actuated Spring Return Valve 92,5 60,5 20 10 ‘4’ ‘2’ ‘5’ ‘1’ ‘12’ 36 13 10 ‘14’ 22 17 5,4 ‘3’ 9 7 G1/8 20 20 21 183 45 G1/8 Operating Force: 0,3N at tip Constant Pilot Supply: 3 bar minimum Operating Movement: 10 mm minimum in any direction 6/96 Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. N/** 5.6.081.13 Mechanical G1/4 3/2 Super ‘X’ 03 0600 02 G1/4 3/2 Plunger Actuated Spring Return Valve 03 0602 02 G1/4 3/2 Roller Actuated Spring Return Valve 43,2 max 43 43 11,5 11,5 7 ‘12’ ‘12’ 19 30 ‘2’ ‘10’ ‘1’ ‘3’ ‘1’ ‘3’ 10 47 30 ‘2’ ‘10’ 47 8,5 max 8 24 6,5 6,5 22 22 11,5 11,5 11,5 11,5 110 7,5 28 28 97 G1/4 G1/4 22 22 Operating Force: 53N The plunger on this valve is designed for axial loading only. Operating Force: 61N Cam Angle of Approach: 45° maximum Cam Speed: 6 m/min. maximum Operating Speed: 200 cpm 03 0611 02 G1/4 3/2 Roller Lever Actuated Spring Return Valve 03 0609 02 G1/4 3/2 Roller Actuated Pilot Return Valve 70 max. 43 13,8 max 11,5 43 12 ‘3’ ‘1’ 8 ‘1’ 6,5 11,5 ‘3’ 47 19 ‘2’ ‘10’ 47 ‘12’ ‘2’ ‘10’ 30 ‘12’ 30 Ø24 11,5 6,5 22 31 11,5 11,5 118 11,5 7,5 11,5 18 28 28 G1/8 124 G1/4 G1/4 Operating Force: 45N Cam Angle of Approach: 45° maximum Cam Speed: 5 m/min. maximum Operating Speed: 150 cpm N/** 5.6.081.14 22 Operating Force: 13N, ‘10’ at zero bar Reset Pressure: 2 bar minimum Cam Angle of Approach: 45° maximum Cam Speed: 6 m/min. maximum Operating Speed: 200 cpm Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 6/96 Mechanical G1/4 3/2 Super ‘X’ 03 0624 02 G1/4 3/2 Roller Lever Actuated Pilot Return Valve 70 max. 13,8 max 43 12 24 11,5 ‘3’ 6,5 11,5 47 ‘2’ ‘10’ 30 ‘12’ ‘1’ 31 11,5 18 11,5 28 G1/8 124 G1/4 Operating Force: 9N, ‘10’ at zero bar Reset Pressure: 2 bar minimum Cam Angle of Approach: 45° maximum Cam Speed: 5 m/min. maximum Operating Speed: 150 cpm 6/96 Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. N/** 5.6.081.15 Mechanical G1/4 5/2 Super ‘X’ X3 0640 02 G1/4 5/2 Plunger Actuated Spring Return Valve X3 0642 02 G1/4 5/2 Roller Actuated Spring Return Valve 42 65 11,5 7 65 23 11,5 6,5 6,5 ‘2’ ‘12’ ‘14’ ‘1’ ‘5’ ‘2’ ‘12’ 30 ‘4’ 19 47 ‘4’ 30 ‘14’ 10 23 ‘3’ ‘1’ ‘5’ 47 8 max. ‘3’ 8 24 11,5 23 11,5 22 23 23 23 119 22 7,5 28 28 132 G1/4 G1/4 22 22 Operating Force: 62N The plunger on this valve is designed for axial loading only. Operating Force: 67N Cam Angle of Approach: 45° maximum Cam Speed: 6 m/min. maximum Operating Speed: 200 cpm X3 0651 02 G1/4 5/2 Roller Lever Actuated Spring Return Valve X3 0649 02 G1/4 5/2 Roller Actuated Pilot Return Valve 69 14,5 65 65 11,5 23 11,5 6,5 23 24 6,5 ‘1’ ‘5’ ‘4’ ‘2’ ‘12’ 19 30 ‘14’ ‘2’ ‘12’ 47 ‘4’ 30 ‘14’ ‘1’ ‘5’ 47 11,5 ‘3’ 8 ‘3’ 11,5 11,5 23 22 23 140 23 G1/8 23 7,5 28 146 11,5 18 28 G1/4 G1/4 Operating Force: 45N Cam Angle of Approach: 45° maximum Cam Speed: 5 m/min. maximum Operating Speed: 150 cpm N/** 5.6.081.16 22 Operating Force: 13N, ‘12’ at zero bar Reset Pressure: 2 bar minimum Cam Angle of Approach: 45° maximum Cam Speed: 6 m/min. maximum Operating Speed: 200 cpm Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 6/96 Mechanical G1/4 5/2 Super ‘X’ X3 0664 02 G1/4 5/2 Roller Lever Actuated Pilot Return Valve 70 max. 14,5 11,5 65 11,5 23 24 6,5 ‘2’ ‘12’ 30 ‘4’ ‘1’ ‘5’ 47 ‘14’ ‘3’ 11,5 23 23 31 18 11,5 28 G1/8 154 G1/4 Operating Force: 9N, ‘12’ at zero bar Reset Pressure: 2 bar minimum Cam Angle of Approach: 45° maximum Cam Speed: 5 m/min. maximum Operating Speed: 150 cpm Man G1/8–5/2 6/96 Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. N/** 5.6.081.17 Manual G1/8 3/2 Super ‘X’ 03 0404 02, 03 0405 02, 03 0406 02 Models G1⁄8 3/2 Button Operated Spring Return Valves 03 0366 02, 03 0367 02, 03 0368 02 Models G1⁄8 3/2 Button (Palm) Operated Spring Return Valves 20 38 38 17 19 ‘2’ ‘3’ ‘10’ 22 30 ‘12’ 36 9 19 ‘2’ ‘12’ 17 ‘10’ ‘1’ ‘3’ 36 9 22 4,76 ‘1’ 5,4 5 max. 5,4 10 10 10 10 89 63 21 21 38 19 24 106 G1/8 G1/8 Operating Force: 31N These valves are suitable for panel mounting by means of an optional nut and washer, reference 03 0430 00; a shrouded panel mounting kit is also available, reference 03 0429 00. Panel Hole: Ø15 mm; Panel Thickness: 5 mm maximum Operating Force: 31N These valves are suitable for panel mounting. Panel Hole: Ø32,1 mm; Panel Thickness: 6 mm maximum 03 0414 02, 03 0415 02, 03 0416 02 Models G1⁄8 3/2 Button (Shrouded) Operated Spring Return Valves 03 0408 02, 03 0420 02, 03 0421 02 Models G1⁄8 3/2 Button Operated Pilot Return Valve 38 38 17 ‘3’ ‘10’ ‘1’ 22 19 ‘2’ ‘12’ 30 ‘12’ 9 36 ‘2’ 22 4,76 ‘3’ ‘10’ 36 19 22 9 ‘1’ 5,4 10 5,4 5 max. 10 10 10 79,5 24 10 max. Operating Force: 31N These valves are suitable for panel mounting. Panel Hole: Ø31 mm; Panel Thickness: 10mm maximum N/** 5.6.081.18 21 24 G1/8 19 A/F 34 21 G1/8 94 G1/8 Operating Force: 18N, pilot port ‘10’ at zero bar Reset Pressure: 2 bar minimum These valves are suitable for panel mounting by means of an optional nut and washer, reference 03 0430 00; a shrouded panel mounting kit is also available, reference 03 0429 00. Panel Hole: Ø15 mm; Panel Thickness: 5 mm maximum Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 6/96 Manual G1/8 3/2 Super ‘X’ 03 0428 02 G1⁄8 3/2 Palm Button Operated, Twist Return Valve (Emergency Stop) 03 0297 02 G1⁄8 3/2 Button (Palm) Operated Spring Return Valve 20 38 9 45 5 Travel 17 19 26,3 9,8 9 5 ‘3’ ‘1’ ‘1’ 12 20 37,5 5,4 5,1 ‘10’ ‘3’ 22 35 36 ‘10’ 22 ‘12’ ‘12’ 36 ‘2’ ‘2’ 17 10 10 63 115 21 21 38 G1/8 19 G1/8 Operating Force: 18N Valve latches when button is depressed and returns when the locking ring is rotated anti-clockwise. This valve is suitable for panel mounting. Panel Hole: 32,1 mm; Panel Thickness: 8 mm maximum Operating Force: 70N (Return Torque: 6,8Nm) This valve is suitable for panel mounting. Panel Hole: 22,5 mm; Panel Thickness: 8 mm maximum 03 0335 02 G1⁄8 3/2 Button (Palm) Operated Key Return Valve 03 0296 02 G1⁄8 3/2 Lever Operated Lever Return Valve 82 20 27 38 ‘3’ ‘2’ 36 22 ‘10’ ‘3’ 22 ‘10’ ‘12’ ‘2’ ‘12’ 9 9.8 17 R 47 19 9 ‘1’ ‘1’ 39 5,4 38 17 10 10 63 114 38 21 21 G1/8 19 G1/8 Operating Force: 31N Valve latches when button is depressed. To reset, turn key. This valve is suitable for panel mounting. Panel Hole: 32,1; Panel Thickness: 6mm maximum 6/96 Operating Force: 13N This valve is suitable for panel mounting. Panel Hole: 22,5 mm; Panel Thickness: 6 mm maximum Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. N/** 5.6.081.19 Manual G1/8 3/2 Super ‘X’ 03 0403 02 G1/8 3/2 Lever Operated Spring Return Valve 03 0438 02 & 03 0437 02 Models G1⁄8 3/2 Lever Operated Spring Return Valves ‘3’ 21 ‘10’ 36 ‘2’ 22 90° 17 19 ‘12’ 93 38 9 ‘1’ 5 max. G1/8 5,4 10 10 89 78 38 G /8 ‘3’ 22 ‘10’ 36 ‘2’ ‘12’ 1 17 19 9 21 19 A/F 24 M4x0,7 ‘1’ 21 5,4 10 10 Operating Force: 28N This valve is suitable for panel mounting. A fingertip extension is available for this valve, reference 07 0033 01. Panel Hole: Ø15 mm; Panel Thickness: 5 mm maximum Operating Force: 9N 03 0426 02 G1⁄8 3/2 Lever Operated Spring Return Valve 03 0425 02 G1⁄8 3/2 Knob Operated Knob Return Valve 38 3 38 17 9 30 ‘10’ ‘1’ 19 ‘2’ ‘12’ 22 ‘3’ 36 ‘2’ ‘12’ 22 4,76 ‘3’ ‘10’ 17 36 19 9 22 8 Model 03 0437 02 features a positive detent in each position and is suitable for panel mounting by means of a bezel kit, reference 03 3437 64. Panel Hole: Ø24 mm Panel Thickness: 8 mm maximum ‘1’ 5,4 5 max. 10 10 5,4 10 10 109 Operating Force: 18N Panel Hole: Ø24 mm; Panel Thickness: 8 mm maximum N/** 5.6.081.20 21 19 A/F G1/8 24 21 97 G1/8 Operating Force: 18N This valve is suitable for panel mounting by means of an optional nut and washer, reference 03 0430 00. Panel Hole: Ø15 mm; Panel Thickness: 5 mm maximum Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 6/96 Manual G1/8 3/2 Super ‘X’ 03 0424 02 G1⁄8 3/2 Knob Operated, Knob or Pilot Return Valve 03 0419 02 G1⁄8 3/2 Rotary Knob Operated Rotary Knob Return Valve 33,6 38 34,1 38 ‘2’ ‘3’ ‘10’ 22 22 ‘12’ 36 9 17 19 ‘2’ ‘12’ ‘10’ ‘1’ ‘3’ 36 22 19 22 9 4,76 ‘1’ 5,4 5 max. 10 5,4 24 10 10 45° 10 102 45° 78,6 21 27 41,3 21 24 19 A/F G1/8 112,7 G1/8 G1/8 Operating Force: 18N Reset Pressure: 2 bar minimum This valve is suitable for panel mounting by means of an optional nut and washer, reference 03 0430 00. Panel Hole: Ø15 mm; Panel Thickness: 5 mm maximum Switch shown in non-operated position This valve is sutiable for panel mounting. Panel Hole: Ø32,1; Panel Thickness: 6mm maximum 03 0418 02 801 G1⁄8 3/2 Key Operated Key Return Valve 03 0481 02 G1⁄8 3/2 Pedal Operated Spring Return Valve 187 33,6 5° 23,8 39,7 38 19 45° 17 45° ‘1’ G1/8 5,4 10 65 10 100 68 12 78,6 21 30,1 60 118,3 68 ‘3’ ‘10’ 36 ‘2’ ‘12’ 22 71 9 12 G1/8 6,5 The key is removable in both positions. Key slot shown in non-operated position. Two keys are supplied. This valve is suitable for panel mounting. Panel Hole: Ø32,1 mm Panel Thickness: 6 mm maximum 6/96 Operating Force: 22N A foot guard is available for this valve, reference 03 0480 60. Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. N/** 5.6.081.21 Manual G1/8 3/2 Super ‘X’ 03 0483 02 G1⁄8 3/2 Pedal Operated Pedal Return Valve 03 0261 02 G1/8 3/2 Electrical Style Rotary Knob Operator, Rotary Knob Return Valve 187 1.6 min. 5 max. 25 5° 48 26,3 9,8 9 71 ‘2’ ‘10’ ‘12’ ‘3’ 22 36 ‘1’ 20 37,5 G1/8 65 17 100 12 68 29,5 60 68 G1/8 21 12 19 6,5 Operating Force: 22N A foot guard is available for this valve, reference 03 0480 60. Operating Torque: 6,8Nm Panel Hole: Ø 22,5 mm Panel Thickness: 5 mm maximum 03 0262 02 G1/8 3/2 Electrical Style Key Operator, Key Return Valve 03 0263 02, 03 0264 02, 03 0265 02 G1/8 3/2 Electrical Style Push Button (Mushroom) Operator Spring Return Valve 1.6 min. 5 max. 48 48 26,3 9,8 1.6 min. 5 max. 9 31 26,3 9,8 9 24 ‘2’ ‘3’ 56 ‘2’ ‘10’ ‘12’ ‘1’ ‘3’ 20 17 37,5 G1/8 17 21 35 29,5 G1/8 19 N/** 5.6.081.22 22 36 ‘1’ 20 37,5 Operating Force: 6,8Nm Panel Hole: Ø 22,5 mm Panel Thickness: 5 mm maximum ‘10’ ‘12’ 22 36 21 19 Operating Force: 50N Panel Hole: Ø 22,5 mm Panel Thickness: 5 mm maximum Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 6/96 Manual G1/8 3/2 Super ‘X’ 03 0266 02, 03 0267 02, 03 0268 02 G1/8 3/2 Electrical Style Push Button (Shrouded) Operator, Spring Return Valve 03 0269 02, 03 0270 02, 03 0271 02 G1/8 3/2 Electrical Style Push Button (Extended) Operator, Spring Return Valve 48 26,3 9,8 1.6 min. 5 max. 1.6 min. 5 max. 9 48 26,3 9,8 9 19 ‘2’ ‘3’ 12 ‘2’ ‘10’ ‘12’ ‘10’ ‘12’ 22 36 ‘1’ ‘3’ 22 36 ‘1’ 20 20 17 37,5 17 37,5 G1/8 29,5 29,5 G1/8 21 21 19 19 Operating Force: 50N Panel Hole: Ø 22,5 mm Panel Thickness: 5 mm maximum Operating Force: 50N Panel Hole: Ø 22,5 mm Panel Thickness: 5 mm maximum 03 0272 02 G1/8 3/2 Electrical Style Push Button Operator, Key Reset Valve 03 0273 02 G1/8 3/2 Electrical Style Switch Operator, Switch Return Valve 1.6 min. 5 max. 48 26,3 9,8 1.6 min. 5 max. 9 39 48 26,3 9,8 9 22 ‘2’ ‘3’ 62 ‘2’ ‘10’ ‘12’ ‘1’ ‘3’ 20 17 37,5 G1/8 17 35 21 29,5 G1/8 19 6/96 22 36 ‘1’ 20 37,5 Operating Force: 50N Panel Hole: Ø 22,5 mm Panel Thickness: 5 mm maximum ‘10’ ‘12’ 22 36 21 19 Operating Force: 40N Panel Hole: Ø 22,5 mm Panel Thickness: 5 mm maximum Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. N/** 5.6.081.23 Manual G1/8 3/2 Super ‘X’ 03 0295 02 G1/8 3/2 Adapter Valve 26,3 9,8 9 ‘2’ ‘10’ ‘12’ ‘3’ 22 36 ‘1’ 20 37,5 17 G1/8 21 19 This valve is for use with standard electrical style Operating heads. For details see page 36. Operating Force (including Operator): see page xx Panel Hole: Ø22,5 mm Panel Thickness: 5 mm maximum N/** 5.6.081.24 Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 6/96 Manual G1/8 5/2 Super ‘X’ X3 0444 02, X3 0445 02, X3 0446 02 G1/8 5/2 Button (Palm) Operated Spring Return Valves X3 0386 02, X3 0387 02, X3 0388 02 G1/8 5/2 Button (Palm) Operated Spring Return Valves 60,5 60,5 10 20 10 20 ‘5’ ‘1’ 5 max. ‘5’ ‘3’ ‘1’ 20 ‘12’ ‘3’ 9 9 44 ‘2’ 36 ‘4’ ‘14’ 22 ‘12’ 36 30 ‘2’ 22 ‘4’ ‘14’ 17 5,4 17 5,4 4,76 20 20 20 87 111,5 21 38 21 24 19 A/F 130 G1/8 G1/8 Operating Force: 54N These valves are suitable for panel mounting by means of an optional nut and washer, reference 03 0430 00; a shrouded panel mounting kit is also available, reference 03 0429 00. Panel Hole: Ø15 mm; Panel Thickness: 5mm maximum Operating Force: 31N These valves are suitable for panel mounting. Panel Hole: Ø32,1 mm Panel Thickness: 6 mm maximum X3 0454 02, X3 0455 02, X3 0456 02 G1/8 5/2 Button (Shrouded) Operated Spring Return Valves X3 0448 02, X3 0460 02, X3 0461 02 G1/8 5/2 Button (Palm) Operated Pilot Return Valves 60,5 60,5 10 20 10 20 ‘5’ ‘1’ ‘3’ 20 ‘4’ ‘2’ ‘5’ 9 34,5 ‘14’ 5 max. 20 44 102 ‘1’ ‘12’ 22 ‘12’ 30 ‘2’ 36 ‘4’ 22 ‘14’ 22 5,4 4,76 36 17 5,4 ‘3’ 9 20 25 20 G1/8 G1/8 10 max. Operating Force: 54N These valves are suitable for panel mounting. Panel Hole: Ø31 mm Panel Thickness: 10 mm maximum 6/96 21 24 19 A/F 34 21 G1/8 116,5 Operating Force: 22N, pilot port ‘12’ at zero bar Reset Pressure: 2 bar minimum These valves are suitable for panel mounting by means of an optional nut and washer, reference 03 0430 00; a shrouded panel mounting kit is also available, reference 03 0429 00. Panel Hole: Ø15 mm; Panel Thickness: 5 mm maximum Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. N/** 5.6.081.25 Manual G1/8 5/2 Super ‘X’ X3 0468 02 G1/8 5/2 Button (Palm) Operated Twist Return Valve (Emergency Stop) X3 0297 02 G1/8 5/2 Button (Palm) Operated Spring Return Valve (Emergency Stop) 60,5 10 20 ‘5’ ‘1’ ‘12’ 9,8 ‘4’ ‘14’ ‘5’ ‘3’ 12 9 5,1 20 9 36 ‘2’ 22 ‘4’ ‘14’ 26,3 5 17 ‘2’ ‘1’ 20 ‘12’ 36 45 5 Travel 17 22 20 5,4 ‘3’ 20 60 20 20 87 35 38 21 137,5 G1/8 G1/8 Operating Force: 18N Valve latches when button is depressed and returns when the locking ring is rotated anti-clockwise. This valve is suitable for panel mounting. Panel Hole: Ø32,1; Panel thickness: 8mm maximum Operating Force: 70N (Return Torque: 6,8Nm) This valve is suitable for panel mounting. Panel Hole: 22,5 mm; Panel Thickness: 8 mm maximum X3 0375 02 G1/8 5/2 Button (Palm) Operated Key Return Valve X3 0296 02 G1/8 5/2 Lever Operated Lever Return Valve 60,5 20 82 10 20 5,4 9 27 17 20 ‘5’ ‘1’ ‘12’ ‘14’ ‘3’ ‘5’ 12 9 20 ‘4’ 39 20 ‘2’ ‘1’ 20 ‘12’ 22 ‘2’ R 47 ‘4’ 36 ‘14’ 22 9,8 ‘3’ 17 20 60 87 21 38 21 138 G1/8 G1/8 Operating Force: 54N Valve latches when button is depressed. To reset, turn key. This valve is suitable for panel mounting. Panel Hole: Ø32,1 mm Panel Thickness: 6 mm maximum N/** 5.6.081.26 Operating Force: 13N This valve is suitable for panel mounting. Panel Hole: 22,5 mm; Panel Thickness: 6 mm maximum Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 6/96 Manual G1/8 5/2 Super ‘X’ X3 0443 02 G1/8 5/2 Lever Operated Spring Return Valve X3 0478 02, X3 0477 02 G1/8 5/2 Lever Operated Valves 60,5 ‘5’ ‘1’ 5 max. 22 ‘12’ 36 ‘2’ 21 17 ‘4’ ‘14’ 90° 93 20 10 5,4 G1/8 ‘3’ 9 47,5 20 100 20 60,5 115 20 10 ‘2’ ‘5’ G1/8 ‘1’ 21 ‘12’ 22 ‘4’ ‘14’ 36 17 5,4 21 24 19 A/F M4x0,7 ‘3’ 9 20 20 Operating Force: 48N This valve is suitable for panel mounting. A fingertip extension is available for use on this valve, reference 07 0033 01. Panel Hole: Ø15 mm; Panel thickness: 5 mm maximum Operating Force: X3 0478 02 = 16N X3 0477 02 = 13N Both models are suitable for panel mounting by means of a bezel kit, reference 03 3437 64. Panel Hole: Ø24 mm; Panel Thickness: 8 mm maximum X3 3438 02, X3 3478 02, X3 3437 02, X3 3477 02 G1/8 5/2 Three Position Lever Operated Valves X3 0466 02 G1/8 5/2 Lever Operated Spring Return Valve 17,5 17,5 60,5 20 3 10 5,4 21 ‘14’ ‘2’ ‘5’ 30 G1/8 ‘4’ ‘1’ ‘12’ 36 17 22 94 8 ‘3’ 9 34,5 25 60,5 64 20 20 132 10 M4x0,7 20 ‘1’ 21 ‘12’ 21 ‘5’ ‘2’ 36 ‘4’ ‘14’ 22 5,4 ‘3’ G1/8 9 20 20 81 Operating Force: X3 3438 02 and X3 3478 02 = 15N X3 3437 02 and X3 3477 02 = 12N All models are suitable for panel mounting, by means of a bezel kit, reference 03 3437 64. Panel Hole: Ø24 mm; Panel Thickness: 8mm maximum 6/96 Operating Force: 31N Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. N/** 5.6.081.27 Manual G1/8 5/2 Super ‘X’ X3 0465 02 G1/8 5/2 Knob Operated Knob Return Valve X3 0464 02 G1/8 5/2 Knob Operated, Knob or Pilot Return Valve 60,5 60,5 20 10 5 max. 36 ‘3’ ‘5’ 20 20 ‘12’ ‘3’ 9 52 20 119,5 20 21 24 21 19 A/F G1/8 124,5 19 A/F 24 ‘2’ ‘1’ 5 max. 9 52 ‘4’ ‘14’ 36 ‘1’ ‘12’ 22 ‘5’ ‘2’ 22 22 ‘4’ 22 5,4 4,76 ‘14’ 20 10 17 22 5,4 4,76 G1/8 G1/8 Operating Force: 22N This valve is suitable for panel mounting by means of an optional nut and washer, reference 03 0430 00. Panel Hole: Ø15 mm Panel thickness: 5mm maximum Operating Force: 22N Reset Pressure: 2 bar minimum This valve is suitable for panel mounting by means of an optional nut and washer, reference 03 0430 00. Panel Hole: Ø15 mm Panel thickness: 5mm maximum X3 0459 02 G1/8 5/2 Rotary Knob Operated Knob Return Valve 03 0458 02 801 G1/8 5/2 Key Operated Key Return Valve 60,5 23,8 60,5 10 20 45° 17 5,4 10 20 45° 17 5,4 ‘5’ ‘2’ ‘1’ ‘12’ ‘2’ ‘1’ ‘3’ ‘12’ ‘3’ 9 20 9 20 ‘4’ ‘5’ 36 ‘14’ ‘4’ 22 ‘14’ 36 33,6 33,6 22 34,1 39,7 45° 20 45° 20 101 141 101 21 27 41,3 21 30,1 135 G1/8 G1/8 Switch shown in non-operated position. This valve is suitable for panel mounting. Panel Hole: Ø32 mm; Panel Thickness: 6 mm maximum N/** 5.6.081.28 The key is removable in both positions. Key slot shown in non-operated position. Two keys are supplied. This valve is suitable for panel mounting. Panel Hole: Ø32 mm; Panel Thickness: 6 mm maximum Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 6/96 Manual G1/8 5/2 Super ‘X’ X3 0482 02 G1/8 5/2 Pedal Operated Spring Return Valve X3 0484 02 G1/8 5/2 Pedal Operated Pedal Return Valve 187 187 71 5° 71 5° G1/8 65 G1/8 100 65 100 68 60 12 12 60 68 12 65 12 65 6,5 6,5 Operating Force: 22N A foot guard is available for this valve, reference 03 0480 60. Operating Force: 22N A foot guard is available for this valve, reference 03 0480 60. X3 0261 02 G1/8 5/2 Electrical Style Rotary Knob Operator, Rotary Knob Return Valve X3 0262 02 G1/8 5/2 Electrical Style Rotary Key Operator, Key Return Valve 1.6 min. 5 max. 48 26,3 9,8 1.6 min. 5 max. 9 25 20 ‘4’ ‘14’ ‘5’ 17 ‘2’ ‘1’ 20 ‘12’ 48 26,3 9,8 22 ‘5’ ‘3’ 20 56 17 ‘2’ ‘1’ 20 ‘12’ 22 36 ‘3’ 20 60 29,5 29,5 G1/8 G1/8 6/96 20 ‘4’ ‘14’ 36 60 Operating Torque: 6,8Nm Panel Hole: Ø22,5 mm Panel Thickness: 5 mm maximum 9 31 Operating Torque: 6,8Nm Panel Hole: Ø22,5 mm Panel Thickness: 5 mm maximum Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. N/** 5.6.081.29 Manual G1/8 5/2 Super ‘X’ X3 0263 02, X3 0264 02, X3 0265 02 G1/8 5/2 Electrical Style Push Button (Mushroom) Operator Spring Return Valve 1.6 min. 5 max. X3 0266 02, X3 0267 02, X3 0268 02 G1/8 5/2 Electrical Style Push Button (Shrouded) Operator Spring Return Valve 48 26,3 9,8 48 26,3 9,8 1.6 min. 5 max. 20 9 24 ‘4’ ‘14’ ‘5’ 17 ‘2’ ‘12’ ‘1’ 20 20 9 22 ‘4’ ‘14’ 36 ‘3’ ‘5’ 12 20 17 ‘2’ ‘1’ 20 60 ‘12’ 22 36 ‘3’ 20 29,5 35 60 G1/8 G1/8 Operating Force: 50N Panel Hole: Ø22,5 mm Panel Thickness: 5 mm maximum Operating Force: 50N Panel Hole: Ø22,5 mm Panel Thickness: 5 mm maximum X3 0269 02, X3 0270 02, X3 0271 02 G1/8 5/2 Electrical Style Push Button (Extended) Spring Return Valve X0 0272 02 G1/8 5/2 Electrical Style Button Operator Key Reset Valve 1.6 min. 5 max. 48 26,3 9,8 9 19 20 1.6 min. 5 max. 17 48 26,3 9,8 9 39 ‘4’ ‘14’ ‘5’ ‘2’ ‘1’ 20 ‘12’ 22 ‘3’ ‘5’ 20 62 60 ‘2’ ‘1’ 20 ‘12’ 22 36 ‘3’ 20 35 29,5 N/** 5.6.081.30 17 60 G1/8 Operating Force: 50N Panel Hole: Ø22,5 mm Panel Thickness: 5 mm maximum ‘4’ ‘14’ 36 20 G1/8 Operating Force: 50N Panel Hole: Ø22,5 mm Panel Thickness: 5 mm maximum Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 6/96 Manual G1/8 5/2 Super ‘X’ X3 0273 02 G1/8 5/2 Electrical Style Switch Operator Switch Return Valve 1.6 min. 5 max. 48 26,3 9,8 X3 0395 02 G1/8 5/2 Adapter Valve 5 48 26,3 9,8 9 9 22 ‘2’ ‘3’ 17 ‘2’ ‘12’ 22 36 ‘5’ ‘1’ 12 20 37,5 ‘4’ ‘14’ ‘10’ ‘12’ 20 ‘1’ 20 22 36 ‘3’ 20 60 17 29,5 G1/8 21 G1/8 19 Operating Force: 40N Panel Hole: Ø22,5 mm Panel Thickness: 5 mm maximum 6/96 This valve is for use with standard Operating Heads. For details see page 5.4.081.28. Operating Force (Including Operator): see page 5.4.081.28. Panel Hole: Ø22,5 mm; Panel thickness: 5 mm maximum Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. N/** 5.6.081.31 Manual G1/4 5/2 Super ‘X’ 03 0638 02, 03 0637 02 G1/4 3/2 Lever Operated Valves 03 0608 02 G1/4 3/2 Button Operated Pilot Return Valve 43 ‘12’ 30 ‘2’ ‘10’ ‘1’ 28 ‘3’ 40 min. 48,5 max. G1/4 30,5 6,5 11,5 11,5 22 130 max. 113 M5x0,8x17 47 134 11,5 ‘12’ G1/4 43 11,5 28 ‘1’ ‘3’ 41 47 30 52 ‘2’ ‘10’ G1/4 6,5 11,5 11,5 23,5 Operating Force: 03 0638 02 = 15N 03 0637 02 = 13N Model 03 0637 02 features a positive detent in each position. Both Models are suitable for panel mounting by means of a bezel kit, reference 03 3637 64. Panel Hole: Ø31 mm; Panel Thickness: 8 mm maximum Operating Force: 13N, pilot port ‘10’ at zero bar Reset Pressure: 2 bar minimum This valve is suitable for panel mounting and includes a nut and washer. Panel Hole: Ø21 mm; Panel thickness: 8mm maximum 03 0604 02 G1/4 3/2 Button Operated Spring Return Valve 03 0625 02 G1/4 3/2 Knob Operated Knob Return Valve 76,5 66,5 max. 43 43 11,5 ‘12’ ‘3’ 40 min. 48,5 max. 47 ‘3’ ‘1’ 7 6,5 11,5 ‘1’ 6,5 58,5 11,5 11,5 11,5 131,5 41 28 28 122 max. G1/4 G1/4 22 Operating Force: 53N This valve is suitable for panel mounting and includes a nut and washer. Panel Hole: Ø21 mm; Panel Thickness: 8 mm maximum N/** 5.6.081.32 ‘2’ ‘10’ 30 ‘2’ ‘10’ 30 ‘12’ 47 11,5 22 Operating Force: 13N This valve is suitable for panel mounting and includes a nut and washer. Panel Hole: Ø21 mm; Panel Thickness: 8 mm maximum Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 6/96 Manual G1/4 5/2 Super ‘X’ 03 0627 02 G1/4 3/2 Knob Operated, Knob or Pilot Return Valve 03 0681 02 G1/4 3/2 Pedal Operated Spring Return Valve 187 76,5 43 5° ‘3’ 7 ‘1’ 6,5 58,5 47 ‘2’ ‘10’ 30 ‘12’ 71 11,5 G1/4 31 65 11,5 11,5 22 100 65 68 12 28 60 G1/8 12 139,5 G1/4 6,5 Operating Force: 13N Reset Pressure: 4 bar minimum This valve is suitable for panel mounting and includes a nut and washer. Panel Hole: Ø21 mm; Panel Thickness: 8 mm maximum Operating Force: 22N A foot guard is available for this valve, reference 03 0480 60. 03 0683 02 G1/4 3/2 Pedal Operated Pedal Return Valve 187 71 5° G1/4 65 22 100 12 60 68 12 65 6,5 Operating Force: 22N A foot guard is available for this valve, reference 03 0480 60. 6/96 Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. N/** 5.6.081.33 Manual G1/4 5/2 Super ‘X’ X3 0644 02 G1/4 5/2 Button Operated Spring Return Valve X3 0648 02 G1/4 5/2 Button Operated Pilot Return Valve 66,5 max. 66,5 max. 65 65 11,5 11,5 23 23 6,5 ‘14’ ‘1’ ‘5’ 40 min. 23 ‘2’ ‘12’ ‘1’ ‘5’ ‘3’ 40 min. 11,5 48,5 max. ‘4’ 30 ‘2’ ‘12’ 47 ‘4’ 30 ‘14’ 23 ‘3’ 30,5 11,5 48,5 max. 23 47 6,5 23 152 max. G1/4 28 41 28 Ø41 G1/4 144 max. G1/4 22 Operating Force: 62N This valve is suitable for panel mounting and includes a nut and washer. Panel Hole: Ø21 mm; Panel Thickness: 8 mm maximum Operating Force: 13N, pilot port ‘12’ at zero bar Reset Pressure: 2 bar minimum This valve is suitable for panel mounting and includes a nut and washer. Panel Hole: Ø21 mm; Panel thickness: 8mm maximum X3 0678 02, X3 0677 02 G1/4 5/2 Lever Operated Valves X3 3638 02, X3 3678 02, X3 3637 02, X3 3677 02 G1/4 5/3 Three Position Lever Operated Valves 134 134 15 15 G1/4 65 48 M5x0,8 11,5 28 28 G1/4 22 65 48 23 M5x0,8 11,5 30 23 Ø6,5 6,5 ‘1’ ‘5’ 23,5 23 11,5 23 16 Operating Force: X3 0678 02 = 15N X3 0677 02 = 13N Model X3 0677 02 features a positive detent in each position. Both models are suitable for panel mounting by means of a bezel kit, reference 03 3637 64. Panel Hole: Ø31 mm; Panel Thickness: 8 mm maximum N/** 5.6.081.34 ‘2’ ‘12’ 30 ‘3’ ‘4’ 52 30 ‘1’ ‘5’ ‘14’ 33,5 23 47 ‘2’ ‘12’ 47 ‘4’ 52 ‘14’ ‘3’ 11,5 23 Operating Force: X3 3638 02 & X3 3678 02 models = 15N X3 3637 02 & X3 3677 02 models = 12N These valves are suitable for panel mounting by means of a bezel kit, reference 03 3637 64. Panel Hole: Ø31 mm Panel Thickness: 8 mm maximum Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 6/96 Manual G1/4 5/2 Super ‘X’ X3 0665 02 G1/4 5/2 Knob Operated Knob Return Valve X3 0682 02 G1/4 5/2 Pedal Operated Spring Return Valve 187 76,5 65 11,5 5° 23 71 6,5 ‘2’ ‘12’ ‘1’ ‘5’ 47 ‘4’ 30 ‘14’ ‘3’ G1/4 7 65 11,5 58,5 65 23 12 23 22 100 28 68 60 154 G1/4 12 22 Operating Force: 13N This valve is suitable for panel mounting and includes a nut and washer. Panel Hole: Ø21 mm; Panel Thickness: 8 mm maximum 6,5 Operating Force: 22N A foot guard is available for this valve, reference 03 0480 60 X3 0684 02 G1/4 5/2 Pedal Operated Pedal Return Valve 187 71 5° G1/4 65 22 100 12 68 60 12 65 6,5 Operating Force: 22N A foot guard is available for this valve, reference 03 0480 60 6/96 Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. N/** 5.6.081.35 Super ‘X’ Operating Heads Operating Heads for use with G1/8 5/2 and 3/2 Adapter Valves M/P 34840/* Button (Palm) Operated, Spring Return 1,5 min 6 max 29,5 29,5 Operating Force: 50N IP 65 Protection Panel mounted Ø22,5 mm hole Operating Force: 50N Panel Hole: Ø22,5 mm Panel Thickness: 6 mm maximum M/P 34842/* Button (Mushroom) Operated, Spring Return M/P 34682 Button Operated, Key Reset (Emergency Stop) 24 1,5 min 6 max 39 35 M22 x 1,5 35 M22 x 1,5 1,5 min 6 max 12 M22 x 1,5 19 M22 x 1,5 1,5 min 6 max M/P34841/* Button (Shrouded) Operated, Spring Return Operating Force: 50N Panel Hole: Ø22,5 mm Panel Thickness: 6 mm maximum 62 Operating Force: 50N Panel Hole: Ø22,5 mm Panel Thickness: 6 mm maximum M/P 34846 Switch Operated Switch Return 1,5 min 6 max M/P 34845 Key Operated Key Return 22 31 29,5 M22 x 1,5 29,5 M22 x 1,5 1,5 min 6 max Operating Force: 40N Panel Hole: Ø22,5 mm Panel Thickness: 6 mm maximum 56 M/P 34843 Rotary Knob Operated Rotary Knob Return Operating Force: 6,8N Panel Hole: Ø22,5 mm Panel Thickness: 6 mm maximum N/** 5.6.081.36 Operator Type Button (Palm)/Spring Momentary Action Button (Shrouded)/Spring Momentary Action Button (Mushroom)/Spring Momentary Action Emergency Stop Button/Key Switch/Switch Rotary Knob/Rotary Knob Key/Key Maintained Action Maintained Action Maintained Action Maintained Action 29,5 25 M22 x 1,5 1,5 min 6 max Operating Force: 6,8N Panel Hole: Ø22,5 mm Panel Thickness: 6 mm maximum Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. Colour Red Green Black Red Green Black Red Green Black Red - Model No. M/P 34840/R M/P 34840/G M/P 34840/N M/P 34841/R M/P 34841/G M/P 34841/N M/P 34842/R M/P 34842/G M/P 34842/N M/P 34862 M/P 34846 M/P 34843 M/P 34845 6/96