Preliminary Data Sheet – Subject to Change 30 GBd Fiber-Optic Link for High-Volume, Short-Range Applications Preliminary HFBR-712BP, Transmitter HFBR-722BP, Receiver Features • Aggregate capacity up to 30 GBd. Highest data rate per board edge inch. • Convection Reflow Compatible 72-pin BGA Package 12 independent channels 1 to 2.5 GBd per channel Separate Transmitter and Receiver packages • • • • • • Control I/O is compatible with LVTTL and LVCMOS • Standard MTP(MPO) ribbon fiber connector interface 3.3 volt Power Supply • Applications • Distance up to 300m with Revised IEC eye safety in 50/125 500MHz·km fiber and 600m with 2200MHz·km fiber Internal Telecom and Datacom Switch/Router Connections • Multi-Processor Computer Internal Connections Data I/O is CML compatible with external coupling capacitors • Low Cost SONET/SDH VSR OC192/STM64 Connections Preliminary Product Disclaimer This preliminary data sheet is provided to assist you in the evaluation of engineering samples of the product that is under development and targeted for release during 2001. Until Agilent Technologies releases this product for general sales, Agilent reserves the right to alter prices, specification, features, capabilities, function, manufacturing release dates, and even general availability of the product at any time. Preliminary Data Sheet – Subject to Change Recommended Operating Conditions Parameter Min Typ 80°C Case Temperature Supply Voltage Data Input Differential Peak-to-Peak Voltage Swing Receiver Data Output Load (Differential) Max 3.135 V 3.3 V 175 mV 3.465 V 1400 mV 100 Ω Receiver Electrical Characteristics Parameter Min Supply Current Power Dissipation Data Output Differential Peak-to-Peak Voltage Swing Data Output Rise/Fall Time Typ Max TBD 650 mA TBD 2.25 W 600 mV 650 mV 120 ps 150 ps Typ Max Supply Current TBD 680 mA Power Dissipation TBD 2.4 W 450 mV Transmitter Electrical Characteristics Parameter Min 100 Ω Differential Input Impedance Receiver Optical Characteristics Parameter Min Typ Input Optical Power - Sensitivity Max -16 dBm Input Optical Power - Saturation -3 dBm Operating Center Wavelength 830 nm 860 nm Transmitter Optical Characteristics Parameter Output Optical Power 50/125 µm, Fiber NA = 0.2 Extinction Ratio Center Wavelength Spectral Width - rms Min Typ -8 dBm Max -3 dBm 7 dB 830 nm 850 nm 860 nm 0.85 nm