Agilent HSMx-A10x-xxxxx PLCC-2 Surface Mount LED Indicator Data Sheet Features • Industry standard PLCC-2 package • High reliability LED package • High brightness using AlInGaP and InGaN dice technologies Description This family of SMT LEDs is packaged in the industry standard PLCC-2 package. These SMT LEDs have high reliability performance and are designed to work under a wide range of environmental conditions. This high reliability feature makes them ideally suited to be used under harsh interior automotive as well as interior signs application conditions. To facilitate easy pick & place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel will be shipped in single intensity and color bin, except red color, to provide close uniformity. • Available in full selection of colors These LEDs are compatible with IR solder reflow process. Due to the high reliability feature of these products, they can also be mounted using through-the-wave soldering process. • Super wide viewing angle at 120˚ The super wide viewing angle at 120˚ makes these LEDs ideally suited for panel, push button, or general backlighting in automotive interior, office equipment, industrial equipment, and home appliances. The flat top emitting surface makes it easy for these LEDs to mate with light pipes. With the built-in reflector pushing up the intensity of the light output, these LEDs are also suitable to be used as LED pixels in interior electronic signs. Applications • Available in 8 mm carrier tape on 7 inch reel • Compatible with both IR and TTW soldering process • Interior automotive –Instrument panel backlighting –Central console backlighting –Cabin backlighting • Electronic signs and signals –Interior full color sign –Variable message sign • Office automation, home appliances, industrial equipment –Front panel backlighting –Push button backlighting –Display backlighting CAUTION: HSMN-, HSMM-, and HSMK-A10x-xxxxx LEDs are Class 2 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Agilent Application Note AN-1142 for additional details. Package Dimensions 2.8 ± 0.2 1.9 ± 0.2 2.2 ± 0.2 0.1 TYP. 3.2 ± 0.2 0.8 ± 0.1 3.5 ± 0.2 0.8 ± 0.3 0.5 ± 0.1 CATHODE MARKING (ANODE MARKING FOR AlGaAs DEVICES) NOTE: ALL DIMENSIONS IN MM. Device Selection Guide Color Red Red Orange Orange Amber Yellow Green Emerald Green Green Cyan Blue Part Number HSMS-A100-J00J1 HSMH-A100-L00J1 HSMC-A100-Q00J1 HSMC-A101-S00J1 HSMZ-A100-R00J1 HSMJ-A100-Q00J1 HSMJ-A101-S00J1 HSMV-A100-R00J1 HSMD-A100-J00J1 HSML-A100-Q00J1 HSML-A101-T00J1 HSMY-A100-J00J1 HSMA-A100-Q00J1 HSMA-A101-T00J1 HSMU-A100-R00J1 HSMG-A100-J02J1 HSMG-A100-H01J1 HSMM-A100-S00J1 HSMM-A101-R00J1 HSMK-A100-S00J1 HSMK-A101-R00J1 HSMB-A100-J00J1 HSMN-A101-N00J1 HSMN-A100-P00J1 Min. Iv @ 20 mA 4 10 63 160 100 63 160 100 4 63 250 4 63 250 100 4 2.5 160 100 160 100 4 25 40 Typical Iv @ 20 mA 15 50 100 240 400 200 240 350 15 160 330 12 100 330 270 18 8 280 200 280 170 15 50 70 Dice Technology GaP AS AlGaAs AS AlInGaP AS AlInGaP TS AlInGaP AS AlInGaP AS AlInGaP TS AlInGaP GaP AS AlInGaP AS AlInGaP GaP AS AlInGaP AS AlInGaP TS AlInGaP GaP GaP InGaN InGaN InGaN InGaN GaN InGaN InGaN Note: 1. The luminous intensity, I v, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. 2 Part Numbering System HSM x 1 - A x2 x 3 x 4 - x 5 x6 x 7 x 8x 9 Packaging Option Color Bin Selection Intensity Bin Select Device Specific Configuration Package Type LED Chip Color Absolute Maximum Ratings at TA = 25˚C Parameters DC Forward Current[1] Peak Forward Current[2] Power Dissipation Reverse Voltage Junction Temperature Operating Temperature Storage Temperature GaP 30 mA 100 mA 63 mW 5V 110˚C –55˚C to +100˚C –55˚C to +100˚C AlGaAs 30 mA 100 mA 60 mW 5V 110˚C –55˚C to +100˚C –55˚C to +100˚C AS AlInGaP 30 mA[3,4] 100 mA 63 mW 5V 110˚C –55˚C to +100˚C –55˚C to +100˚C Notes: 1. Derate linearly as shown in Figure 4. 2. Duty factor = 10%, Frequency = 1 kHz. 3. Drive current between 10 mA and 30 mA is recommended for best long term performance. 4. Operation at current below 5 mA is not recommended. 3 TS AlInGaP 30 mA[3,4] 100 mA 72 mW 5V 110˚C –55˚C to +100˚C –55˚C to +100˚C GaN/InGaN 30 mA 100 mA 114 mW 5V 110˚C –55˚C to +100˚C –55˚C to +100˚C Optical Characteristics at TA = 25˚C Color Red Part Number HSMS-A100 HSMH-A100 HSMC-A10x HSMZ-A100 Red Orange HSMJ-A10x HSMV-A100 Orange HSMD-A100 HSML-A10x Amber HSMY-A100 HSMA-A10x HSMU-A100 Yellow Green HSMG-A100 Emerald Green HSMG-A100 Green HSMM-A10x Cyan HSMK-A10x Blue HSMB-A100 HSMN-A10x Dice Technology GaP AS AlGaAs AS AlInGaP TS AlInGaP AS AlInGaP TS AlInGaP GaP AS AlInGaP GaP AS AlInGaP TS AlInGaP GaP GaP InGaN InGaN GaN InGaN Peak Wavelength λpeak (nm) Typ. 635 645 635 639 621 623 600 609 583 592 594 565 558 523 502 428 468 Dominant Wavelength λD (nm) Typ. 626 637 626 630 615 617 602 605 585 590 592 569 560 525 505 462 470 Viewing Angle 2 θ1/2 (Degrees) Typ. 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 Luminous Efficacy ηv[5] (lm/w) Typ. 120 63 150 155 240 263 380 320 520 480 500 590 650 500 300 65 75 Luminous Intensity/ Total Flux Iv(mcd)/φv(mlm) Typ. 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 Notes: 1. The dominant wavelength, λD, is derived from the CIE Chromaticity Diagram and represents the color of the device. 2. θ 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 3. Radiant intensity, Ie in watts/steradian, may be calculated from the equation Ie = Iv/ηv, where Iv is the luminous intensity in candelas and ηv is the luminous efficacy in lumens/watt. Electrical Characteristics at T A = 25˚C Dice Technology GaP AS AlGaAs AS AlInGaP TS AlInGaP GaN InGaN 4 Forward Voltage VF (Volts) @ I F = 20 mA Typ. Max. 2.2 2.6 1.9 2.6 1.9 2.4 2.2 2.6 3.9 4.3 3.5 4.3 Reverse Voltage V R @ 100 µA Min. 5 5 5 5 — — Reverse Voltage VR @ 10 µA Min. — — — — 5 5 1.0 GREEN RELATIVE INTENSITY CYAN AlInGaP AMBER AlInGaP RED ORANGE 0.8 BLUE 0.6 0.4 AlInGaP RED AlGaAs RED 0.2 0 380 480 430 530 580 680 630 730 780 WAVELENGTH – nm RELATIVE INTENSITY 1.0 GaP EMERALD GREEN 0.8 GaP YELLOW GREEN 0.6 GaP YELLOW GaP ORANGE GaN BLUE 0.4 GaP RED 0.2 0 380 480 430 530 580 680 630 730 780 WAVELENGTH – nm Figure 1. Relative intensity vs. wavelength. GaP TS AlInGaP 25 20 InGaN AlGaAs 15 AS AlInGaP GaN BLUE 5 0 0 1 2 3 4 5 FORWARD VOLTAGE – V Figure 2. Forward current vs. forward voltage. 5 1.6 Gap 30 AlInGaP AlGaAs 1.4 InGaN 1.2 GaN 1.0 0.8 0.6 CURRENT – mA RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) FORWARD CURRENT – mA 30 10 35 1.8 35 25 TS AlInGaP/ GaP AlGaAs AS AlInGaP 20 InGaN/GaN 15 10 0.4 5 0.2 0 0 0 5 10 15 20 25 30 DC FORWARD CURRENT – mA Figure 3. Relative intensity vs. forward current. 35 0 20 40 60 80 100 TEMPERATURE – °C Figure 4. Maximum forward current vs. ambient temperature. Derated based on TJMAX = 110˚C, R θ JA = 500˚/W. 120 1.0 530 NORMALIZED INTENSITY DOMINANT WAVELENGTH – nm 540 GREEN 520 510 CYAN 500 490 480 BLUE 470 460 0 5 10 15 20 25 30 0.8 0.6 0.4 0.2 0 -90 -80 -70 -60 -50 -40 -30 -20 -10 35 CURRENT – mA 0 10 20 30 40 50 60 70 80 90 ANGULAR DISPLACEMENT – DEGREES Figure 5. Dominant wavelength vs. forward current – InGaN devices. Figure 6. Radiation Pattern. 4.50 1.50 TEMPERATURE 20 SEC. MAX. 240°C MAX. 3°C/SEC. MAX. 100-150°C 183°C –6°C/SEC. MAX. 3°C/SEC. MAX. 2.60 120 SEC. MAX. 60-150 SEC. TIME Figure 7. Recommended reflow soldering profile. TEMPERATURE 10-40 SEC. 240-245°C PRE-HEAT 120-180°C ABOVE 183°C 6°C/SEC. MAX. 2-3°C/SEC. TIME Figure 7a. Recommended wave soldering profile. 6 SOLDER RESIST Figure 8. Recommended soldering pad pattern. TRAILER COMPONENT LEADER 480 mm MIN. FOR ∅180 REEL. 960 mm MIN. FOR ∅330 REEL. 200 mm MIN. FOR ∅180 REEL. 200 mm MIN. FOR ∅330 REEL. C A USER FEED DIRECTION Figure 9. Tape leader and trailer dimension. 4 ± 0.1 4 ± 0.1 2 ± 0.05 2.29 ± 0.1 1.75 ± 0.1 +0.1 ∅1.5 –0 C 3.5 ± 0.05 +0.3 8 –0.1 3.81 ± 0.1 A 3.05 ± 0.1 +0.1 ∅1 –0 8° 0.229 ± 0.01 Figure 10. Tape dimension. 7 2 +0.5 –0 Ø 20.5 ± 0.3 62.5 180 +0 –2.5 Ø 13 ± 0.2 8.4 +1.50 (MEASURED AT OUTER EDGE) –0.00 14.4 (MAX. MEASURED AT HUB) LABEL AREA (111 mm x 57 mm) WITH DEPRESSION (0.25 mm) 7.9 (MIN.) 10.9 (MAX.) Figure 11. Reel dimension. USER FEED DIRECTION CATHODE SIDE PRINTED LABEL Figure 12. Reeling orientation. 8 Baking is required under the following conditions: a) the humidity indicator turns pink b) the pack has been opened for more than four weeks. Baking recommended condition: 60 ± 5˚C for 20 hours. This product is qualified as Moisture Sensitive JEDEC Level 2A. Intensity Bin Select (X5X6 ) Individual reel will contain parts from one half bin only. Color Bin Select (X 7) Individual reel will contain parts from one full bin only. X5 X7 0 Z Y W V U T S Q P N M L K 1 2 X6 0 3 4 5 7 8 9 Min Iv Bin Full Distribution 3 half bins starting from X51 4 half bins starting from X51 5 half bins starting from X51 3 half bins starting from X52 4 half bins starting from X52 5 half bins starting from X52 Intensity Bin Limits Bin ID G1 G2 H1 H2 J1 J2 K1 K2 L1 L2 M1 M2 N1 N2 P1 P2 Q1 Q2 R1 R2 S1 S2 T1 T2 U1 U2 V1 V2 Min. (mcd) 1.80 2.24 2.80 3.55 4.50 5.60 7.20 9.00 11.20 14.00 18.00 22.40 28.50 35.50 45.00 56.00 71.50 90.00 112.50 140.00 180.00 224.00 285.00 355.00 450.00 560.00 715.00 900.00 Max. (mcd) 2.24 2.80 3.55 4.50 5.60 7.20 9.00 11.20 14.00 18.00 22.40 28.50 35.50 45.00 56.00 71.50 90.00 112.50 140.00 180.00 224.00 285.00 355.00 450.00 560.00 715.00 900.00 1125.00 Tolerance of each bin limit = ± 12%. 9 Full Distribution A and B only B and C only C and D only D and E only E and F only F and G only G and H only A, B, and C only B, C, and D only C, D, and E only D, E, and F only E, F, and G only F, G, and H only A, B, C, and D only E, F, G, and H only Color Bin Limits Blue A B C D Min. (nm) 460.0 465.0 470.0 475.0 Max. (nm) 465.0 470.0 475.0 480.0 Green A B C D Min. (nm) 515.0 520.0 525.0 530.0 Max. (nm) 520.0 525.0 530.0 535.0 Cyan A B C D Min. (nm) 490.0 495.0 500.0 505.0 Max. (nm) 495.0 500.0 505.0 510.0 Color Bin Limits Emerald Green A B C D Min. (nm) 552.5 555.5 558.5 561.5 Max. (nm) 555.5 558.5 561.5 564.5 Yellow Green E F G H Min. (nm) 564.5 567.5 570.5 573.5 Max. (nm) 567.5 570.5 573.5 576.5 Amber A B C D E F Min. (nm) 582.0 584.5 587.0 589.5 592.0 594.5 Max. (nm) 584.5 587.0 589.5 592.0 594.5 597.0 Orange A B C D E Min. (nm) 597.0 600.0 603.0 606.0 609.0 Max. (nm) 600.0 603.0 606.0 609.0 612.0 Red Orange Min. (nm) A 611.0 B 616.0 Max. (nm) 616.0 620.0 Red Min. (nm) Full Distribution Max. (nm) Tolerance of each bin limit = ± 1 nm. X8X9 J1 20 mA test current, Top Mount, 7 inch Reel J2 10 mA test current, Top Mount, 7 inch Reel www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (408) 654-8675 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6271 2451 India, Australia, New Zealand: (+65) 6271 2394 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 6271 2194 Malaysia, Singapore: (+65) 6271 2054 Taiwan: (+65) 6271 2654 Data subject to change. Copyright © 2002 Agilent Technologies, Inc. Obsoletes 5988-6183EN April 16, 2002 5988-6546EN