13-Dec.-2012 Ver.1.0 Preliminary & Confidential WYSBMVGXB TAIYO YUDEN Bluetooth®+Wireless LAN Module Bluetooth® 3.0, 2.1+EDR IEEE802.11a/b/g/n WYSBMVGXB Brief Data Report The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TAIYO YUDEN CO., LTD. is under license. TAIYO YUDEN 1/11 13-Dec.-2012 Ver.1.0 Preliminary & Confidential WYSBMVGXB TAIYO YUDEN Document constituent list Control name Document Page General Items Absolute maximum ratings Electrical characteristics Circuit schematic Outline / Appearance Pin Layout 1/1 1/1 1/2 - 2/2 1/1 1/1 1/3 - 3/3 Rev. record 13-Dec-2012> Ver.1.0 Initial Release TAIYO YUDEN 2/11 13-Dec.-2012 Ver.1.0 Preliminary & Confidential WYSBMVGXB TAIYO YUDEN Control No. Control name HD-AG-A100041 (1/1) General Items Scope This specification (“Specification”) applies to the hybrid IC for use Wireless LAN , Bluetooth® (“Product”) manufacture by TAIYO YUDEN Co., Ltd. (“TAIYO YUDEN”) 1. Part Number: WYSBMVGXB 2. Function: Radio frequency transceiver Module (IEEE802.11abgn standard conformity) (Bluetooth® 3.0, 2.1+EDR standard conformity) 3. Application: Hand Held Device 4. RoHS Directive (2002/95/EC).comply 5. MSL : Level 3 6. Outline: 77-pin leadless chip carrier 7. Marking: Part Number, Lot Number 8. Features: -IEEE802.11abgn standard conformity -Bluetooth® 3.0, 2.1+EDR (QDID: B017555) Interface: SDIO, PCM Embedded MPU for reducing loads on host processor Built-in EEPROM 9. WLAN Channel Supported: 1~13ch in 11bgn mode , W52/W53/W56 in 11an mode 10.WLAN Data Rate Supported: 1/2/5.5/11 Mbps in 11b mode 6/9/12/18/24/36/48/54 Mbps in 11ag mode MCS0~MCS7 (HT20/HT40) in 11n mode 11.Host Interface: SDIO (4bits), upto 50MHz 12.Security: WEP (64/128), AES, TKIP,WPA/WPA2,WAPI 13.Packing: Packaging method: Tape and Reel Packaging unit: 1500pcs/reel TAIYO YUDEN 3/11 13-Dec.-2012 Ver.1.0 Preliminary & Confidential WYSBMVGXB TAIYO YUDEN Control No. HD-AM-A100041 (1/1) Control name Absolute maximum ratings Absolute maximum ratings Item Symbol Rating Min. Typ. Max. Unit Remark Supply voltage 1 VIO - - 4.0 V Supply voltage 2 VDD18 - - 1.98 V Supply voltage 3 VBAT - - 5.6 V Storage temperature range Tstg -30 - 100 Degrees C Operation temperature range Topr -20 25 70 Degrees C Recommended operating range Item Symbol Rating Min. Typ. Max. Unit Supply voltage 1 VIO 1.62/2.97 1.8/3.3 1.98/3.63 V Supply voltage 2 VDD18 1.71 1.8 1.89 V Supply voltage 3 VBAT 3.2 3.3 4.3 V TAIYO YUDEN Remark 4/11 13-Dec.-2012 Ver.1.0 Preliminary & Confidential WYSBMVGXB TAIYO YUDEN Control No. HD-AE-A100041 Control name Electrical characteristics (1/2) SDIO Interface Specifications The Specification applies for Topr.= -20 to 70 degrees C , Supply voltage=Typical voltage Parameter Symbol Condition Min Typ Max Normal 0 - 25 High Speed 0 - 50 Normal 10 - - High Speed 7 - - Normal 10 - - High Speed 7 - - Normal 5 - - High Speed 6 - - Normal 5 - - High Speed 2 - - - - 14 ns 2.5 - - ns 1 Input SDIO_CLK Frequency Tf 2 Input SDIO_CLK High Time Tch 3 Input SDIO_CLK Tcl 4 Input SDIO_CMD, DATA[3:0] Setup time Tsu 5 Input SDIO_CMD, DATA[3:0] Hold time Thd 6 Output SDIO_CMD, DATA[3:0] Delay time Tod - 7 Output SDIO_CMD, DATA[3:0] Hold time Toh High Speed Low Time Normal Mode Unit Remark MHz ns ns ns ns Tf SD_CLK Tch HOST > WiFi Tsu Tcl Thd SD_CMD SD_DATA[3:0] WiFi > HOST Tod SD_CMD SD_DATA[3:0] Tf High Speed Mode SD_CLK Tch HOST > WiFi Tsu Tcl Thd SD_CMD SD_DATA[3:0] Toh WiFi > HOST Tod SD_CMD SD_DATA[3:0] TAIYO YUDEN 5/11 13-Dec.-2012 Ver.1.0 Preliminary & Confidential WYSBMVGXB Control No. HD-AE-A100041 TAIYO YUDEN (2/2) Control name Electrical characteristics WLAN RF Specification 11b(11Mbps) 11g(54Mbps) 11a (54Mbps) Tx Rx Tx Rx Tx Rx Condition Value 16 -87 15 -74 14 -75 Unit dBm dBm dBm dBm dBm dBm Condition Power Sensitivity Value 8 -86 Unit dBm dBm Condition 11b / 11Mbps 11b / 11Mbps Basic Rate Deep Sleep Value 520 230 50 3.0 Unit mW mW mW mW Power Sensitivity Power Sensitivity Power Sensitivity BT RF Specification Basic Rate Tx Rx Power Consumption WLAN Tx WLAN Rx BT Low Power TAIYO YUDEN 6/11 13-Dec.-2012 Ver.1.0 Preliminary & Confidential WYSBMVGXB Control No. HD-MC-A100041 TAIYO YUDEN (1/1) Control name Circuit Schematic Block Diagram TAIYO YUDEN 7/11 13-Dec.-2012 Ver.1.0 Preliminary & Confidential WYSBMVGXB TAIYO YUDEN Control No. HD-AD-A100041 Control name Outline/Appearance (1/1) OUTLINE Unit: mm 13.1+/-0.2 1.35Max A B C D E F G H J K L M N 1 2 3 4 5 6 Bottom View TAIYO YUDEN 8/11 13-Dec.-2012 Ver.1.0 Preliminary & Confidential WYSBMVGXB TAIYO YUDEN Control No. HD-BA-A100041 (1/3) Control name Pin Layout Pin Descriptions Loc. Pin Name I/O Pwr Domain Description A1 GND - - ground A2 GND - - ground A3 ANT I/O - 2G/5G RF (WiFi-11abgn, BT) Antenna A4 GND - - ground A5 GND - - ground A6 GND - - ground B1 TDO O VIO JTAG Test Data Output B3 GND - - ground B4 GND - - ground B5 GND - - ground B6 GND - - ground C1 TDI I VIO JTAG Test Data Input C2 TCK I VIO JTAG Test Clock Input C3 RES - - (Reserved) C4 RES - - (Reserved) C5 VBAT I VBAT Battery power supply C6 VBAT I VBAT Battery power supply D1 RESETn I VIO Reset D2 TMS I VIO JTAG Controller Select D3 RES - - (Reserved) D4 RES - - (Reserved) D5 UART_CTS I VIO UART_CTSN D6 UART_SIN I VIO UART_SIN E1 PDn I VIO Power Down E2 HM I - Host I/F Select E3 GND - - ground E4 GND - - ground E5 UART_SOUT O VIO UART_SOUT E6 UART_RTS O VIO UART_RTSN F1 VDD18 I VDD18 1.8V power supply F2 VDD18 I VDD18 1.8V power supply F3 GND - - ground F4 GND - - ground F5 RES - - (Reserved) F6 VDD18 I VDD18 1.8V power supply TAIYO YUDEN 9/11 13-Dec.-2012 Ver.1.0 Preliminary & Confidential WYSBMVGXB TAIYO YUDEN Control No. HD-BA-A100041 (2/3) I/O Pwr Domain Control name Pin Layout Loc. Pin Name Description G1 GND - - ground G2 RES - - (Reserved) G3 GND - - ground G4 GND - - ground G5 GPIO0 I/O VIO GPIO0 G6 GND - - ground H1 RES - - (Reserved) H2 GPIO4 I/O VIO GPIO4 H3 GND - - ground H4 PCM_MCLK O VIO PCM_MCLK H5 GND - - ground H6 REF_CLK I VDD18 Reference Clock Input J1 RES - - (Reserved) J2 RES - - (Reserved) J3 GND - - Ground J4 PCM_DIN I VIO PCM_DIN J5 GND - - ground J6 RES - - (Reserved) K1 RES - - (Reserved) K2 RES - - (Reserved) K3 PCM_DOUT O VIO PCM_DOUT K4 PCM_SYNC I/O VIO PCM_SYNC K5 VBAT I VBAT Battery power supply K6 GND - - Ground L1 GND - - Ground L2 RES - - (Reserved) L3 RES - - (Reserved) L4 PCM_CLK I/O VIO PCM_CLK L5 LDO30_OUT O LDO30 3.0V Voltage Output L6 VDD30 I VDD30 3.0/3.3V Digital IO Power Supply M1 SLP_CLK I VDD18 Sleep Clock Input M2 RES - - (Reserved) M3 SD_CMD I/O VIO SDIO Command M4 SD_DATA[0] I/O VIO SDIO Data[0] M5 WL_HOST_WKUP O VIO WLAN -> Host Wake up M6 VIO I VIO 1.8V/3.3V Digital IO Power Supply TAIYO YUDEN 10/11 13-Dec.-2012 Ver.1.0 Preliminary & Confidential WYSBMVGXB TAIYO YUDEN Control No. HD-BA-A100041 Loc. Pin Name (3/3) I/O Pwr Domain Control name Pin Layout Description N1 GND - - Ground N2 SD_DATA[2] I/O VIO SDIO Data[2] N3 SD_DATA[3] I/O VIO SDIO Data[3] N4 SD_CLK I VIO SDIO Clock N5 SD_DATA[1] I/O VIO SDIO Data[1] N6 GND - - ground TAIYO YUDEN 11/11