2 Year Warranty POWERSTAX FP Series 1000W & 600W Power Factor Correction Modules Outline Product Specification General Specifications FEATURES APC-FP06 Parameter High Efficiency of >95% Unit Min Conforming to IEC-1000-3-2 Standard “full brick” package (116.8 x 61 x 12.7mm) APC-FP10 Conditions Typ Max Min 116.0 116.0 mm Width 61 61 mm Height 12.7 12.7 mm Thermal resistance Base to heatsink, fitted with thermal pad 0.1 0.1 °C/W Weight (Approx) 170 170 gms Parameter Conditions APC-FP06 APC-FP10 Unit Overtemperature Shutdown Typical Power Factor of 0.99 Max Length 1,000W and 600W versions Voltage input range 85Vrms - 264Vrms Typ Min Typ Max Min Typ Max 100 105 110 100 105 110 ºC Isolation voltage (to base) Complies with basic insulation requirements Isolation capacitance to base 800 800 pF Isolation resistance to base 100M 100M Ohms Agency approvals CE (LVD) , others per customer requirement 1500 1500 Vrms External synchronisation facility Enable Signal for downstream Absolute Maximum Ratings converters APC-FP06 Parameter Unit Min Operating Temperature -25°C to +100°C Thermal protection & Inrush Current Limiting q Overvoltage Protection DC OK signal provides early warning of mains failure APC-FP10 Conditions Inpuit voltage Typ 0 Input voltage Max Min 264 0 Typ 300 < 1 sec Max 264 Vrms 300 Vrms SYNC to -Vout -1.2 7 -1.2 7 V ENABLE to -Vout -0.3 16 -0.3 16 V +Vout to -Vout -0.5 425 -0.5 425 V DC OK to -Vout -0.3 16 -0.3 16 V Vaux to -Vout -0.3 16 -0.3 16 Isolation voltage (to base) 1500 1500 Storage temperature -40 125 -40 125 °C Operating temperature -40 100 -40 100 °C Pin soldering temperature < 5 sec wave solder 260 260 °C Pin soldering temperature < 7 sec hand solder 390 390 °C Range Model Reference Input Voltage (V) Output Voltage (V) Output Power (W) FP10-230-C38 FP06-110-C38 230Vac 110/230Vac V Vrms 380Vdc 380Vdc 1,000 600 FULL Approval information upon request. Website: www.w ellking.com E-mail: [email protected] 伟健电子西安 伟健电子上海 伟健电子北京 WELLKING HK LTD 伟健电子南京 伟健电子深圳 伟健电子武汉 电话：029-85269988 电话：021-64325859 电话：010-51669986 电话：025-84799815 电话： 0755-83667084 电话：027-87322626 电话：（852）28541167 传真：029-85262728 传真：021-64325860 传真：010-58895150 传真：025-84799815 传真： 0755-83668675 传真：027-87322727 传真：（852）28541167 POWERSTAX FP Series1000W & 600W Power Factor Correction Modules Outline Product Specification General Specifications FP10 APC-FP10 FP06 APC-FP06 Parameter Conditions Unit Min Operating input voltage Typ 85 Input surge Limiting Max Min 264 170 Typ 20 110Vrms 6.2 230Vrms 2.9 Max 264 Vrms 20 A Operating input current Output voltage setpoint Arms 372.4 230Vrms, full load 380 Output OVP setpoint Output current 387.6 4.9 372.4 380 425 At 100°C baseplate temperature 0 Switching Frequency 1.58 0 150 150 110V Nominal input, 25ºC base 90 - 230V Nominal input, 25ºC base 95 95 387.6 V 2.63 A KHz Efficiency % FP06 APC-FP06 Parameter APC-FP10 FP10 Conditions Min Typ Max Min Typ Undervoltage turn-on Increasing input voltage 85 170 Undervoltage turn-off Decreasing input voltage 78 156 Synchronisation Frequency 165 180 165 Max Min FP06 APC-FP06 Parameter Line regulation & Load regulation Unit Max Vrms Vrms 180 APC-FP10 (max powerde-rated de-rated atat6.7W/V from FP10 (max power 6.7WV 200V input toinput 800W to at 170Vrms) from 200V 800W at 170Vrms) APC-FP06 (max power de-rated at 6.7W/V from FP06 (max power de-rated at 6.7WV 100V input to 500W at 85Vrms) from 100V input to 500W at 85Vrms) Low to high input voltage, and KHz FP10 APC-FP10 Conditions Unit Min Output Power V 425 Typ Typ 0 Max 1000 W 0 600 370 400 370 400 V 15 V p-p 10% load to full load Ripple 6 1000uF load capacitor 10 10 Vout rising 360 360 Vout falling 225 225 Vout rising 360 360 Vout falling 350 350 Enable Threshold V DC OK Threshold V Vaux output 13.5 Vaux current 0 14.5 15.5 13.5 10 0 14.5 15.5 V 10 mA Note: This power module can be used in a wide variety of applications. To preserve maximum flexibility, internal fusing is not included. However, to achieve maximum safety and system protection, an inline fuse must be used. The safety agencies require a normal-blow, DC fuse with a maximum rating of 20A. The same type fuse with a lower rating can be used in practice. Mechanical Outline Website: www.w ellking.com E-mail: [email protected] 伟健电子西安 伟健电子上海 伟健电子北京 WELLKING HK LTD 伟健电子南京 伟健电子深圳 伟健电子武汉 电话：029-85269988 电话：021-64325859 电话：010-51669986 电话：025-84799815 电话： 0755-83667084 电话：027-87322626 电话：（852）28541167 传真：029-85262728 传真：021-64325860 传真：010-58895150 传真：025-84799815 传真： 0755-83668675 传真：027-87322727 传真：（852）28541167