S3PHBD70, S3PHB70, S3PFB70 Three Phase Half Controlled Bridge Modules/Full Controlled Bridge Dimensions in mm (1mm=0.0394") S3PHB70 S3PHBD70 Type S3PHB70G08 S3PHB70G12 S3PHB70G14 S3PHB70G16 S3PHBD70G08 S3PHBD70G12 S3PHBD70G14 S3PHBD70G16 Symbol S3PFB70G08 S3PFB70G12 S3PFB70G14 S3PFB70G16 S3PFB70 VRSM V 900 1300 1500 1700 Test Conditions o Idav Tc=85 C, module Idavm module IFRMS,ITRMS per leg IFSM,ITSM 2 It (di/dt)cr (dv/dt)cr PGM Md Weight Maximum Ratings Unit 70 70 36 A TVJ=45oC VR=0 TVJ=TVJM VR=0 t=10ms (50Hz), sine t=8.3ms (60Hz), sine t=10ms(50Hz), sine t=8.3ms(60Hz), sine 550 600 500 550 A TVJ=45oC VR=0 TVJ=TVJM VR=0 t=10ms (50Hz), sine t=8.3ms (60Hz), sine t=10ms(50Hz), sine t=8.3ms(60Hz), sine 1520 1520 1250 1250 A2s TVJ=125oC f=50Hz, tp=200us VD=2/3VDRM IG=0.3A diG/dt=0.3A/us repetitive, IT=50A 150 . non repetitive, IT=1/2 Idav TVJ=TVJM; VDR=2/3VDRM RGK= ; method 1 (linear voltage rise) TVJ=TVJM IT=ITAVM tp=30us tp=500us tp = 10ms A/us 500 1000 10 5 1 -40...+125 125 -40...+125 TVJ TVJM Tstg VISOL VRRM V 800 1200 1400 1600 50/60Hz, RMS _ IISOL<1mA t=1min t=1s Mounting torque (M5) (10-32 UNF) V/us W o C 2500 3000 V~ 5 ± 15 % 44 ± 15 % Nm/lb.in. 50 g S3PHBD70, S3PHB70, S3PFB70 Three Phase Half Controlled Bridge Modules/Full Controlled Bridge Symbol ID,IR VT, VF VTO Test Conditions Characteristic Values Unit 5 mA IT, IF=300A; TVJ=25 C 1.64 V For power-loss calculations only 0.85 V TVJ=TVJM; VR=VRRM; VD=VDRM o 11 rT VGT IGT VGD o m VD=6V; TVJ=25 C TVJ=-40oC 1.5 1.6 V VD=6V; TVJ=25oC TVJ=-40oC 100 200 mA TVJ=TVJM; VD=2/3VDRM 0.2 V 5 mA IGD o IL TVJ=25 C; tp=10us IG=0.45A; diG/dt=0.45A/us 450 mA IH TVJ=25oC; VD=6V; RGK= 200 mA 2 us 250 us 45 A o tgd TVJ=25 C; VD=1/2VDRM IG=0.45A; diG/dt=0.45A/us tq TVJ=TVJM; IT=20A; tp=200us; -di/dt=10A/us VR=100V; dv/dt=15V/us; VD=2/3VDRM typ. IRM RthJC per thyristor/diode; DC current per module 0.9 0.15 K/W RthJK per thyristor/diode; DC current per module 1.1 0.157 K/W dS Creeping distance on surface 16.1 mm dA Strike distance through air 7.5 mm a Maximum allowable acceleration 50 m/s2 FEATURES APPLICATIONS ADVANTAGES * Low forward voltage drop * Package with copper base plate * Planar passivated chips * Isolation voltage 3000 V~ * 1/4''fast-on power terminals * Input rectifiers for PWM inverter * Supplies fir DC power equipment * Field supply for DC motors * Battery DC power supplies * Space and weight savings * Easy to mount with two screws * Improved temperature and power cycling capability * Small and light weight