AD ADG417

a
LC2MOS Precision
Mini-DIP Analog Switch
ADG417
FEATURES
44 V Supply Maximum Ratings
V SS to VDD Analog Signal Range
Low On Resistance (<35 ⍀)
Ultralow Power Dissipation (<35 ␮W)
Fast Switching Times
tON (160 ns max)
tOFF (100 ns max)
Break-Before-Make Switching Action
Plug-In Replacement for DG417
FUNCTIONAL BLOCK DIAGRAM
D
S
IN
ADG417
APPLICATIONS
Precision Test Equipment
Precision Instrumentation
Battery Powered Systems
Sample Hold Systems
SWITCH SHOWN FOR A
LOGIC "1" INPUT
GENERAL DESCRIPTION
PRODUCT HIGHLIGHTS
The ADG417 is a monolithic CMOS SPST switch. This switch
is designed on an enhanced LC2MOS process that provides low
power dissipation yet gives high switching speed, low on resistance and low leakage currents.
1. Extended Signal Range
The ADG417 is fabricated on an enhanced LC2MOS process,
giving an increased signal range that extends to the supply
rails.
The on resistance profile of the ADG417 is very flat over the
full analog input range ensuring excellent linearity and low
distortion. The part also exhibits high switching speed and high
signal bandwidth. CMOS construction ensures ultralow power
dissipation making the parts ideally suited for portable and
battery powered instruments.
2. Ultralow Power Dissipation
The ADG417 switch, which is turned ON with a logic low on
the control input, conducts equally well in both directions when
ON and has an input signal range that extends to the supplies.
In the OFF condition, signal levels up to the supplies are
blocked. The ADG417 exhibits break-before-make switching
action for use in multiplexer applications. Inherent in the design
is low charge injection for minimum transients when switching
the digital input.
3. Low RON
4. Single Supply Operation
For applications where the analog signal is unipolar, the
ADG417 can be operated from a single rail power supply.
The part is fully specified with a single +12 V power supply
and will remain functional with single supplies as low as
+5 V.
REV. A
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
World Wide Web Site: http://www.analog.com
Fax: 781/326-8703
© Analog Devices, Inc., 1998
ADG417–SPECIFICATIONS
Dual Supply1 (V
DD =
+15 V ⴞ 10%, VSS = –15 V ⴞ 10%, VL = +5 V ⴞ 10%, GND = 0 V, unless otherwise noted)
Parameter
ANALOG SWITCH
Analog Signal Range
RON
LEAKAGE CURRENTS
Source OFF Leakage IS (OFF)
Drain OFF Leakage ID (OFF)
Channel ON Leakage ID, I S (ON)
B Version
–40ⴗC to
+25ⴗC
+85ⴗC
Units
Test Conditions/Comments
V
Ω typ
Ω max
VD = ± 12.5 V, IS = –10 mA
VDD = +13.5 V, VSS = –13.5 V
± 30
nA typ
nA max
nA typ
nA max
nA typ
nA max
VDD = +16.5 V, VSS = –16.5 V
VD = ± 15.5 V, VS = ⫿15.5 V;
Test Circuit 2
VD = ± 15.5 V, VS = ⫿15.5 V;
Test Circuit 2
VS = VD = ± 15.5 V;
Test Circuit 3
2.4
0.8
2.4
0.8
V min
V max
± 0.005
± 0.5
± 0.005
± 0.5
µA typ
µA max
VIN = VINL or V INH
ns typ
ns max
ns typ
ns max
pC typ
RL = 300 Ω, CL = 35 pF;
VS = ± 10 V; Test Circuit 4
RL = 300 Ω, CL = 35 pF;
VS = ± 10 V; Test Circuit 4
VS = 0 V, RL = 0 Ω,
CL = 10 nF; Test Circuit 5
RL = 50 Ω, f = 1 MHz;
Test Circuit 6
VSS to V DD
25
35
± 0.1
± 0.25
± 0.1
± 0.25
± 0.1
± 0.4
DIGITAL INPUTS
Input High Voltage, VINH
Input Low Voltage, VINL
Input Current
IINL or IINH
DYNAMIC CHARACTERISTICS2
tON
T Version
–55ⴗC to
+25ⴗC +125ⴗC
VSS to V DD
25
35
45
± 0.1
± 0.25
± 0.1
± 0.25
± 0.1
± 0.4
±5
±5
±5
± 15
± 15
Charge Injection
100
160
60
100
7
OFF Isolation
80
80
dB typ
CS (OFF)
CD (OFF)
CD , CS (ON)
6
6
55
6
6
55
pF typ
pF typ
pF typ
0.0001
1
0.0001
1
0.0001
1
0.0001
1
0.0001
1
0.0001
1
µA typ
µA max
µA typ
µA max
µA typ
µA max
tOFF
POWER REQUIREMENTS
IDD
ISS
IL
100
145
60
100
7
45
200
150
2.5
2.5
2.5
200
150
2.5
2.5
2.5
VDD = +16.5 V, VSS = –16.5 V
VIN = 0 V or 5 V
VL = +5.5 V
NOTES
1
Temperature ranges are as follows: B Version: –40°C to +85°C; T Version: –55°C to +125°C.
2
Guaranteed by design, not subject to production test.
Specifications subject to change without notice.
–2–
REV. A
ADG417
Single Supply1 (V
DD =
+12 V ⴞ 10%, VSS = 0 V, VL = +5 V ⴞ 10%, GND = 0 V, unless otherwise noted)
Parameter
B Version
–40ⴗC to
+25ⴗC +85ⴗC
ANALOG SWITCH
Analog Signal Range
RON
40
T Version
–55ⴗC to
+25ⴗC +125ⴗC
Units
Test Conditions/Comments
V
Ω typ
Ω max
VD = +3 V, +8.5 V, IS = –10 mA
VDD = +10.8 V
± 30
nA typ
nA max
nA typ
nA max
nA typ
nA max
VDD = +13.2 V
VD = 12.2 V/1 V, VS = 1 V/12.2 V;
Test Circuit 2
VD = 12.2 V/1 V, VS = 1 V/12.2 V;
Test Circuit 2
VS = VD = 12.2 V/1 V;
Test Circuit 3
2.4
0.8
2.4
0.8
V min
V max
± 0.005
± 0.5
± 0.005
± 0.5
µA typ
µA max
VIN = VINL or V INH
RL = 300 Ω, CL = 35 pF;
VS = +8 V; Test Circuit 4
RL = 300 Ω, CL = 35 pF;
VS = +8 V; Test Circuit 4
VS = 0 V, RS = 0 Ω,
CL = 10 nF; Test Circuit 5
RL = 50 Ω, f = 1 MHz;
Test Circuit 6
0 to VDD
0 to VDD
40
60
LEAKAGE CURRENT
Source OFF Leakage IS (OFF)
Drain OFF Leakage ID (OFF)
Channel ON Leakage I D, I S (ON)
± 0.1
± 0.25
± 0.1
± 0.25
± 0.1
± 0.4
DIGITAL INPUTS
Input High Voltage, VINH
Input Low Voltage, VINL
Input Current
IINL or IINH
DYNAMIC CHARACTERISTICS2
tON
±5
±5
±5
70
± 0.1
± 0.25
± 0.1
± 0.25
± 0.1
± 0.4
± 15
± 15
180
250
180
250
ns max
tOFF
85
110
85
110
ns max
Charge Injection
11
11
pC typ
OFF Isolation
80
80
dB typ
CS (OFF)
CD (OFF)
CD , CS (ON)
13
13
65
13
13
65
pF typ
pF typ
pF typ
0.0001
1
0.0001
1
0.0001
1
0.0001
1
µA typ
µA max
µA typ
µA max
POWER REQUIREMENTS
IDD
IL
2.5
2.5
2.5
2.5
VDD = +13.2 V
VIN = 0 V or 5 V
VL = +5.5 V
NOTES
1
Temperature ranges are as follows: B Version: –40°C to +85°C; T Version: –55°C to +125°C.
2
Guaranteed by design, not subject to production test.
Specifications subject to change without notice.
PIN CONFIGURATION
DIP/SOIC
Table I. Truth Table
Logic
Switch Condition
0
1
ON
OFF
8
S 1
NC
ADG417
D
VSS
TOP VIEW
GND 3 (Not to Scale) 6 IN
VDD 4
ORDERING GUIDE
Model
Temperature Range
Package Options*
ADG417BN
ADG417BR
–40°C to +85°C
–40°C to +85°C
N-8
SO-8
7
5
NC = NO CONNECT
*N = Plastic DIP, SO = 0.15" Small Outline IC (SOIC).
REV. A
2
–3–
VL
ADG417
ABSOLUTE MAXIMUM RATINGS 1
Plastic Package, Power Dissipation . . . . . . . . . . . . . . . 400 mW
θJA, Thermal Impedance . . . . . . . . . . . . . . . . . . . . 100°C/W
Lead Temperature, Soldering (10 sec) . . . . . . . . . . . +260°C
SOIC Package, Power Dissipation . . . . . . . . . . . . . . . . 400 mW
θJA, Thermal Impedance . . . . . . . . . . . . . . . . . . . . 155°C/W
Lead Temperature, Soldering
Vapor Phase (60 sec). . . . . . . . . . . . . . . . . . . . . . . +215°C
Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . +220°C
(TA = +25°C unless otherwise noted)
VDD to VSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +44 V
VDD to GND . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +25 V
VSS to GND . . . . . . . . . . . . . . . . . . . . . . . . . . +0.3 V to –25 V
VL to GND . . . . . . . . . . . . . . . . . . . . . . –0.3 V to VDD + 0.3 V
Analog, Digital Inputs2 . . . . . . . . . . . . . VSS – 2 V to VDD +2 V
or 30 mA, Whichever Occurs First
Continuous Current, S or D . . . . . . . . . . . . . . . . . . . . . 30 mA
Peak Current, S or D . . . . . . . . . . . . . . . . . . . . . . . . . 100 mA
(Pulsed at 1 ms, 10% Duty Cycle Max)
Operating Temperature Range
Industrial (B Version) . . . . . . . . . . . . . . . . . –40°C to +85°C
Extended (T Version) . . . . . . . . . . . . . . . . –55°C to +125°C
Storage Temperature Range . . . . . . . . . . . . . –65°C to +150°C
Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
NOTES
1
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those listed in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability. Only one absolute
maximum rating may be applied at any one time.
2
Overvoltages at IN, S or D will be clamped by internal diodes. Current should be
limited to the maximum ratings given.
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the ADG417 features proprietary ESD protection circuitry, permanent damage may
occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.
TERMINOLOGY
VDD
VSS
VL
GND
S
D
IN
RON
IS (OFF)
ID (OFF)
ID, IS (ON)
WARNING!
ESD SENSITIVE DEVICE
VD (VS)
CS (OFF)
CD (OFF)
CD, CS (ON)
tON
Analog voltage on terminals D, S.
“OFF” switch source capacitance.
“OFF” switch drain capacitance.
“ON” switch capacitance.
Delay between applying the digital control
input and the output switching on.
Delay between applying the digital control
tOFF
input and the output switching off.
Maximum input voltage for logic “0.”
VINL
VINH
Minimum input voltage for logic “1.”
IINL (IINH)
Input current of the digital input.
Charge Injection A measure of the glitch impulse transferred
from the digital input to the analog output
during switching.
Off Isolation
A measure of unwanted signal coupling
through an “OFF” channel.
Positive supply current.
IDD
ISS
Negative supply current.
IL
Logic supply current.
Most positive power supply potential.
Most negative power supply potential in dual
supplies. In single supply applications, it
may be connected to GND.
Logic power supply (+5 V).
Ground (0 V) reference.
Source terminal. May be an input or an
output.
Drain terminal. May be an input or an
output.
Logic control input.
Ohmic resistance between D and S.
Source leakage current with the switch
“OFF.”
Drain leakage current with the switch
“OFF.”
Channel leakage current with the switch
“ON.”
–4–
REV. A
Typical Performance Characteristics–ADG417
100
50
TA = +258C
VDD = +5V
VSS = –5V
TA = +258C
80
VDD = +12V
VSS = –12V
30
RON – V
RON – V
40
VDD = +10V
VSS = –10V
VDD = +5V
VSS = 0V
60
VDD = +10V
VSS = 0V
40
20
VDD = +15V
VSS = –15V
10
0
–15
–5
0
5
VDD = +15V
VSS = 0V
20
0
–10
10
15
0
10
5
15
VS, VD – Volts
VS, VD – Volts
Figure 1. RON as a Function of VD (VS): Dual Supply Voltage
Figure 4. R ON as a Function of VD (V S): Single Supply
Voltage
50
100
VDD = +15V
VSS = –15V
VL = +5V
40
VDD = +12V
VSS = 0V
VL = +5V
80
30
RON – V
RON – V
VDD = +12V
VSS = 0V
+1258C
20
60
+1258C
+858C
40
+858C
+258C
+258C
10
20
0
–15
–10
–5
0
5
10
0
15
0
6
VS, VD – Volts
3
VS, VD – Volts
Figure 2. RON as a Function of VD (VS) for Different
Temperatures
0.006
VDD = +15V
VSS = –15V
TA = +258C
0.01
0.004
IS (OFF)
ID (OFF)
0.00
–0.01
–0.02
–0.03
–15
VDD = +12V
VSS = 0V
TA = +258C
ID (ON)
LEAKAGE CURRENT – nA
LEAKAGE CURRENT – nA
12
Figure 5. R ON as a Function of VD (V S) for Different
Temperatures
0.02
ID (ON)
0.002
IS (OFF)
ID (OFF)
0.000
–0.002
–10
–5
0
VS, VD – Volts
5
10
–0.004
15
Figure 3. Leakage Currents as a Function of V S (VD)
REV. A
9
0
2
4
6
VS, VD – Volts
8
10
12
Figure 6. Leakage Currents as a Function of V S (VD)
–5–
ADG417
10mA
300
VDD = +15V
VSS = –15V
VL = +5V
1mA
VIN = +5V
250
100mA
200
10mA
t – ns
I SUPPLY
I+, I–
1mA
IL
tON – SINGLE SUPPLY
150
100
tON – DUAL SUPPLY
100nA
tOFF – DUAL SUPPLY
50
10nA
tOFF – SINGLE SUPPLY
1nA
0
102
103
104
105
FREQUENCY – Hz
106
107
5
Figure 7. Supply Current vs. Input Switching Frequency
7
11
9
SUPPLY VOLTAGE – Volts
13
15
Figure 8. Switching Time vs. Power Supply
–6–
REV. A
ADG417
Test Circuits
IDS
V1
S
IS (OFF)
S
ID (OFF)
D
S
D
ID (ON)
D
VD
VS
VD
VS
VS
RON = V1/IDS
Test Circuit 2. Off Leakage
Test Circuit 1. On Resistance
VDD
Test Circuit 3. On Leakage
VL
0.1mF
0.1mF
3V
VL
VDD
D
S2
50%
VIN
50%
VOUT
RL
300V
VS
CL
35pF
IN
90%
90%
VOUT
VSS
GND
tON
tOFF
0.1mF
VSS
Test Circuit 4. Switching Times
VDD
VL
0.1mF
0.1mF
3V
VL
VDD
RL
VIN
D
S2
CL
10nF
VS
VOUT
DVOUT
VOUT
QINJ = CL 3 DVOUT
IN
GND
VSS
0.1mF
VSS
Test Circuit 5. Charge Injection
VDD
VL
0.1mF
0.1mF
VL
VDD
S
D
VOUT
RL
50V
IN
VS
GND
VSS
VIN
0.1mF
VSS
Test Circuit 6. Off Isolation
REV. A
–7–
ADG417
OUTLINE DIMENSIONS
Dimensions shown in inches and (mm).
8-Lead Plastic DIP (N-8)
8
C1974a–0–9/98
0.430 (10.92)
0.348 (8.84)
5
0.280 (7.11)
0.240 (6.10)
PIN 1
1
4
0.100 (2.54)
BSC
0.210 (5.33)
MAX
0.325 (8.25)
0.300 (7.62)
0.060 (1.52)
0.015 (0.38)
0.195 (4.95)
0.115 (2.93)
0.130
(3.30)
MIN
0.160 (4.06)
0.115 (2.93)
0.022 (0.558) 0.070 (1.77) SEATING
0.014 (0.356) 0.045 (1.15) PLANE
0.015 (0.381)
0.008 (0.204)
8-Lead SOIC (SO-8)
(Narrow Body)
0.1968 (5.00)
0.1890 (4.80)
8
0.1574 (4.00)
0.1497 (3.80) 1
5
4
0.2440 (6.20)
0.2284 (5.80)
PIN 1
0.0196 (0.50)
x 458
0.0099 (0.25)
0.0500 (1.27)
BSC
SEATING
PLANE
0.0688 (1.75)
0.0532 (1.35)
0.0192 (0.49)
0.0138 (0.35)
88
0.0500 (1.27)
0.0098 (0.25) 08
0.0160 (0.41)
0.0075 (0.19)
PRINTED IN U.S.A.
0.0098 (0.25)
0.0040 (0.10)
–8–
REV. A