2.54mm Pitch Card Edge Connector CR22 Series ■Features 1. 2.54mm pitch Contact 2. Variation in number of contacts 20, 30, 34, 36, 44, 50, 60, 62, 68, 72, 80,100, and 120 contacts are available. 3. Board Mount Type Straight dip and right angle through hole types are available. 4. To prevent mis-insertion in the board Using the polarizing key prevents mis-insertion in the printed board. ■Product Standards Current rating: 3A Operating Temperature Range: -30 to +85ç (Note 1) Storage Temperature Range: -10 to +60ç (Note 2) Voltage rating: 300VAC Operating Humidity Range: 40 to 80% Storage Humidity Range: 40 to 70% (Note 2) Rating Item Specification Condition 1.Insulation Resistance 1000M ohms min. 500V DC 2.Withstanding Voltage No flashover or insulation breakdown. 1000V AC/1 minute. 3.Contact Resistance 20m ohms max. 100mA 4.Vibration No electrical discontinuity of 10µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5.Humidity(Steady state) Insulation resistance : 1000M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95% 6.Temperature Cycle (-65ç : 30 minutes→15 to 35ç: 5 minutes max.→ 125ç : 30 minutes→15 to 35ç: 5 minutes max.) 5 cycles No damage, cracks, or parts looseness. 500 cycles 7.Durability (Mating/un-mating) Contact resistance : 20m ohms max. 8.Resistance to Soldering heat No deformation of components affecting performance. Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. ■Material Parts Material Insulator PBT Contact Copper alloy Finish Remarks Black UL94V-0 Contact area Selective gold plated --------------- Lead area Tin-lead plated --------------- ■Ordering Information CR22 1 1 2 A - 50 D - 2.54 DS 2 3 4 Series Name : CR22 Blank : With Mounting hole A : Without mounting hole B : Card Edge 7.62mm type with mounting hole C : Card Edge 7.62mm type without mounting hole D : VERSA bus type with mounting hole E : VERSA bus type without mounting hole 5 6 3 Number of contacts : 20, 30, 34, 36, 44, 50, 60, 62, 68, 72, 80, 100, 120 4 Contact alignment : D : Double side 5 Contact pitch : 2.54mm 6 Contact type DS : Straight type DSA : Right angle type A17 ■Straight Through hole Type Unit: mm CL No. Number of Contacts A B CR22-20D-2.54DS Part Number 522-0063-9 20 49.04 41.44 34.04 27.94 22.86 34.04 9.5 CR22-30D-2.54DS 522-0009-3 30 61.74 54.14 46.74 40.64 35.56 46.74 9.5 CR22-34D-2.54DS 522-0011-5 34 66.82 59.22 51.82 45.72 40.64 51.82 9.5 CR22-44D-2.54DS 522-0001-1 44 79.52 71.92 64.52 58.42 53.34 64.52 9.5 CR22-50D-2.54DS 522-0003-7 87.14 79.54 72.14 66.04 60.96 72.14 9.5 CR22B-50D-2.54DS 522-0047-2 84.71 78.11 70.10 66.04 90.96 70.10 9.4 CR22-68D-2.54DS 522-0017-1 68 110.00 102.40 95.00 88.90 83.82 95.00 9.5 CR22-72D-2.54DS 522-0019-7 72 115.08 107.48 100.08 93.98 88.90 100.08 9.5 CR22-80D-2.54DS 522-0049-8 80 125.24 117.64 110.24 104.14 99.06 110.24 9.5 CR22-100D-2.54DS 522-0005-2 100 150.64 143.04 135.64 129.54 124.46 135.64 9.5 522-0053-5 120 176.04 168.44 161.04 154.75 149.86 161.04 10 Note CR22D-120D-2.54DS 50 Note : The 120 contacts type differs in configuration. A18 C D E F G ■Straight Through hole Type Unit: mm Note Part Number CL No. Number of Contacts A B C D CR22A-20D-2.54DS 522-0064-1 20 34.04 27.94 22.86 9.5 CR22A-30D-2.54DS 522-0010-2 30 46.74 40.64 35.56 9.5 CR22A-34D-2.54DS 522-0012-8 34 51.82 45.72 40.64 9.5 CR22A-36D-2.54DS 522-0008-0 54.36 48.26 43.18 9.5 CR22C-36D-2.54DS 522-0072-0 52.32 48.26 43.18 9.4 CR22A-44D-2.54DS 522-0002-4 64.52 58.42 53.34 9.5 CR22A-50D-2.54DS 522-0004-0 72.14 66.04 60.96 9.5 CR22C-50D-2.54DS 522-0048-5 70.10 66.04 60.96 9.4 CR22A-60D-2.54DS 522-0014-3 84.84 78.74 73.66 9.5 CR22A-62D-2.54DS 522-0016-9 87.38 81.28 76.20 9.5 CR22C-62D-2.54DS 522-0060-0 85.34 81.28 76.20 9.4 CR22A-68D-2.54DS 522-0018-4 68 95.00 88.90 83.82 9.5 CR22A-72D-2.54DS 522-0020-6 72 100.08 93.98 88.90 9.5 CR22A-80D-2.54DS 522-0050-7 80 110.24 104.14 99.06 9.5 CR22A-100D-2.54DS 522-0006-5 100 135.64 129.54 124.46 9.5 CR22E-120D-2.54DS 522-0054-8 120 161.04 154.75 149.86 10 36 44 50 60 62 Note : The 120 contacts type differs in configuration. A19 ■Right Angle Through hole Type Note : Mounting hole of CR22D is design symmetry Unit: mm Part Number A20 CL No. Number of Contacts A B C D E F G H 61.74 54.14 46.74 40.64 35.56 9.5 16.5 9 --------- --------- 46.74 40.64 35.56 9.5 16.5 9 66.82 59.22 51.82 45.72 40.64 9.5 16.5 9 --------- --------- 51.82 45.72 40.64 9.5 16.5 9 CR22-30D-2.54DSA 522-0023-4 CR22A-30D-2.54DSA 522-0034-0 CR22-34D-2.54DSA 522-0024-7 CR22A-34D-2.54DSA 522-0035-3 CR22-36D-2.54DSA 522-0025-0 36 69.36 61.76 54.36 48.26 43.18 9.5 16.5 9 CR22A-44D-2.54DSA 522-0037-9 44 --------- --------- 64.52 58.42 53.34 9.5 16.5 9 CR22-50D-2.54DSA 522-0027-5 87.14 79.54 72.14 66.04 60.96 9.5 16.5 9 CR22B-50D-2.54DSA 522-0045-7 84.71 78.11 70.10 66.04 60.96 9.4 15.49 7.62 CR22-60D-2.54DSA 522-0028-8 99.84 92.24 84.84 78.74 73.66 9.5 16.5 9 CR22-62D-2.54DSA 522-0029-0 102.38 94.78 87.38 81.28 76.20 9.5 16.5 9 CR22A-62D-2.54DSA 522-0040-3 --------- --------- 87.38 81.28 76.20 9.5 16.5 9 CR22-68D-2.54DSA 522-0030-0 68 110.00 102.40 95.00 88.90 83.82 9.5 16.5 9 CR22-72D-2.54DSA 522-0031-2 72 115.08 107.48 100.08 93.98 88.90 9.5 16.5 9 CR22-100D-2.54DSA 522-0033-8 150.64 143.04 135.64 129.54 124.46 9.5 16.5 9 CR22A-100D-2.54DSA 522-0044-4 --------- --------- 135.64 129.54 124.46 9.5 16.5 9 30 34 50 60 62 100 BPCB Dimensions 30 to 45° 30 to 45° 0 Note 1. The 120 contacts type indicates 154.69 –0.25 . Note 2. The 120 contacts type indicates 2.415. Unit: mm Number of Contacts 12 30 34 36 44 50 60 62 68 72 A 22.86 35.56 40.64 43.18 53.34 60.96 73.66 76.20 83.82 88.90 B 27.84 40.54 45.62 48.16 58.32 65.94 78.64 81.18 88.80 93.88 104.04 129.44 154.69 80 100 120 99.06 124.46 149.86 ■Polarizing Key CR13-GPIN(A) Part Number CL No. Material Color CR13-GPIN(A) 513-0010-1 Polyacetal White Note: Using the polarizing key prevents mis-insertion in the printed board. To use the polarizing key, insert the polarizing key so as to hit the mold bottom. : ■PCB mounting pattern Unit: mm Number of Contacts 12 30 34 36 44 50 60 62 68 72 A 22.86 35.56 40.64 43.18 53.34 60.96 73.66 76.2 83.82 88.9 80 100 120 99.06 124.46 149.86 Note : The contact DSA type indicates 2.54mm±0.05. A21