3.96mm Pitch Card Edge Connector CR6 Series Connection Method Eyelet Open End Through hole ■Features 3. Connection Type 1. Contact Type Eyelet, open end and through hole types are available. Uses the tuning fork contact, where the contact pitch 4. Prevents mis-insertion in the board is 3.96mm. Using the polarizing key prevents mis-insertion in the printed board. 2. Variation in number of contacts 6, 10, 12, 15, 18, 22, 28, 36 contacts are available. ■Product Specifications Rating Current rating: 5A Operating Temperature Range: -30 to +85ç (Note 1) Storage Temperature Range: -10 to +60ç (Note 2) Voltage rating: 600V AC Operating Humidity Range: 40 to 80% Item Storage Humidity Range: 40 to 70 Specification (Note 2) Condition 1.Insulation Resistance 5000M ohms min. 500V DC 2.Withstanding Voltage No flashover or insulation breakdown. 1800V AC/1 minute. 3.Contact Resistance 6m ohms max. 1A 4.Vibration No electrical discontinuity of 10µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5.Humidity(Steady state) Insulation resistance: 1000M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95% 6.Temperature Cycle (-65ç : 30 minutes→15 to 35ç: 5 minutes max.→ 125ç : 30 minutes→15 to 35ç: 5 minutes max.) 5 cycles No damage, cracks, or parts looseness. 500 cycles 7.Durability (Mating/un-mating) Contact resistance: 6m ohms max. 8.Resistance to Soldering heat No deformation of components affecting performance. Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. A13 ■Material Parts Material Finish Remarks Insulator Dieallylphtalate Blue Contact Copper alloy Gold plated UL94V-0 ________ ■Ordering Information CR6 q q Series Name – 22S – 3.96 E w e r r Contact type : CR6 E : Eyelet type w Number of contacts : 6, 10, 12, 15, 18, 22, 28, 36 OE : Open end type e Contact pitch DS : Through hole type : 3.96mm BContact Type (1) Eyelet A14 (2) Open End (3) Through hole NOTE or Unit: mm Part Number CL No. CR6-06S-3.96E 506-0019-8 CR6-06S-3.96DS 506-0022-2 CR6-10S-3.96E 506-0001-2 CR6-10S-3.96DS 506-0013-1 CR6-12S-3.96E 506-0023-5 CR6-12S-3.96DS 506-0026-3 CR6-15S-3.96E 506-0002-5 CR6-15S-3.96DS 506-0014-4 CR6-18S-3.96E 506-0003-8 CR6-18S-3.96OE 506-0007-9 CR6-18S-3.96DS 506-0015-7 CR6-22S-3.96E 506-0004-0 CR6-22S-3.96OE 506-0008-1 CR6-22S-3.96DS 506-0016-0 CR6-28S-3.96E 506-0031-3 CR6-28S-3.96OE 506-0032-6 CR6-28S-3.96DS 506-0034-1 CR6-36S-3.96E 506-0027-6 CR6-36S-3.96DS 506-0030-0 Number of Contacts A B C D E 6 45 38.9 31.47 28 19.8 10 61 54.8 47.3 43.8 35.64 12 68.8 62.7 55.27 51.7 43.56 15 81 74.6 67.2 63.6 55.44 18 93 86.5 79 75.5 67.32 22 109 102.4 95 91.3 83.16 28 133.7 126.1 118.2 115.1 106.98 36 166 158 150 146.8 138.66 NOTE : 11.1mm for 28, 36 contacts BPCB Cutouts BContact No. Alignment List Unit: mm Number of Contacts 6 10 12 15 A 38.9 54.8 62.7 74.6 18 22 28 86.5 102.4 126.1 36 158 NOTE 1 : To utilize alphabetic symbols, following 8 alphabetic characters are not used. G. I, O, Q, g, i, o, q NOTE 2 : The above pattern is viewed from the contact (connection) side. A15 BPCB Dimensions Unit: mm Number of Contacts 6 10 12 15 18 22 28 36 A 19.8 35.64 43.56 55.44 67.32 83.16 106.98 138.68 B 27.8 43.60 51.50 63.40 75.30 91.10 114.90 146.60 NOTE : Using the polarizing key prevents mis-insertion in the printed board. To use the polarizing key, insert the polarizing key so as to hit the mold bottom. ■Polarizing Key A16 Part Number CL No. Material Color CR6-GPIN (A) 506-0018-5 ABS Gray