(1/3) 001-01 / 20011220 / e511_nl4532.fm Inductors NL Series NL4532 Type For General Applications SMD FEATURES • The NL series are available in 5 form factors ranging from 2016 to 5650. • Utilizing a miniaturized winding structure, these products provide high Q characteristics. • Inductance tolerance is ±5 percent. APPLICATIONS Personal computers, hard disk drives, and other electronic equipment. FLUX AND CLEANING Rosin-based flux is recommended. Cleaning Conditions Solvent Time Chlorine-based solvent (Do not use acid or alkali solvents.) 2min max. PRODUCT IDENTIFICATION NL 201614 (1) (2) T- 2R2 J (3) (4) (5) (1)Series name SPECIFICATIONS Operating temperature range –20 to +85°C Storage temperature range –40 to +85°C [Unit of products] RECOMMENDED SOLDERING CONDITIONS REFLOW SOLDERING (2)Dimensions L×W×T 2.1×1.6×1.4mm 2.5×2.0×1.8mm 3.2×2.5×2.2mm 4.5×3.2×3.2mm 5.6×5.0×5.0mm 201614 252018 322522 453232 565050 10s max. 230˚C 200˚C Natural cooling (3)Packaging style T 150˚C Taping (reel) 30s max. 100˚C (4)Inductance value 1µH 33µH 1R0 330 Preheating: 120s Time (s) FLOW SOLDERING (5)Inductance tolerance 10s max. 260˚C Natural cooling J K ±5% ±10% PACKAGING STYLE AND QUANTITIES 150˚C Packaging style Taping 100˚C Preheating: 120s Time (s) IRON SOLDERING Perform soldering at 250°C on 30W max. within 5 seconds. VAPOR-PHASING 10s max. 220˚C Natural cooling 215˚C 150˚C 30s max. 100˚C Preheating: 120s Time (s) • All specifications are subject to change without notice. Type NL201614T NL252018T NL322522T NL453232T NL565050T Quantity 2000 pieces/reel 2000 pieces/reel 2000 pieces/reel 500 pieces/reel 400 pieces/reel (2/3) 001-01 / 20011220 / e511_nl4532.fm Inductors NL Series NL4532 Type For General Applications SMD SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN Painted for the convenience of positioning Inductor Pattern 102J 3.2±0.2 0.5 (0.4) 2.8 C0.5 3.2±0.2 4.5±0.3 Terminal electrode 1.5 2.6±0.1 3 1.5 Dimensions in mm Weight: 180mg ELECTRICAL CHARACTERISTICS Inductance Inductance Q Test frequency Self-resonant (µH) tolerance min. L, Q (MHz) frequency (MHz)min. 1.0 ±5% 50 7.96 100.0 1.2 ±5% 50 7.96 80.0 1.5 ±5% 50 7.96 70.0 1.8 ±5% 50 7.96 60.0 2.2 ±5% 50 7.96 55.0 2.7 ±5% 50 7.96 50.0 3.3 ±5% 50 7.96 45.0 3.9 ±5% 50 7.96 40.0 4.7 ±5% 50 7.96 35.0 5.6 ±5% 50 7.96 33.0 6.8 ±5% 50 7.96 27.0 8.2 ±5% 50 7.96 25.0 10.0 ±5% 50 2.52 20.0 12.0 ±5% 50 2.52 18.0 15.0 ±5% 50 2.52 17.0 18.0 ±5% 50 2.52 15.0 22.0 ±5% 50 2.52 13.0 27.0 ±5% 50 2.52 12.0 33.0 ±5% 50 2.52 11.0 39.0 ±5% 50 2.52 10.0 47.0 ±5% 50 2.52 10.0 56.0 ±5% 50 2.52 9.0 68.0 ±5% 50 2.52 9.0 82.0 ±5% 50 2.52 8.0 100.0 ±5% 40 0.796 8.0 120.0 ±5% 40 0.796 6.0 150.0 ±5% 40 0.796 5.0 180.0 ±5% 40 0.796 5.0 220.0 ±5% 40 0.796 4.0 270.0 ±5% 40 0.796 4.0 330.0 ±5% 40 0.796 3.5 390.0 ±5% 40 0.796 3.0 470.0 ±5% 40 0.796 3.0 560.0 ±5% 30 0.796 3.0 680.0 ±5% 30 0.796 3.0 820.0 ±5% 30 0.796 2.5 1000.0 ±5% 30 0.252 2.5 • Inductance tolerance is only standard. • Test equipment L, Q: YHP4194A IMPEDANCE ANALYZER (16085A+16093B+TDK TF-1) SRF: HP8753C NETWORK ANALYZER (Zin=Zout=50Ω) Rdc: MATSUSHITA VP-2941A DIGITAL MILLIOHM METER • All specifications are subject to change without notice. DC resistance (Ω)max. 0.50 0.55 0.60 0.65 0.70 0.75 0.80 0.90 1.00 1.10 1.20 1.40 1.60 2.00 2.50 2.80 3.20 3.60 4.00 4.50 5.00 5.50 6.00 7.00 8.00 8.00 9.00 9.50 10.00 12.00 14.00 16.00 26.00 30.00 30.00 35.00 40.00 Rated current (mA)max. 450 430 410 390 380 370 355 330 315 300 285 270 250 225 200 190 180 170 160 150 140 135 130 120 110 110 105 102 100 92 85 80 62 50 50 30 30 Part No. NL453232T-1R0J NL453232T-1R2J NL453232T-1R5J NL453232T-1R8J NL453232T-2R2J NL453232T-2R7J NL453232T-3R3J NL453232T-3R9J NL453232T-4R7J NL453232T-5R6J NL453232T-6R8J NL453232T-8R2 NL453232T-100J NL453232T-120J NL453232T-150J NL453232T-180J NL453232T-220J NL453232T-270J NL453232T-330J NL453232T-390J NL453232T-470J NL453232T-560J NL453232T-680J NL453232T-820J NL453232T-101J NL453232T-121J NL453232T-151J NL453232T-181J NL453232T-221J NL453232T-271J NL453232T-331J NL453232T-391J NL453232T-471J NL453232T-561J NL453232T-681J NL453232T-821J NL453232T-102J (3/3) 001-01 / 20011220 / e511_nl4532.fm Inductors NL Series NL4532 Type For General Applications SMD TYPICAL ELECTRICAL CHARACTERISTICS INDUCTANCE vs. FREQUENCY IMPEDANCE vs. FREQUENCY CHARACTERISTICS CHARACTERISTICS INDUCTANCE CHANGE vs. DC SUPERPOSITION CHARACTERISTICS 50k 5000 1000µH 470µH 500 Test circuit C=20000µF L=5H A DC Specimen 1000µH 1000µH Inductance (µH) 10k 5k 500 Impedance(Ω) Inductance (µH) 1000 100µH 100 50 100µH 47µH 50 1k 10µH 10 10µH 500 4.7µH 5 1µH 10µH 10 100 5 50 2 0.5 0.1 YHP model-4275A or equivalent 100µH 100 Universal bridge 1000 4194A IMPEDANCE 100k GAIN-PHASE ANALYZER 4194A IMPEDANCE 10000 GAIN-PHASE ANALYZER 1 5 Frequency (MHz) 10 40 20 2 0.1 0.5 1 5 Frequency (MHz) 10 10 50 100 500 DC current (mA) 1000 40 T –20 Q vs. FREQUENCY CHARACTERISTICS 100 4 3 2 1 0 20 –1 ––2 2 –3 –4 Test equipment: Q meter model-4340A, YHP 80 40 60 Temperature (˚C) 10µH 330µH 68µH 18µH 80 100 Test equipment: LCR model-4275A YHP, at 10kHz 1Vrms • All specifications are subject to change without notice. 3.9µH 470µH 60 39µH Q ∆L /L 20˚C (%) YPICAL ELECTRICAL CHARACTERISTICS INDUCTANCE CHANGE vs. TEMPERATURE CHARACTERISTICS 1µH 10µH 40 1000µH 20 0 0.05 0.1 0.5 1 5 Frequency (MHz) 10