TPS76130, TPS76132, TPS76133, TPS76138, TPS76150 LOW-POWER 100-mA LOW-DROPOUT LINEAR REGULATORS SLVS178B – DECEMBER 1998 – REVISED MAY 2001 D D D D D D D D DBV PACKAGE (TOP VIEW) 100-mA Low-Dropout Regulator Fixed Output Voltage Options: 5 V, 3.8 V, 3.3 V, 3.2 V, and 3 V Dropout Typically 170 mV at 100-mA Thermal Protection Less Than 1 µA Quiescent Current in Shutdown –40°C to 125°C Operating Junction Temperature Range 5-Pin SOT-23 (DBV) Package ESD Protection Verified to 1.5 KV Human Body Model (HBM) per MIL-STD-883C EN GND IN 3 2 1 4 5 NC OUT NC – No internal connection description The TPS761xx is a 100 mA, low dropout (LDO) voltage regulator designed specifically for battery-powered applications. A proprietary BiCMOS fabrication process allows the TPS761xx to provide outstanding performance in all specifications critical to battery-powered operation. The TPS761xx is available in a space-saving SOT-23 (DBV) package and operates over a junction temperature range of –40°C to 125°C. AVAILABLE OPTIONS TJ VOLTAGE PACKAGE 3V 3.2 V – 40°C to 125°C 3.3 V SOT-23 SOT 23 (DBV) 3.8 V 5V PART NUMBER TPS76130DBVR† TPS76130DBVT‡ SYMBOL PAEI TPS76132DBVR† TPS76133DBVR† TPS76132DBVT‡ TPS76133DBVT‡ PAFI TPS76138DBVR† TPS76150DBVR† TPS76138DBVT‡ TPS76150DBVT‡ PAKI PAII PALI † The DBVR passive indicates tape and reel of 3000 parts. ‡ The DBVT passive indicates tape and reel of 250 parts. functional block diagram § CS IN OUT EN Current Limit Vref + Thermal Sense GND § Current sense Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2001, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 TPS76130, TPS76132, TPS76133, TPS76138, TPS76150 LOW-POWER 100-mA LOW-DROPOUT LINEAR REGULATORS SLVS178B – DECEMBER 1998 – REVISED MAY 2001 Terminal Functions TERMINAL NAME I/O NO. EN 3 GND 2 IN 1 NC 4 OUT 5 DESCRIPTION I Enable input Ground I Input voltage No connection O Regulated output voltage absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to 16 V Voltage range at EN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to VI + 0.3 V Peak output current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . internally limited Continuous total dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating junction temperature range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to 150°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C ESD rating, HBM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 kV † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: All voltages are with respect to device GND pin. DISSIPATION RATING TABLE BOARD PACKAGE RθJC RθJA DERATING FACTOR ABOVE TA = 25°C TA ≤ 25°C POWER RATING TA = 70°C POWER RATING TA = 85°C POWER RATING Low K‡ High K§ DBV 65.8 °C/W 259 °C/W 3.9 mW/°C 386 mW 212 mW 154 mW DBV 65.8 °C/W 180 °C/W 5.6 mW/°C 555 mW 305 mW 222 mW ‡ The JEDEC Low K (1s) board design used to derive this data was a 3 inch x 3 inch, two layer board with 2 ounce copper traces on top of the board. § The JEDEC High K (2s2p) board design used to derive this data was a 3 inch x 3 inch, multilayer board with 1 ounce internal power and ground planes and 2 ounce copper traces on top and bottom of the board. recommended operating conditions MIN Input voltage, VI MAX UNIT 3.35 16 TPS76132 3.58 16 TPS76133 3.68 16 TPS76138 4.18 16 TPS76150 5.38 16 0 100 mA –40 125 °C Continuous output current, IO Operating junction temperature, TJ 2 NOM TPS76130 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 V TPS76130, TPS76132, TPS76133, TPS76138, TPS76150 LOW-POWER 100-mA LOW-DROPOUT LINEAR REGULATORS SLVS178B – DECEMBER 1998 – REVISED MAY 2001 electrical characteristics over recommended operating free-air temperature range, VI = VO(typ) + 1 V, IO = 1 mA, EN = VI, Co = 4.7 µF (unless otherwise noted) PARAMETER TEST CONDITIONS TPS76130 TPS76132 VO Output voltage TPS76133 TPS76138 TJ = 25°C TJ = 25°C, 1 mA < IO < 100 mA Standby current Vn 3.04 2.9 3.04 3.07 TJ = 25°C TJ = 25°C, 3.16 1 mA < IO < 100 mA 3.2 3.11 3.24 3.08 3.3 TJ = 25°C TJ = 25°C, 3.26 1 mA < IO < 100 mA 3.3 3.21 3.34 3.18 3.4 TJ = 25°C TJ = 25°C, 3.76 1 mA < IO < 100 mA TJ = 25°C TJ = 25°C, 3.84 3.68 3.9 5 V V 5.05 4.88 5.05 4.86 5.1 1 90 V 3.84 3.71 4.95 1 mA < IO < 100 mA V 3.34 1 mA < IO < 100 mA 3.8 UNIT 3.24 1 mA < IO < 100 mA EN = 0 V IO = 0 mA, IO = 0 mA TJ = 25°C IO = 1 mA, IO = 1 mA TJ = 25°C 100 IO = 10 mA, IO = 10 mA TJ = 25°C 190 IO = 50 mA, IO = 50 mA TJ = 25°C 850 IO = 100 mA, IO = 100 mA TJ = 25°C 2600 TPS76130 4 V < VI < 16, 10 4.2 V < VI < 16, IO = 1 mA IO = 1 mA 3 TPS76132 3 10 TPS76133 4.3 V < VI < 16, 3 10 TPS76138 4.8 V < VI < 16, IO = 1 mA IO = 1 mA 3 10 TPS76150 6 V < VI < 16 IO = 1 mA Co = 10 µF, TJ = 25°C TJ = 25°C 3 10 Quiescent current (GND current) Input regulation MAX 3 2.89 1 mA < IO < 100 mA II(standby) TYP 1 mA < IO < 100 mA 1 mA < IO < 100 mA TPS76150 MIN 2.96 V µA 115 130 130 170 220 260 µA 1100 1200 4000 Output noise voltage BW = 300 Hz to 50 kHz Ripple rejection f = 1 kHz, Co = 10 µF, POST OFFICE BOX 655303 3600 • DALLAS, TEXAS 75265 mV 190 µVrms 63 dB 3 TPS76130, TPS76132, TPS76133, TPS76138, TPS76150 LOW-POWER 100-mA LOW-DROPOUT LINEAR REGULATORS SLVS178B – DECEMBER 1998 – REVISED MAY 2001 electrical characteristics over recommended operating free-air temperature range, VI = VO(typ) + 1 V, IO = 1 mA, EN = VI, Co = 4.7 µF (unless otherwise noted) (continued) PARAMETER TEST CONDITIONS Dropout voltage TYP MAX IO = 0 mA, IO = 0 mA TJ = 25°C MIN 1 3 IO = 1 mA, IO = 1 mA TJ = 25°C 7 10 IO = 10 mA, IO = 10 mA TJ = 25°C IO = 50 mA, IO = 50 mA TJ = 25°C 120 IO = 100 mA, IO = 100 mA TJ = 25°C 170 5 15 40 125 135 EN = 0 V –1 EN = VI Table of Graphs FIGURE vs Output current 1, 2, 3 vs Free-air temperature 4, 5, 6 Ground current vs Free-air temperature 7, 8, 9 Output noise vs Frequency 10 Output impedance vs Frequency 11 Dropout voltage vs Free-air temperature Output voltage 12 Line transient response 13, 15 Load transient response 14, 16 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 mA V 0.8 TYPICAL CHARACTERISTICS 4 240 2 Low level enable input Zo VDO 150 280 100 Input current (EN) mV 180 High level enable input VO 60 90 Peak output current/current limit II UNIT 0 1 2.5 5 V µA TPS76130, TPS76132, TPS76133, TPS76138, TPS76150 LOW-POWER 100-mA LOW-DROPOUT LINEAR REGULATORS SLVS178B – DECEMBER 1998 – REVISED MAY 2001 TYPICAL CHARACTERISTICS TPS76130 TPS76133 OUTPUT VOLTAGE vs OUTPUT CURRENT OUTPUT VOLTAGE vs OUTPUT CURRENT 3.02 3.32 VI = 4 V CI = CO = 4.7 µF TA = 25°C 3.01 3 3.3 VO – Output Voltage – V VO – Output Voltage – V VI = 4.3 V CI = CO = 4.7 µF TA = 25°C 3.31 2.99 2.98 2.97 2.96 2.95 3.29 3.28 3.27 3.26 3.25 2.94 3.24 0 20 40 60 80 100 120 0 20 40 IO – Output Current – mA Figure 1 80 100 120 Figure 2 TPS76150 TPS76130 OUTPUT VOLTAGE vs OUTPUT CURRENT OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE 3.02 5.03 3.01 VI = 6 V CI = CO = 4.7 µF TA = 25°C 5.02 IL = 1 mA 3 VO – Output Voltage – V 5.01 VO – Output Voltage – V 60 IO – Output Current – mA 5 4.99 4.98 4.97 2.99 2.98 2.97 2.96 2.94 2.93 4.96 IL = 100 mA 2.95 VI = 4 V CI = CO = 4.7 µF 2.92 4.95 0 20 40 60 80 100 120 2.91 –60 –40 –20 0 20 40 60 80 100 120 140 TA – Free-Air Temperature – °C IO – Output Current – mA Figure 3 Figure 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 TPS76130, TPS76132, TPS76133, TPS76138, TPS76150 LOW-POWER 100-mA LOW-DROPOUT LINEAR REGULATORS SLVS178B – DECEMBER 1998 – REVISED MAY 2001 TYPICAL CHARACTERISTICS TPS76133 TPS76150 OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE 3.32 5.02 3.31 IL = 1 mA 3.28 3.27 3.26 IL = 100 mA 3.25 3.24 VO – Output Voltage – V VO – Output Voltage – V 3.29 3.23 VI = 4.3 V CI = CO = 4.7 µF 4.98 4.96 IL = 100 mA 4.94 4.92 3.22 3.21 –60 –40 –20 0 20 40 IL = 1 mA 5 3.3 60 VI = 6 V CI = CO = 4.7 µF 4.9 –60 –40 –20 80 100 120 140 TA – Free-Air Temperature – °C 0 Figure 5 60 80 100 120 140 TPS76130 TPS76133 GROUND CURRENT vs FREE-AIR TEMPERATURE GROUND CURRENT vs FREE-AIR TEMPERATURE 104 VI = 4 V CI = CO = 4.7 µF IL = 100 mA IL = 50 mA 103 IL = 1 mA 102 101 –60 –40 –20 0 20 VI = 4.3 V CI = CO = 4.7 µF 40 60 80 100 120 140 IL = 100 mA Ground Current – µ A Ground Current – µ A 40 Figure 6 104 IL = 50 mA 103 IL = 1 mA 102 101 –60 –40 –20 0 20 40 Figure 7 Figure 8 POST OFFICE BOX 655303 60 80 100 120 140 TA – Free-Air Temperature – °C TA – Free-Air Temperature – °C 6 20 TA – Free-Air Temperature – °C • DALLAS, TEXAS 75265 TPS76130, TPS76132, TPS76133, TPS76138, TPS76150 LOW-POWER 100-mA LOW-DROPOUT LINEAR REGULATORS SLVS178B – DECEMBER 1998 – REVISED MAY 2001 TYPICAL CHARACTERISTICS OUTPUT NOISE vs FREQUENCY TPS76150 GROUND CURRENT vs FREE-AIR TEMPERATURE 10–5 104 Vn – Output Voltage Noise – V/ Hz VI = 6 V CI = CO = 4.7 µF Ground Current – µ A IL = 100 mA IL = 50 mA 103 IL = 1 mA 102 101 –60 –40 –20 CL = 2.2 µF IL = 100 mA CL = 2.2 µF IL = 1 mA 10–6 CL = 10 µF IL = 100 mA CL = 10 µF IL = 1 mA 10–7 10–8 102 0 20 40 60 103 80 100 120 140 104 105 f – Frequency – Hz TA – Free-Air Temperature – °C Figure 9 Figure 10 TPS76130 OUTPUT IMPEDANCE vs FREQUENCY DROPOUT VOLTAGE vs FREE-AIR TEMPERATURE 103 300 VI = EN = 2.9 V CI = CO = 4.7 µF CL = 2.2 µF IL = 50 mA CL = 2.2 µF IL = 1 mA 101 250 VDO – Dropout Voltage – mV Zo – Output Impedance – Ω 102 CL = 2.2 µF IL = 100 mA CL = 10 µF IL = 1 mA 100 10–1 10–2 101 CL = 10 µF IL = 100 mA 102 CL = 10 µF IL = 50 mA 103 104 IL = 100 mA 200 150 100 50 105 106 IL = 50 mA IL = 0 mA 0 –60 –40 –20 0 IL = 1 mA 20 40 60 80 100 120 140 TA – Free-Air Temperature – °C f – Frequency – Hz Figure 11 Figure 12 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 7 TPS76130, TPS76132, TPS76133, TPS76138, TPS76150 LOW-POWER 100-mA LOW-DROPOUT LINEAR REGULATORS SLVS178B – DECEMBER 1998 – REVISED MAY 2001 TYPICAL CHARACTERISTICS 7 CO = 4.7 µF IL = 100 mA 6 5 4 TPS76130 LOAD TRANSIENT RESPONSE I O – Output Current – mA VI – Input Voltage – V TPS76130 LINE TRANSIENT RESPONSE 10 0 –10 – 20 –50 CO = 4.7 µF 30 20 10 100 ∆ VO – Change in Output Voltage – mV ∆ VO – Change in Output Voltage – mV 20 40 0 50 50 0 –50 – 100 –300 –200 –100 100 150 200 250 300 350 400 450 t – Time – µs 100 200 300 400 500 600 700 t – Time – µs Figure 14 Figure 13 TPS76150 LOAD TRANSIENT RESPONSE I O – Output Current – mA TPS76150 LINE TRANSIENT RESPONSE VI – Input Voltage – V 0 8 7 6 30 20 30 CO = 4.7 µF 20 10 0 ∆ VO – Change in Output Voltage – mV ∆ VO – Change in Output Voltage – mV 100 10 0 –10 – 20 –30 –50 CO = 4.7 µF IL = 100 mA 0 50 100 150 200 250 300 350 400 450 t – Time – µs 50 0 –50 – 100 –300 –200 –100 0 Figure 16 Figure 15 8 100 200 300 400 500 600 t – Time – µs POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 700 TPS76130, TPS76132, TPS76133, TPS76138, TPS76150 LOW-POWER 100-mA LOW-DROPOUT LINEAR REGULATORS SLVS178B – DECEMBER 1998 – REVISED MAY 2001 APPLICATION INFORMATION 1 IN CI = 1 µF EN 5 TPS761xx OUT Co = 4.7 µF 3 2 GND Figure 17. TPS761xx Typical Application over current protection The over current protection circuit forces the TPS761xx into a constant current output mode when the load is excessive or the output is shorted to ground. Normal operation resumes when the fault condition is removed. NOTE: An overload or short circuit may also activate the over temperature protection if the fault condition persists. over temperature protection The thermal protection system shuts the TPS761xx down when the junction temperature exceeds 160°C. The device recovers and operates normally when the temperature drops below 150°C. input capacitor A 1-µF or larger ceramic decoupling capacitor with short leads connected between IN and GND is recommended. The decoupling capacitor may be omitted if there is a 1 µF or larger electrolytic capacitor connected between IN and GND and located reasonably close to the TPS761xx. However, the small ceramic device is desirable even when the larger capacitor is present, if there is a lot of high frequency noise present in the system. output capacitor Like all low dropout regulators, the TPS761xx requires an output capacitor connected between OUT and GND to stabilize the internal control loop. The minimum recommended capacitance value is 4.7 µF and the ESR (equivalent series resistance) must be between 0.1 Ω and 10 Ω. Solid tantalum electrolytic, aluminum electrolytic, and multilayer ceramic capacitors are all suitable, provided they meet the requirements described above. Most of the commercially available 4.7-µF surface-mount solid-tantalum capacitors, including devices from Sprague, Kemet, and Nichicon, meet the ESR requirements stated above. Multilayer ceramic capacitors should have minimum values of 4.7 µF over the full operating temperature range of the equipment. enable (EN) A logic zero on the enable input shuts the TPS761xx off and reduces the supply current to less than 1 µA. Pulling the enable input high causes normal operation to resume. If the enable feature is not used, EN should be connected to IN to keep the regulator on all of the time. The EN input must not be left floating. reverse current path The power transistor used in the TPS761xx has an inherent diode connected between IN and OUT as shown in the functional block diagram. This diode conducts current from the OUT terminal to the IN terminal whenever IN is lower than OUT by a diode drop. This condition does not damage the TPS761xx provided the current is limited to 150 mA. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 9 PACKAGE OPTION ADDENDUM www.ti.com 24-Jan-2013 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Qty Drawing Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (°C) Top-Side Markings (3) (4) TPS76130DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM PAEI TPS76130DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM PAEI TPS76130DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM PAEI TPS76130DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM PAEI TPS76132DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM PAFI TPS76132DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM PAFI TPS76132DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM PAFI TPS76132DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM PAFI TPS76133DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM PAII TPS76133DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM PAII TPS76133DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM PAII TPS76133DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM PAII TPS76138DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM PAKI TPS76138DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM PAKI TPS76138DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM PAKI TPS76138DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM PAKI TPS76150DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM PALI Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 24-Jan-2013 Status (1) Package Type Package Pins Package Qty Drawing Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (°C) Top-Side Markings (3) (4) TPS76150DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM PALI TPS76150DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM PALI TPS76150DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM PALI (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) Only one of markings shown within the brackets will appear on the physical device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 Samples PACKAGE MATERIALS INFORMATION www.ti.com 11-Mar-2008 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel Diameter Width (mm) W1 (mm) TPS76130DBVR SOT-23 DBV 5 3000 180.0 A0 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS76130DBVT SOT-23 DBV 5 250 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS76132DBVR SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS76132DBVT SOT-23 DBV 5 250 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS76133DBVR SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS76133DBVT SOT-23 DBV 5 250 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS76138DBVR SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS76138DBVT SOT-23 DBV 5 250 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS76150DBVR SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS76150DBVT SOT-23 DBV 5 250 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 11-Mar-2008 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TPS76130DBVR SOT-23 DBV 5 3000 182.0 182.0 20.0 TPS76130DBVT SOT-23 DBV 5 250 182.0 182.0 20.0 TPS76132DBVR SOT-23 DBV 5 3000 182.0 182.0 20.0 TPS76132DBVT SOT-23 DBV 5 250 182.0 182.0 20.0 TPS76133DBVR SOT-23 DBV 5 3000 182.0 182.0 20.0 TPS76133DBVT SOT-23 DBV 5 250 182.0 182.0 20.0 TPS76138DBVR SOT-23 DBV 5 3000 182.0 182.0 20.0 TPS76138DBVT SOT-23 DBV 5 250 182.0 182.0 20.0 TPS76150DBVR SOT-23 DBV 5 3000 182.0 182.0 20.0 TPS76150DBVT SOT-23 DBV 5 250 182.0 182.0 20.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2013, Texas Instruments Incorporated