PD2601 AC Solid State Relays AC Operating Voltage Load Current On-State Voltage Drop PD2601 Units 260 1 VRMS A VRMS 1.2 (AT IL = IA) Features • Load Current up to 1A • Blocking Voltage to 600V • 5mA Sensitivity • Zero-Crossing Detection • DC Control, AC Output • Optically Isolated • TTL and CMOS Compatible • Low EMI and RFI Generation • High Noise Immunity • VDE compatible • Machine Insertable, Wave Solderable Description The PD2601 is an AC Solid State Switch using optical coupling with dual power SCR outputs to produce an alternative to optocoupler and Triac circuits. The PD2601 switches are robust enough to provide a blocking voltage of up to 600V and max surge current rating of 20A. In addition, tightly controlled zero cross circuitry ensures switching of AC loads without the generation of transients. The input and output circuits are optically coupled to provide 3750V of isolation and noise immunity between control and load circuits. As a result the PD2601 is well suited for industrial environments where electromagnetic interference would disrupt the operation of electromechanical relays. Approvals • UL recognized file #: E69938 • CSA certified file #: LR 43639-8 Ordering Information Applications • Programmable Control • Process Control • Power Control Panels • Remote Switching • Gas Pump Electronics • Contractors • Large Relays • Solenoids • Motors • Heaters Part # PD2601 Description 16 Pin DIP (25/Tube) Pin Configuration PD2601 Pinout Ð LED 1 16 + LED ZC 10 AC Load DS-PD2601-R9 www.clare.com 8 AC Load 1 PD2601 Absolute Maximum Ratings (@ 25˚ C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Package Dissipation PD Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.) 1 Derate Linearly 1.33 mW/˚C 2 Derate Linearly 16.6 mW/˚C Min - Typ Max Units - 1501 mW 50 mA 1 A 5 V - - 16002 mW 3750 -40 -40 - VRMS +85 °C +125 °C - - +260 +220 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. °C °C Electrical Characteristics Parameters Output Characteristics @ 25°C Peak Blocking Voltage Load Current (Continuous) Off State Leakage Current On-State Voltage Drop Critical Rate of Rise Switching Speeds Turn-on Turn-off Zero-Cross Turn-On Voltage Operating Frequency1 Load Power Factor for Guaranteed Turn-On2 Capacitance Input to Output Input Characteristics @ 25°C Input Control Current For Normal Environment For High Noise Environment Input Voltage Drop Input Drop-out Voltage Reverse Input Current Common Characteristics @ 25°C Input to Output Capacitance Input to Output Isolation 2 1 Zero cross 1st 1/2 cycle @ <100Hz 2 Snubber circuits may be required at low power factors. Conditions Symbol Min Typ Max Units VL=120-240VAC VDRM IL=1A dv/dt VDRM IL ILEAK 0.005 1000 1200 600 1 1 1.2 - V A mA VRMS V/µS IF=5 mA IF=5 mA 1st half cycle Sub. half cycle - TON TOFF 20 2 - 0.5 0.5 5 1 500 Cycles Cycles V V Hz - PF - 0.25 - 3 - pF IF=5mA VR=5V IF IF VF IR 5 10 0.9 0.8 - 1.2 - 50 100 1.4 10 mA mA V V uA - CI/O VI/O 3750 - 3 - VRMS VRMS www.clare.com Rev. 9 PD2601 PERFORMANCE DATA* Peak Surge Current (A) Load Current (A) 1.0 0.8 RΘJA = 60°C/W 0.6 0.4 0.2 NOTE: Values apply to TJ = 50°C before Surge 20 15 10 5 0 -40 0 55 16 85 Ambient Temperature (°C) 50 100 2.0 1.5 1.0 0.5 10 25 50 75 100 125 150 Ambient Temperature (°C) Pulse Duration (ms) PD2601 Typical dv/dt vs. Temperature Critical Rate of Rise (V/µs) PD2601 Typical Forward Voltage vs. Temperature PD2601 Max. Surge Current (Non-Repetitive) Forward Voltage (V) PD2601 Load Current, Free Air 1.2 PD2601 dv/dt Method Vo 1200 1000 800 Vo = 300V dv 0.63 x 300V dt RC 63% 600 10% 200 0 25 50 189 RC In accordance with EIA/NARM Standards RS-443 for Solid State Relays 400 85 RC Ambient Temperature (°C) Mechanical Dimensions 16 Pin DIP 6.350 ± .127 (.250 ± .005) 19.202 ± .381 (.756 ± .015) 3.429 TYP. (.135) 7.620 ± .254 (.300 ± .010) 15.240 TYP. (.600) .508 TYP. (.020) 17.780 TYP. (.700) The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 9 www.clare.com 3 Worldwide Sales Offices CLARE LOCATIONS EUROPE ASIA/PACIFIC Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 http://www.clare.com Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person. Specification: DS-PD2601-R9 ©Copyright 2000, Clare, Inc. All rights reserved. Printed in USA. 3/23/01