• High brightness surface mount LED. • Designed for sideway illumination. • Small package outline. • Qualified according to JEDEC moisture sensitivity Level 2. • Compatible to both IR reflow soldering and TTW soldering. Part Ordering Number Chip Technology / Color λdom ( nm ) AlInGaP / Super-red, 632 nm 120 AlInGaP / Red, 625 nm 120 Luminous Intensity @ If = 20mA Iv ( mcd ) 45.0 … 112.5 45.0 … 56.0 56.0 … 71.5 71.5 … 90.0 90.0 … 112.5 45.0 … 112.5 45.0 … 56.0 56.0 … 71.5 71.5 … 90.0 90.0 … 112.5 71.5 … 180.0 71.5 … 90.0 90.0 … 112.5 112.5 … 140.0 140.0 … 180.0 71.5 … 180.0 71.5 … 90.0 90.0 … 112.5 112.5 … 140.0 140.0 … 180.0 TS AlInGaP / 180.0 … 450.0 Red, 625 nm 180.0 … 224.0 224.0 … 285.0 285.0 … 355.0 355.0 … 450.0 AlInGaP / Amber, 615 nm 120 71.5 … 180.0 71.5 … 90.0 90.0 … 112.5 112.5 … 140.0 140.0 … 180.0 112.5 … 285.0 112.5 … 140.0 140.0 … 180.0 180.0 … 224.0 224.0 … 285.0 Part Ordering Number Chip Technology / Color λdom ( nm ) AlInGaP / 120 Luminous Intensity @ If = 20mA Iv ( mcd ) Orange, 605 nm 71.5 … 180.0 71.5 … 90.0 90.0 … 112.5 112.5 … 140.0 140.0 … 180.0 112.5 … 285.0 112.5 … 140.0 140.0 … 180.0 180.0 … 224.0 224.0 … 285.0 AlInGaP / 120 Yellow, 587 nm 71.5 … 180.0 71.5 … 90.0 90.0 … 112.5 112.5 … 140.0 140.0 … 180.0 112.5 … 285.0 112.5 … 140.0 140.0 … 180.0 180.0 … 224.0 224.0 … 285.0 AlInGaP / 120 Green, 572 nm 45.0 … 90.0 45.0 … 56.0 56.0 … 71.5 71.5 … 90.0 90.0 … 112.5 NOTE: 1. All part number above comes in a standard quantity of 2500 units per reel. 2. Other luminous intensity groups are also available upon request. 3. Luminous intensity is measured with an accuracy of ±11%. 4. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 5. Vf binning is optional. Vf binning scheme is as per the following table. Please contact marketing for special part number. Wavelength Grouping. Color Group Wavelength distribution (nm) BL-PSS; Super Red Full 625 - 640 BL-PSR-CS, -SS; Red (AS) Full 620 – 630 BL-PSR-TS; Red (TS) BL-PSA; Amber BL-PSO; Orange BL-PSY; Yellow BL-PSG; Green 620 - 635 Full 610 – 621 W 610 – 615 X 615 – 621 Full 600 – 612 W 600 – 603 X 603 – 606 Y 606 - 609 Z 609 - 612 Full 582 - 594 W 582 - 585 X 585 - 588 Y 588 - 591 Z 591 - 594 Full 564.5 – 576.5 W 564.5 – 567.5 X 567.5 – 570.5 Y 570.5 – 573.5 Z 573.5 – 576.5 Dominant wavelength is measured with an accuracy of ±1 nm. Vf Binning (Optional). Vf Bin @ 20mA Forward voltage (V) 01 1.55 … 1.85 02 1.85 … 2.15 03 2.15 … 2.45 04 2.45 … 2.75 Forward voltage, Vf is measured with an accuracy of ± 0.1 V. Absolute Maximum Ratings Maximum Value Unit DC forward current. 20 mA Peak pulse current; (tp ≤ 10 µs, Duty cycle = 0.005) 200 mA Reverse voltage. 12 V ESD Threshold; HBM 2000 V LED junction temperature. 125 °C Operating temperature. -40 … +100 °C Storage temperature. -40 … +100 °C 50 mW Power dissipation ( at room temperature ) Recommended Solder Pad Relative luminous intensity vs. forward current. Forward current vs. forward voltage. Intensity vs. DC Forward Current Forward Current (mA) vs. Forward Voltage 30 2 1.8 Forward Current (mA) Relative intensity. Normalized at 20 mA. 35 2.2 1.6 1.4 1.2 1 0.8 0.6 0.4 25 AS AlInGaP 20 15 TS AlInGaP 10 5 0.2 0 0 0 10 20 30 40 50 1.2 60 1.4 1.6 FORWARD CURRENT (mA) Radiation pattern. 30° 20° 1.8 2 2.2 2.4 2.6 Forward Voltage (V) Maximum current vs. ambient temperature 10° 0° 25 1.0 40° 20 Forward Current, If 0.8 0.6 50° 0.4 60° 15 10 5 70° 0.2 0 80° 0 0 90° Relative Spectra Emission 1.0 0.9 Orange Relative Intensity 0.8 Red 0.7 Super Red 0.6 Green Hyper Red 0.4 0.3 0.2 0.1 0.0 500 550 600 650 Wavelength (nm) 20 30 40 50 60 Ambient Temperature Relative Intensity vs. Wavelength 0.5 10 700 750 800 70 80 90 100 Taping And Orientation. Reels come in quantity of 2500 units. Reel diameter is 180 mm. Recommended Sn-Pb IR-Reflow Soldering Profile. Classification Reflow Profile (JEDEC J-STD-020C) 275 250 235-240oC 10-30s Temperature (oC) 225 200 Ramp-up 3 oC/sec o 183 C 175 60-150s 150 125 Ramp-down 6 oC/sec max. 100 Preheat 60-120s 75 50 360s max 25 0 50 100 150 200 Time (sec) Recommended Pb Free IR-Reflow Soldering Profile. Classification Reflow Profile (JEDEC J-STD-020C) 300 275 o Temperature ( C) 250 Ramp-up 3 oC/sec max. 217 oC 225 255-260oC 10-30s 200 60-150s 175 150 125 Ramp-down 6 oC/sec max. 100 Preheat 60-180s 75 50 480s max 25 0 50 100 Time (sec) 150 200