Component Carriers and Housings 292 Component Carriers and Housings Weidmüller EG 4 housing are suitable for the installation of electronic components with a maximum diameter or width of 4.5 mm. Four independent clamping yoke screw connections are available. A snap-on frame expands the installation space in the DK4 by 6 mm respectively. Depending on type, these modular terminals are suitable for mounting on TS 32, TS 35 x 7.5 or TS 35 x 15 mounting rails according to European standards EN 50 035 and EN 50 022. as type EG 3, offers the same width of 22.5 mm. However, the greater installation depth (75 mm) and height (109 mm) allow the installation of more complex circuit configurations. The built-in installation can be connected via 6 screw connections. The snap-on combination foot allows the terminal to be mounted on TS 32, TS 35 x 7.5 or TS 35 x 15 mounting rails. Due to the sliding foot construction, the EG 4 can be slid forwards or backwards on the locking foot, and can be turned through 180° (e.g. exchanging of input and output). Weidmüller housings type WAVEBOX It is essential to provide fit-for-use housings for modern electronic components. Setting and control functions must be easily carried out and technical requirements with respect to heat dissipation and EMV properties should be supported. An ideal design saves space and wiring costs in the switchgear cabinet. In addition, ergonomics and design are becoming increasingly important for highquality electronic products. These are the criteria that led to the development of WAVEBOX. Simplified producWeidmüller WDK 2.5 terminals tion methods (shaft soldering, SMD) ensure are suitable for the installation of electrical cost-savings for the customer. components with a maximum width of 4 The WAVEBOX is characterised by: Weidmüller EG 5 housings mm. As many as four independent clamp• Optimum width for any application ing yoke screw connections or 4 6.3 x 0.8 correspond to type EG 4. The EG 5 has (12.5 mm, 17.5 mm, 22.5 mm) tab connections are available. These termi- 12 screw connections, which can be wired • Large component assembly surface; nals are suitable for mounting on TS 35 x with solder lugs inside the housing. The SMDs can be mounted on the solder 7.5 or TS 35 x 15 mounting rails. snap-on combination foot allows the terside minal to be mounted on TS 32, TS 35 x • UL94 flammability class V2 7.5 or TS 35 x 15 mounting rails. Due to • No tools required for assembly Weidmüller EG 1 housings the sliding foot construction, the EG 4 can • Plug-in printed circuit board offer 4 screw connections and, as accesbe slid 6 mm forwards or backwards on • Plug-in cross-connection via ZQV 2.5 N sories, up to 4 0.8 x 4.8 mm solder/tab the engaging foot and can be turned • Hinged, transparent cover connections on a width of 18 mm. The through 180° (e.g. exchanging input and • BLZ 5.08 screw/plug and socket conscrew clamp busbar ends with a solder output). nector ring inside the housing. Two end plates • BLFZ 5.08 optional tension clamp/plug seal the module. Depending on type, the and socket connector Weidmüller EG 6 housings modules are mounted on TS 32, TS 35 x • Marking option with WS tags 7.5 or TS 35 x 15 mounting rails. have a bus-suitable contact carrier. The • Mounts onto TS 35 bus connection is created by directly Weidmüller individual parts for RS 70 mounting several housings in a row. 32 locking socket Weidmüller EG 2 housings connections are available on both sides of latch together to form units from 20 mm in The external shape of these housings cor- the housing as crimp connector block width. Any desired intermediate parts or responds to Type EG 1. Four screw concontacts. The housing accepts printed cirfeet can be connected between two side nections or up to 8 0.8 x 6.6 mm/0.8 x cuit boards with dimensions of 100 x 120 pieces (locking feet) at intervals of 5 mm. In 2.8 mm tab connectors are connected mm. The printed circuit board is adapted this way, a carrier module is constructed with a printed circuit board in the housing. with a VG 64 DIN strip. The front panel is for PCB, on which various components They can be mounted on TS 32, TS 35 x screwed onto the circuit board similar to can be soldered. The assembly snaps onto 7.5 or TS 35 x 15 mounting rails. the 19" technology. The locking foot TS 32, TS 35 x 7.5 or TS 35 x 15 mountallows easy mounting onto the TS 35 ing rails. mounting rail. Weidmüller EG 3 housings The Weidmüller RSX custom circuit provides 6 screw connections or 12 module Weidmüller SEG/U housing 0.8 x 6.3 mm/0.8 x 2.8 mm tab connecis a largely prefabricated unit wich accepts tions on a width of 22.5 mm. As an acces- enable the plug-in module assembly of a up to 5 components such as resistors, sory, Weidmüller offers a shaped printed 70 x 52 x 1 mm printed circuit board. The diodes, varistors or capacitors via soldering circuit board with a 2.54 mm hole grid circuit board is attached to the accessory terminals. The components are connected or fully copper-coated. The engagable cover plate via snap-in hooks. The housing via screw clamps or tab connections. This combination foot allows the terminal to contains a 13-pole socket block for instal- module is also suitable for mounting on TS be mounted on TS 32, TS 35 x 7.5 lation of the module; 6 screw connections 32, TS 35 x 7.5 or TS 35 x 15 mounting or TS 35 x 15 mounting rails. are available for connection. The permissi- rails. The MPL mounting plate is used to mount ble power loss in the housing during conWeidmüller locking socket profiles the housing directly (without mounting rail). tinuous operation of terminals in rows The RS 45, RS 80 and RS 100 profiles are Due to the sliding foot construction, the amounts to 1.5W, depending on the suravailable as 2 m long strips. The extruded EG 3 can be turned through 180° in all face temperature of the soldered compoprofiles can be easily cut to any length with types of assembly (e.g. exchanging input nents. The snap-on combination foot and output). allows the housings to be mounted on TS a saw. In this way, a carrier module is constructed for a printed circuit board on 32, TS 35 x 7.5 or TS 35 x 15 mounting which various components can be solderrails. ed. Locking feet can be slid into these profiles for mounting on TS 32, TS 35 x 7.5 or TS 35 x 15 mounting rails. The sliding foot construction of the RS 80 also allows the fixing foot be turned through 180°. 293 Housings Weidmüller DK 4 and DKT 4 terminals Housings Terminals Dimensions Terminal width (+fitting tolerance 0.2) Insulating stripping length Connection data Screw connection, solid Screw connection, stranded Conductor cross-section Tightening torque range Torque phase with DMS 2 electric screwdriver Rated data acc. to VDE Rated cross-section Rated voltage Rated current Power loss DK 4 DKT 4 6 mm 6 mm 9 mm 9 mm 0.5…4 mm2 0.5…4 mm2 AWG 22…12 0.5-1.0 Nm 1 0.5…4 mm2 0.5…4 mm2 AWG 22…17 0.5 - 1.0 Nm 1 4 mm2 380 V~ 10 A 0.5 W 4 mm2 380 V~ 10 A 0.5 W Connection diagram Ordering data Terminal for TS 32 Y Type Cat. No. for TS 35 W Type Cat. No. Matching contour frame for TS 32 Y Type Cat. No. for TS 35 W Type Cat. No. Accessories Mounting rail (2 m lenghts) End bracket for TS 32 (thickness mm) for TS 35 End plate (thickness mm) Partition Socket for test plug Test plug (pin diameter) Cross-connection 2-pole (preassembled) 3-pole 4-pole 10-pole Switchable cross-connection bracket Connection sleeve Fixing screw Cover plate (4 terminals) Fixing screw (plastic) Cross connection bridge DK 4 PA 1537960000 DK 4/35 PA 8203490000 DK 4 PA 1115460000 DK 4/35 PA 1115560000 DK 4 RA 0690960000 DK 4 RA/35 0691060000 Type TS 32 TS 35 x 7.5 TS 35 x 15 EWK 1 (8.5) EW 35 (8.5) AP PA (1.5) TSch 4 StB 8.5 PS (ø 2.3) Q2 Q3 Q4 Q 10 VL 2 VH 10 BS M 2.5 x 14 AD 4 BSK M 2.5 x 18 QB 2* QB 3* QB 4* QB 75 blank* Insulation profile DK 4 RA 0690960000 DK 4 RA/35 0691060000 Cat. No. 0122800000 0383400000 0498000000 0206160000 0383560000 0359260000 0363360000 0215700000 0180400000 0336400000 0336500000 0336600000 0368600000 0446700000 0446600000 0266800000 0303400000 0303300000 0482700000 0482800000 0482900000 0526400000 0526700000 * Accessories see terminals catalogue 294 Qty. 2m 2m 2m 50 50 20 100 50 20 50 50 50 20 – 100 100 50 100 100 50 50 10 – DKT 4 PA 1686940000 DKT 4 /35PA 0687460000 DKT 4 PA 1115660000 DKT 4/35 PA 1115760000 Type TS 32 TS 35 x 7.5 TS 35 x 15 EWK 1 (8.5) EW 35 (8.5) AP PA (1.5) TSch 4 Cat. No. 0122800000 0383400000 0498000000 0206160000 0383560000 0687560000 0363360000 Qty. 2m 2m 2m 50 50 20 100 QB 2* QB 3* QB 4* QB 75 blank* Insulation profile 0482700000 0482800000 0482900000 0526400000 0526700000 100 50 50 10 – Terminals WDK 2.5 Dimensions Terminal width (+fitting tolerance 0.2) Insulating stripping length Connection data Screw connection, solid Screw connection, stranded Conductor cross-section Tightening torque range Torque phase with DMS 2 electric screwdriver Rated data acc. to VDE Rated cross-section Rated voltage Rated current Power loss WDK 2.5 F WDK 2.5 FF 5 mm 5 mm 5 mm 5 mm 10 mm 10 mm 10 mm – 0.5…4 mm2 0.5…2.5 mm2 AWG 26…4 0.4 - 0.7 Nm 1 0.5…4 mm2 0.5…2.5 mm2 AWG 26…4 0.5…4 mm2 0.5…2.5 mm2 AWG 26…4 0.4 - 0.7 Nm 1 2.5 mm2 380 V~ 26 A 0.5 W Housings Housings 2.5 mm2 380 V~ 12 A (2 x 6 A) 0.5 W 1 mm2 380 V~ 12 A (2 x 6 A) 0.5 W WDK 2.5 F 1021600000 WDK 2.5 FF 1021700000 WZR WDK 2.5 1074000000 Type Cat. No. Qty. TS 35 x 7.5 0383400000 2 m slotted 0514500000 2 m TS 35 x 15 0498000000 2 m WZR WDK 2.5 1074000000 Type Cat. No. Qty. TS 35 x 7.5 0383400000 2 m slotted 0514500000 2 m TS 35 x 15 0498000000 2 m WZR WDK 2.5 1074000000 Type Cat. No. Qty. TS 35 x 7.5 0383400000 2 m slotted 0514500000 2 m TS 35 x 15 0498000000 2 m EW 35 (8.5) 0383560000 50 WAP 1059100000100 EW 35 (8.5) 0383560000 50 WAP 1059100000100 EW 35 (8.5) 0383560000 50 WAP 1059100000100 WQV WQV WQV WQV WQV WQV WQV WQV WQV WQV WQV WQV Connection diagram Ordering data Terminal for TS 32 Y Type Cat. No. for TS 35 W Type Cat. No. Matching contour frame for TS 32 Y Type Cat. No. for TS 35 W Type Cat. No. Accessories Mounting rail (2 m lenghts) End bracket (thickness mm) for TS 35 End plate (thickness mm) Cross-connection (preassembled) 2-pole 3-pole 4-pole 10-pole WDK 2.5 1023200000 2.5 2.5 2.5 2.5 WDK 2.5 1023100000 1053660000 1053760000 1053860000 1054460000 50 50 50 50 2.5 2.5 2.5 2.5 1053660000 1053760000 1053860000 1054460000 50 50 50 50 2.5 2.5 2.5 2.5 1053660000 1053760000 1053860000 1054460000 50 50 50 50 295 Housings Housings Rated data Reference voltage acc. to VDE 0110 1/89 Pollution severity Overvoltage category Current Power loss (when mounted in row) Protection class Flammability acc. to UL level Upper temperature limit Connection data Screw connection solid Screw connection stranded Tightening torque range Torque phase with DMS 2 electric srewdriver Ordering data Housing frame End plate Combi foot, latchable Assembly plate Clamping yoke unit, right Clamping yoke unit, left Intermediate plate Connection spigot Connection tab 0.8 x 6.3 mm Connection tab 2 x 0.8 x 2.8 mm Tab / solder lug 0.8 x 2.8 mm Tab / solder lug 0.8 x 4.8 mm Printed circuit board, copper-coated Printed circuit board 5.08 pitch Dimensions see page 296 EG 1 EG 2 300 V 2 II 10 A 1W IP 20 V-2 100 °C 300 V 2 II 10 A 1W IP 20 V -2 100 °C 0.5...4 mm2 0.5...2.5 mm2 0.5 - 1.0 Nm 2 0.5...4 mm2 0.5...2.5 mm2 0.5 - 1.0 Nm 2 Type EG 32/1 for TS 32 EG 35/1 for TS 35 AP PA Cat. No. 0453560000 0453860000 0453660000 Qty. 20 20 20 Type EG 2 R Cat. No. 0508860000 Qty. 20 AP PA 0453660000 20 0495960000 0495860000 0453760000 0510260000 20 20 20 50 0496100000 0163500000 100 50 ZP VZ 0453760000 0510260000 20 50 ZB-R ZB-L ZP VZ S 2.8 S 4.8 0475800000 0475700000 20 20 S 6.3 S 2 x 2.8 306, Fig. I 306, Fig. II Housings EG 4 EG 5 300 V 2 II 10 A 1.5 W IP 20 V-2 100 °C 300 V 2 III 10 A 1.6 W IP 20 V-2 100 °C 300 V 2 III 1A 1.6 W IP 20 V-2 100 °C 0.5...4 mm2 0.5...2.5 mm2 0.4 - 0.8 Nm 1 0.5...4 mm2 0.5...2.5 mm2 0.4 - 0.8 Nm 1 0.5...4 mm2 0.5...2.5 mm2 0.5 - 0.8 Nm 1 Housings EG 3 Type EG 3 R Cat. No. 0163960000 Qty. 15 AP PA RKF MPL ZBE ZBE VZ 0133760000 0163860000 0158560000 0138360000 0138360000 0510260000 20 20 50 50 50 50 S 6.3 S 2 x 2.8 0496100000 0163500000 100 50 LP-CU LP-LR 0167300000 0167400000 – – 307, Fig. V Type EG 4 R Cat. No. 1116560000 Qty. – AP PA RKF MPL ZBE ZBE VZ ZP 1116060000 1116260000 1116360000 0138360000 0138360000 0510260000 0453760000 20 20 50 50 50 50 – 307, Fig. VI Type EG 5 R Cat. No. 1116860000 Qty. – AP PA RKF MPL ZBE ZBE VZ ZP 1116160000 1116260000 1116360000 0138360000 0138360000 0510260000 0453760000 20 20 50 50 50 50 – 307, Fig. VII 297 Housings Housings for pluggable printed circuit boards WAVEBOX S 22.5 Housing version Polyamide PA 6.6 Flammability class U2 (UL 94) Colour WAVEBOX L 22.5 grey Notes: BLZ may only be actuated with the supply disconnected. If small power ratings need to be switched for operating reasons, empirical values are available on request. Description Housing base completely assembled with locking foot, not cross-connectable Housing base completely assembled with locking foot, crossconnectable Top part with transparent cover/top unit Pin header 5.08/3-pole orange; right Pin header 5.08/3-pole orange; left Connector socket 2-pole for BLZ 5.08/2 screw terminal Type Cat. No. Qty. Type Cat. No. Qty. WAVEBOX S 22.5 8426440000 10 WAVEBOX L 22.5 8426470000 10 WAVEBOX S 22.5 QV Head 8426450000 8426460000 10 10 WAVEBOX L 22.5 QV 8426480000 8426490000 10 10 Pin header Pin header 8426620000 8426630000 10 10 8426620000 8426630000 10 10 Connector socket Connector socket 1526560000 1526510000 100 100 1526560000 1526510000 100 100 Connector socket Connector socket 1707470000 1707700000 100 100 1707470000 1707700000 100 100 ZQV 2.5N/2 black ZQV 2.5N/2 red ZQV 2.5N/2 blue ZQV 2.5N/2 yellow Coding element Coding element 1718080000 1717900000 1717990000 1693800000 1545710000 1573010000 60 60 60 60 100 100 1718080000 1717900000 1717990000 1693800000 1545710000 1573010000 60 60 60 60 100 100 - orange - black Other colours are available on request Connector socket 3-pole for BLZ 5.08/3 terminal - orange - black Other colours are available on request Connector socket 2-pole for BLZ 5.08/3 tension clamp terminal - orange - black Connector socket 3-pole for BLZ 5.08/3 tension clamp terminal - orange - black Accessories Cross-connection ZQV 2.5N/2 black Cross-connection ZQV 2.5N/2 red Cross-connection ZQV 2.5N/2 blue Cross-connection ZQV 2.5N/2 yellow Coding elements for BLZ BLZ KO black Coding elements for BLZ BLZ KO orange WS connector marker WS15/5 Multicard* WS10/5 Multicard * WS10/5 Neutral* - - Screw cap Power loss, arranged side by side, type 2.2 W/40 °C - Ordering example WAVEBOX S 22.5 Housing base completely assembled with locking foot, not cross-connectable Top part with transparent cover/top unit Pin header 5,08/3-pole orange; right Pin header 5.08/3-pole orange; left Connector socket 3-pole for BLZ 5.08/3 screw terminal, orange * Marker see page 317 + 318 Attention! These WAVEBOX-housings are authorized only to be used in a closed control cubicle! Dimension drawing, see page 308 298 Type Cat. No. 8426440000 8426460000 8426620000 8426630000 1526560000 1x 1x 1x 1x 2x CAP 3 W/20 °C - - 8428120000 2.2 W/40 °C - Housings Housings for pluggable printed circuit boards WAVEBOX 12.5 mm Housing version Polyamide PA 6.6 Flammability class U2 (UL 94) Colour WAVEBOX 17.5 mm grey Hinweise: BLZ may only be actuated with the supply disconnected. If small power ratings need to be switched for operating reasons, empirical values are available on request. Type Cat. No. Qty. Type Cat. No. Qty. WAVEBOX 12.5 mm 8426530000 12 WAVEBOX 17.5 mm 8426560000 8 WAVEBOX 12.5 mm 8426540000 8426550000 8427390000 8427400000 12 12 100 100 WAVEBOX 17.5 mm 8426570000 8426580000 8449220000 8449230000 8 8 100 100 1526460000 1526410000 100 100 1526560000 1526510000 100 1707470000 1707700000 100 100 orange orange - orange - black Other colours are available on request Connector socket 3-pole for BLZ 5.08/3 screw terminal - orange - black Other colours are available on request Connector socket 2-pole for BLZ 5.08/3 tension clamp terminal - orange - black Connector socket 3-pole for BLZ 5.08/3 tension clamp terminal - orange - black 1707460000 1707690000 beige beige 100 100 Accessories Cross-connection ZQV 2.5N/2 black Cross-connection ZQV 2.5N/2 red Cross-connection ZQV 2.5N/2 blue Cross-connection ZQV 2.5N/2 yellow Coding elements for BLZ BLZ KO black Coding elements for BLZ BLZ KO orange 1718080000 1717900000 1717990000 1693800000 1678530000 60 60 60 60 1 1718080000 1717900000 1717990000 1693800000 1678530000 60 60 60 60 1 1609890000 1635010000 1060860000 96 144 200 1609890000 - 96 - 8428130000 2 W/40 °C 100 8428120000 2 W/40 °C 100 WS connector marker WS15/5 Multicard* WS10/5 Multicard * WS10/5 Neutral* Screw cap Power loss, arranged side by side, type CAP 3 W/20 °C CAP 3 W/20 °C * Marker see page 317 + 318 Attention! These WAVEBOX-housings are authorized only to be used in a closed control cubicle! Dimension drawing, see page 308 299 Housings Description Housing base completely assembled with locking foot, not cross-connectable Housing base completely assembled with locking foot, crossconnectable Top part with transparent cover/top unit Pin header 5.08/2/3-pole; right Pin header 5.08/2/3-pole; left Connector socket 2-pole for BLZ 5.08/2 screw terminal Housings Housings Rated data Reference voltage acc. to VDE 0110 1/89 Pollution severity Overvoltage category Current Current-carrying capacity of bus contacts Volume resistance of bus contacts Printed circuit board dimensions Power loss (when mounted in row) Protection class Flammability acc. to UL level Upper temperature limit Connection data Screw connection solid Screw connection stranded Tightening torque range Torque phase with electric screwdriver DMS 2 Ordering data Housing frame SEG-U/LPU EG 6 50 V 2 III 1A 32 V nach VDE 0110/1.89 2 III 1 A/δU 50 0C 12 mΩ 100 x 120 x 1.8 mm 1.5 W IP 20 V -2 100 °C IP 00 V-2 100 °C 0.5...4 mm2 0.5...2.5 mm2 0.5 Nm 1 Type Housing SEG/U Cover plate Cat. No. 8007870000 8066100000 Qty. – – Type EG 6 (incl. front plate) End plate Combi foot, latchable Assembly plate Clamping yoke unit, right Clamping yoke unit, left Intermediate plate Connection spigot Connection tab 0.8 x 6.3 mm Connection tab 2 x 0.8 x 2.8 mm Tab / solder lug 0.8 x 2.8 mm Tab / solder lug 0.8 x 4.8 mm Printed circuit board, copper-coated Printed circuit board 2.54 pitch Dimensions See page 300 307 307 Cat. No. 8095840000 Housings Locking socket RSX SKH-RS Custom-circuit module Card-holder for rail-mounted profiles Housings Individual parts RS 70 Dimensions Fixing foot Spacer Printed circuit board Ordering data Screw connection version Tab connection version Card holder Strip profile Fixing foot right, with marking facility Fixing foot right, without marking facility Fixing foot left, without marking facility Fixing foot middle (intermediate foot) Fixing foot (RS 80/RS 100) for TS 32/TS 35 Spacer 5 mm Spacer 15 mm Spacer 25 mm Spacer 30 mm Spacer 45 mm End plate for mounting on rail without cover End plate for direct mounting without cover End plate for mounting on rail with low cover End plate for direct mounting with low cover End plate for mounting on rail with high cover End plate for direct mounting with high cover Cover profile, low Cover profile, high Screws Accessories Insert tag (unprinted) Protective strip, transparent For soldering 5 components Height of solder lugs: 6 mm Solder lug spacing: approx. 20 mm Max. voltage: 250 V~ Max. current: 5 A Type Cat. No. RSX 0329761001 RSX-F 0329860000 Total width: 77 mm Length: 25 mm Inside height: 66 mm Inside width: 55 mm Can be engaged together with RS 70 individual parts For vertical insertion of a printed circuit board Width: 60 mm Thickness: 1.8 (+0.15) mm (DIN 40802 T. 2) Type Cat. No. Qty. SKH-RS 4163020000 1 RFB RFO RF RFM 0119560000 0126260000 0119660000 0213760000 20 20 20 20 ZW ZW ZW ZW ZW 5 15 25 30 45 0119760000 0119860000 0126160000 0119960000 0120060000 20 20 20 20 20 ESO 7 SSt 7 0515200000 0515300000 – 20 301 Housings Locking socket RS 45 RS 70 Strip profile Locking socket Individual parts AP 45/RE AP 45/RE Di AP 45 / LI Di AP 45 / LI Dimensions) Fixing foot Spacer Printed circuit board Rated data Flammability acc. to UL level Upper temperature limit Ordering data String profile Fixing foot right, with marking facility Fixing foot right, without marking facility Fixing foot left, without marking facility Fixing foot middle (intermediate foot) Fixing foot (RS 80/RS 100) for TS 32/TS 35 Spacer 5 mm Spacer 15 mm Spacer 25 mm Spacer 30 mm Spacer 45 mm End plate for mounting on rail without cover End plate for direct mounting without cover End plate for mounting on rail with low cover End plate for direct mounting with low cover End plate for mounting on rail with high cover End plate for direct mounting with high cover Cover profile, low Cover profile, high Screws Accessories Insert tag (unprinted) Protective strip, transparent 302 Total width: 45 mm Length: 1000 mm/2000 mm For horizontal insertion of a printed circuit board Width: 42 (+0.5) mm Thickness: 1.8 (+0.15) mm (DIN 40802 T. 2) Length: optional/60…2000 mm Dim. of RS section: printed circuit board length – 4.5 mm Dim. of ADP section: printed circuit board length – 1 mm Example: circuit board length 160 mm, RS = 155.5 mm, ADP = 159 mm Width: 10 mm Maß RF Width: 5 mm/15 mm/25 mm/30 mm/45 mm Width: RS-Br.–2 mm (Ex.: RS=45 mm, LP=43 mm) Length: 67.8 (–0.2 ) mm Thickness: 1.6 (±0.2) mm (DIN 40802 Part 2) V-0 / V-2 strip profile / accessories 70 °C V-2 100 °C Type RS 45 (up to 2000 mm) RS 45 (up to 1000 mm) AP 45/LI AP 45/LI Di 30 x 14 AP 45/RE AP 45/RE Di Cat. No. 4027750000 8140880000 8143910000 8140870000 4011200000 Qty. 1 1 Type Cat. No. Dim. ZW Dim. A Dim. L Qty. RFB RFO RF RFM 0119560000 0126260000 0119660000 0213760000 20 20 20 ZW ZW ZW ZW ZW 5 15 25 30 45 0119760000 0119860000 0126160000 0119960000 0120060000 20 20 20 20 20 ESO 7 SSt 7 0515200000 0515300000 – 100 8143900000 20 8140860000 20 – Housings RS 80 RS 100 Strip profile Strip profile for Euro-cards AP 111 ADP 11 AP 110 AP 111 D AP 100 ADP 10 RF 180 AP 110 D RS 100 Screws AP 100 D AP 86 AP 85 ADP 5 RF 180 AP 86 D Housings ADP 6 AP 80 AP RF80 RE/LT AP 85 D Screws RS 80 AP 80 D Total width: Length: 84 mm 2000 mm Total width: Length: 104 mm 2000 mm/160 mm For horizontal insertion of a printed circuit board Width: 67.8 (+0.2) mm Thickness: 1.8 (+0.15) mm (DIN 40802 T. 2) Dim. RS section printed circuit board length –4.5 mm Dim. ADP section printed circuit board length –2 mm Example: circuit board length 160 mm, RS = 155.5 mm, ADP = 158 mm For horizontal insertion of a printed circuit board Width: 100 (+0.5) mm Thickness: 1.8 (+0.5) mm (DIN 40802 Part 2) Dim. RS section printed circuit board length –4.5 mm Dim. ADP section printed circuit board length –1 mm Example: circuit board length 160 mm, RS = 155.5 mm, ADP = 159 mm V-0 / V-2 strip profile / accessories 70 °C V-0 / V-2 strip profile / accessories 70 °C Type RS 80 (2000 mm) grey RS 80 (2000 mm) orange orange (RAL 2000) grey (RAL 7032) 4183130000 4157440000 RF 180 1324460000 1773400000 20 AP 80 AP 80 D AP RF 80 RE AP RF 80 LT AP 85 AP 85 D AP 86 AP 86 D ADP 5 (1000 mm) ADP 6 (1000 mm) 30 x 14 1324260000 1324360000 8320300000 20 20 20 20 20 20 – – – 8156200000 8156210000 1410860000 1411060000 1410960000 1411160000 4167150000 4167160000 4011200000 Qty. 1 1 Type RS 100 (2000 mm) grey RS 100 (2000 mm) orange RS 100 (155 mm) orange (RAL 2000) grey (RAL 7032) 4010870000 RF 180 1324460000 1773400000 20 AP 100 AP 100 D AP 110 AP 110 D AP 111 AP 111 D ADP 10 (2000 mm) ADP 11 (2000 mm) 40 x 14 1185060000 1185160000 1185260000 1185360000 1185460000 1185560000 4169320000 4169330000 4019420000 1773410000 20 20 20 20 20 20 (2 m) (2 m) – 4144870000 4148400000 Qty. 1 1 1 303 Housings Housings EG…/RST OST Dimensions Connection data Accessories EGR / EG 7 EGR / EGO RST / EG 7 EG 8 / EG 12 EG 8 Width (mm) Height (mm) with TS 35 x 7.5 with TS 35 x 15 with TS 32 304 EG 7/35 for TS 35 10 EG 7/combi foot 10 92 100 96 103 100 RST/OST EG 7 Width (mm) Height assembled (mm) 823472 for TS 32 with TS 35 x 7.5 with TS 35 x 15 819383 with combi foot with TS 35 x 7.5 with TS 35 x 15 with TS 32 10 91 99 93 101 97 EG 12 Dimensions EG 8 Width (mm) Height (mm) 104.9 EG 12 Width (mm) Height (mm) 104.9 12.5 18 Housings Housings DK 5 Dimensions Connection data Accessories DK 6 88,4 62 69 73 77 Dimensions Terminal width (+ fitting tolerance 0.2 mm) Insulating stripping length DK 5 6 mm 9 mm DK 6 8 mm 9 mm Connection data Screw connection, solid Screw connection, stranded Connection cross-section 0.5...4 mm 2 0.5...4 mm 2 AWG 20...12 0.5...4 mm 2 0.5...4 mm 2 AWG 20...12 End bracket Y W V for TS 32 for TS 35 End plate Marking material* Type TS 32 TS 35 x 7.5 TS 35 x 15 EWK 2 EW 35 AP dekafix 5 Cat. No. 0122800000 0383400000 0498000000 0199360000 0383560000 8268870000 Type TS 32 TS 35 x 7.5 TS 35 x 15 EWK 2 EW 35 AP dekafix 5 Cat. No. 0383400000 0498000000 0199360000 0383560000 8324560000 Housings Accessories Mounting rail (2 m lenghts) * For more inormation see sectional catalogue 5/installation products Housings miniconditioner MCZ transparent head-plate Dimensions Connection data Accessories cross-connection additional labelling 63.2 56 91 TS-Kontakt Dimensions Width (mm) + fitting tolerance 0.2 Insulating stripping length (mm) Connection data Z-spring connection, solid Z-spring connections, stranded Connection cross-section Accessories Mounting rail (2 m lenghts) W Mounting rail (2 m lenghts) U End plate End bracket for TS 35 Cross-connection (pluggable) 6 6 0.5…1.5 mm2 0.5…1.5 mm2 AWG 26…16 Type TS 35 x 7.5 TS 35 x 15 Cat. No. 0383400000 0498000000 APMCZ 1.5 EW 35 EW 35 ZQV 4 2-pole ZQV 4 3-pole ZQV 4 4-pole ZQV 4 5-pole ZQV 4 6-pole ZQV 4 7-pole ZQV 4 8-pole ZQV 4 9-pole ZQV 4 10-pole 8389030000 0383560000 0383560000 1608950000 1608960000 1608970000 1608980000 1608990000 1609000000 1609010000 1609020000 1609030000 305 Housings Housings EG…/EG-U/LPU EG 1 - Fig. I EG 2 - Fig. II Dimensions Terminal width (+fitting tolerance 0.2 mm) Insulating stripping length 18 mm 12 mm 20 mm 12 mm Connection data Screw connection, solid Screw connection, stranded Connection cross-section 0.5…6 mm2 0.5…4 mm2 AWG 20…12 0.5…6 mm2 0.5…4 mm2 AWG 20…12 Dimensions Connection data Accessories Accessories Mounting rail (2 m lenghts) End bracket Y W U for TS 32 for TS 35 Cross connection wire: 80 mm long, 50-pole/1 mm2 Marking material* Dimensions Terminal width (+fitting tolerance 0.2 mm) Insulating stripping length Connection data Screw connection, solid Screw connection, stranded Tab connection (DIN 46247) Connection cross-section Accessories Mounting rail (2 m lenghts) End bracket Cross connection wire: 80 mm long, 50-pole/1 mm2 Marking material* * see sectional catalogue 7 306 Y W U for TS 32 for TS 35 Type TS 32 TS 35 x 7.5 TS 35 x 15 EKW 2 EW 35 QD 50/grey dekafix 5 Cat. No. 0122800000 0383400000 0498000000 0199360000 0383560000 0238700000 Type TS 32 TS 35 x 7.5 TS 35 x 15 EKW 2 EW 35 QD 50/grey dekafix 5 EG 2 – Fig. III EG 2 – Fig. IV 18 mm 18 mm 2x 0.8 x 2.8 mm or 1x 0.8 x 6.3 mm 2x 0.8 x 2.8 mm Type TS 32 TS 35 x 7.5 TS 35 x 15 EKW 2 EW 35 QD 50/grey dekafix 5 Cat. No. 0122800000 0383400000 0498000000 0199360000 0383560000 0238700000 Type TS 32 TS 35 x 7.5 TS 35 x 15 EKW 2 EW 35 QD 50/grey dekafix 5 Cat. No. 0122800000 0383400000 0498000000 0199360000 0383560000 0238700000 Cat. No. 0122800000 0383400000 0498000000 0199360000 0383560000 0238700000 Housings EG 3 - Fig. V SEG-U/LPU with assembly plate MPL 22.5 mm 17 mm 20 mm 17 mm 0.5…4 mm2 0.5…2.5 mm2 0.5…4 mm2 0.5…2.5 mm2 AWG 26…14 Type TS 32 TS 35 x 7.5 TS 35 x 15 EKW 2 EW 35 QD 50/grey dekafix 6.5 Cat. No. 0122800000 0383400000 0498000000 0199360000 0383560000 0238700000 dekafix 6.5 Type TS 32 TS 35 x 7.5 TS 35 x 15 EKW 2 EW 35 QD 50/grey dekafix 5 EG 4 – Fig. VI EG 5 – Fig. VII EG 6 22.5 mm 17 mm 22.5 mm 17 mm 0.5…4 mm2 0.5…2.5 mm2 AWG 22…12 0.5…4 mm2 0.5…2.5 mm2 AWG 22…12 Cat. No. 0122800000 0383400000 0498000000 0199360000 0383560000 0238700000 Anreihmaß Type TS 32 TS 35 x 7.5 TS 35 x 15 EKW 2 EW 35 QD 50/grey dekafix 6.5 Cat. No. 0122800000 0383400000 0498000000 0199360000 0383560000 0238700000 Type TS 32 TS 35 x 7.5 TS 35 x 15 EKW 2 EW 35 QD 50/grey dekafix 6.5 Cat. No. 0122800000 0383400000 0498000000 0199360000 0383560000 0238700000 Type TS 35 x 7.5 TS 35 x 15 Cat. No. 0383400000 0498000000 EW 35 0383560000 dekafix 6.5 307 Housings with assembly plate MPL Housings WAVEBOX S 22.5 WAVEBOX L 22.5 Printed circuit board S 22.5 Printed circuit board L 22.5 WAVEBOX 12.5 WAVEBOX 17.5 308 Housings Socket blocks BLZ 5.08 / BLZF 5.08 BLZ 5.08/SL 5.08 PBT orange -20.. +100 °C UL 94 (VO) CuSn tin plated BLZF 5.08 PBT orange -20.. +100 °C UL 94 (VO) CuSn tin plated Characteristic system values Pitch Clearance Creepage distance Connection technology Length of soldering pin Mounting hole Insulating stripping length Terminal screw Isolations resistance Trough resistance 5.08 mm ≥ 2.5 mm ≥ 4.0 mm Screw/solder connection 3.2/4.5 mm ø 1.3 + 0.1 mm 7 mm M 2.5 ≥ 10 MΩ ≤ 5 mΩ 5.08 mm ≥ 3 mm ≥ 4.0 mm Tension clamp connection 0.08...2.5 mm2 0.5...2.5 mm2 0.5...2.5 mm2 1.5 mm2 0.13...1.5 mm2 0.13...2.5 mm2 0.5...2.5 mm2 0.05...2.5 mm2 0.5...1.5 mm2 28...14 A3 1.5 mm2 26...14 Rated data according to VDE Rated cross-section Rated current Current capacity Test voltage Nominal torque 2.5mm2 12A1) see derating curves2) 2.0 kV~ 0.5 Nm Rated data according to Rated cross-section Rated current (Tu=20°C) Rated voltage Rated impulse voltage Pollution severity Rated data according to UL AWG wire Rated current Rated voltage, industriell 7 mm Derating curve 26...14 10 A 300 V~ Housings Pin header with BLZ(F) / H05V-K0 75 / 3 POE VDE 0110 2.79 2.5mm2 12A1) see derating curves2) 2.0 kV~ VDE 0110 1.89 1.5mm2 12A3) 250 V 4 kV 3 Rated data according to UL 22...12 10 A 300 V~ Ambient temperature (°C) ≥ 105 MΩ ≤ 5 mΩ Load voltage (A)(A) Belastungsstrom Size Pin header with BLZ(F) / H07V-K1 5 / 3 POE Ambient temperature (°C) Derating curve Pin header with BLZ(F) / H07V-K1 5 / 3 POE Load voltage (A)(A) Belastungsstrom Connectable wires Terminal range “e” solid H05(07)V-U “f” flexible H05(07)V-K “f” with ferrules according to DIN 46228/1 with plastic collar according to DIN 46228/4 AWG wire Plug gauge acc. to EN 60947-1/10.91 Derating curve Load voltage (A) (A) Materials data Insulating material Colour Temperature range Flammability class Contact base material Contact surface Operation tool Screwdriver type SD/SDI 5 Ambient temperature (°C) Approvals List on request Applied for 1 ) Rated cross-section and max. number of poles established from derating curve at 20 °C ambient temperature ) Further derating curves on demand 2 309 Housings Locking socket profiles RS RS 80 RS 100 ADP 5 / ADP 6 ADP 10 / ADP 11 Rail mounting without cover Direct mounting without cover Rail mounting with low cover Direct mounting with low cover Rail mounting with high cover Direct mounting with high cover Fixing holes 310 Housings Semi-wire relay socket OS 2 and OS 2/5 Pluggable relay socket RSS 5MM Suitable for PCB mounting For miniature all-or-nothing relays type Tyco SNR, NAIS APE … Mechanical interlock with eject lever * * Soldering process ventilation not dimensioned in detail lock srew Ordering data Technical data Input voltage Output voltage Max. switching current Rated current Flammability class acc. to UL 94 Type RSS 5 MM Cat. No. 4056360000 250 V 250 V 6A 5A V-2 Ordering data Type OS2 OS2/5 Technical data Input voltage Output voltage Rated current 250 V 250 V 5A Flammability class acc. to UL 94 V-2 Cat. No. 94552100001) 94576400002) 4 kV (1.2/50 µs) 4 kV (1.2/50 µs) < 8 kV (1.2/50 µs) III 2 Insulation coordination acc. to EN 50178 Rated voltage Rated impulse voltage Input circuit Output circuit Input < output Overvoltage category Pollution severity Ambient conditions Ambient temperature Storage temperature - 25°C … + 50°C - 40°C … + 85°C Ambient temperature Storage temperature - 25°C … + 50°C - 40°C … + 85°C Dimensions Length / width / height Soldering pin 30.2 / 5 / 30 mm 3.5 mm Dimensions Length / width / height Soldering pin 49,78 / 12.5 /13.2 mm 3.2 mm Insulation coordination acc. to EN 50178 Rated voltage Rated impulse voltage Input circuit Output circuit Input < output Overvoltage category Pollution severity 250 V 250 V 4 kV (1.2/50 µs) 4 kV (1.2/50 µs) < 8 kV (1.2/50 µs) III 2 Ambient conditions 1) 2) equipped with with contact sockets B, C, F, H equipped with with contact sockets A, B, C, F, H 311 Housings Suitable for PCB mounting For solid state relais Type Opto 22, Crouzet … Secured in socket by fixing screws integrated in the module