Datasheet Wa v e S e r i e s M P I - O p t o High Speed Optocoupler The MPI-Opto offers isolation and signal level conversion for discrete signals at frequencies up to 50KHz. NEW It also provides 2 isolated outputs making it ideal for driving local displays and a PLC or DCS simultaneously. The input can be 5Vdc or 12-24Vdc while the outputs are rated 12-28Vdc @ 50mA. The input of the MPI-Opto can be provided by a proximity switch, photoelectric sensor or turbine flowmeter and can be either sinking or sourcing. Each output channel provides inverted and non-inverted signals. Applications include NPN-PNP conversion, signal inverter, level conversion, signal splitter and more. • • • • • Up to 50kHz switching frequency 1 input and 2 isolated outputs 5V and 12-28V inputs Can be used with sinking or sourcing sensors The innovative Wavebox housing is compact and uses plug-and-socket connections • CSA Class 1 Division 2 certified United States Canada Mexico Weidmuller Inc. Weidmuller Ltd. Weidmuller, S.A. de C.V. 821 Southlake Blvd. 10 Spy Court Ave Ingenieros Civiles #204 Richmond, Virginia 23236 Markham, Ontario L3R 5H6 Conjunto Industrial Chachapa Telephone: (800) 849-9343 Telephone: (800) 268-4080 72990 Puebla, Pue. Mexico Facsimile: (804) 379-2593 Facsimile: (905) 475-2798 Telephone: (222) 286 62 47 Email: [email protected] Email: [email protected] Facsimile: (222) 286 62 42 Website: www.weidmuller.com Website: www.weidmuller.ca MPI-Opto Solid State Relay Schematic diagram • dual input; 5V or 12-28V • 2 isolated outputs • sinking or sourcing outputs • up to 50 kHz switching frequency • inverting and non-inverting outputs • 3000Vac RMS isolation • compact; just 18mm wide • mounts on 35mm DIN rail • CSA approved, Class 1 Division 2 groups A, B, C, D; OUTPUTS: SINK OR SOURCE 50mA MAX. temperature code T4A • CE marked Rated data Input On-state voltage Off-state voltage Current Output Voltage Current Low-state voltage drop High state voltage supply Max. switching frequency General Isolation Temperature Wire size Dimensions in mm Ordering data WavePak MPI-Opto 2 TTL 12-24V TTL 12-24Vdc input input input input @5V @12Vdc @24Vdc 3.2-5Vdc 10-28Vdc 0-0.8Vdc 0-3Vdc 4mA on-state 4mA on-state 8mA on-state 12-28Vdc 50mA max. per output (sink or source) <1V Vs - 1V 50kHz input-output output channel-to-channel operating storage width length height on rail TS32 height on rail TS35 x 7.5 3000Vac RMS 3000Vac RMS 0°C to 55°C -20°C to + 70°C 22-12AWG 17.7 90.0 n/a 105.2 9916080000 Subject to technical changes · Printed in Canada · 99990224 · 07/2002