IRONWOOD CA-QFE44SE-M-Z-T-01

0.100 Typ.
2.000
2.500
Top View
3
1.011
0.393
1
0.238
2
Side View
1
2
3
Substrate: 0.0625"±0.007" FR4/G10 or equivalent
high temp material. 1/2 oz. Cu clad. SnPb plating
Pins: shell material- Brass Alloy 360 1/2 hard; finish10µ" Au over 50µ" Nil (min.). Contact materialBeCu; finish 10µ" Au over 100µ" Ni (min.)
Test points: material- Phosphor Bronze; platingSn over 50µ" Ni. Gold flash on contact end.
Description: Carrier Adaptor
44 position QFP Carrier Adaptor to mini grid. Package specs: 12mm tip to tip, 10mm body, 0.8mm pitch.
All tolerances: ±0.005" (unless stated otherwise). Materials and specifications are subject to change without notice.
CA-QFE44SE-M-Z-T-01 Drawing
© 1999 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: (651) 452-8100
www.ironwoodelectronics.com
Status: Released
Scale: 2:1
Rev: A
Drawing: W. Watson
Date: 11/24/99
File: CA-QFE44SE-M-Z-T-01 Dwg
Modified:

Open as PDF

Similar pages: IRONWOOD CA-PLCC28-Z-P-T-01; IRONWOOD CA-PLCC068-D-J-T-01; IRONWOOD CA-QFE52SA-L-Z-T-01; IRONWOOD CA-PLCC52-Z-M-T-01; IRONWOOD CA-PLCC84-Z-C-T-01; IRONWOOD CA-PLCC028-Z-J-T-01; IRONWOOD CA-QFE44SH-L-Z-T-01; IRONWOOD CA-QFE32SA-L-Z-T-02F; IRONWOOD CA-QFE32SA-L-Z-T-02; IRONWOOD CA-PLCC44-D-M-T-01; IRONWOOD CA-PLCC32-Z-M-T-01; IRONWOOD CA-QFE44SE-L-Z-T-01; IRONWOOD BP-1005; IRONWOOD CA-QFE44SB-L-Z-T-01; IRONWOOD CA-QFE52SF-M-Z-T-01; IRONWOOD CA-MLF32A-A-Z-T-01; IRONWOOD CA-PLCC20-Z-M-T-01; IRONWOOD CA-MLF48A-A-Z-T-01; IRONWOOD CA-QFE64SD-L-N-T-01; IRONWOOD CA-QFE52SA-M-Z-T-01; IRONWOOD CA-QFE52SF-L-Z-T-01; IRONWOOD CA-QFE32SA-M-Z-T-02F