MIL-C-5015 Connectors ITT Cannon is the foremost manufacturer of MS and MS type connectors with the widest range of connector styles, sizes and variations in the industry. These connectors utilize the finest materials, which, along with precision manufacturing and rigid quality control, assure ITT Cannon customers of the finest quality connectors. These circular connectors were originally designed for aircraft, but are now widely used in many other fields. They are particularly suitable for commercial applications requiring low cost and high reliability. MS-E/F/R/ER ENVIRONMENTAL RESISTANT MS-E, MS-F, MS-R AND F80 (Solder/Crimp Termination) MS-E, MS-F and MS-R are similar to MS-A and MS-B connectors but have resilient insulators and wire sealing grommets for extreme environmental conditions and high altitude sealing. MS-E's and MS-F's have a mechanical cable clamp; the MS-R has a shorter, lighter weight endbell without the cable clamp. Both the MS-F and MS-R have 0 rings to supplement the interfacial seal. Shells are aluminum alloy. Contacts are siliver plated copper alloy. The F80 modification (crimp contact termination) is available in E, R, F and BFR styles with resilient insulators. POTTING ER CONNECTORS (Solder Contact Termination) These lightweight potting connectors provide resistance to salt water, fuels, etc., and will withstand the effects of high vibration. 3100 and 3106 connectors with plastic potting cups and resilient inserts meet the requirements of MS3103 and MS25183. Contacts are silver plated copper or brass. ER insulators are resilient; shells are aluminum alloy. A 90˚ plug (3108ER) is also available. ACCESSORIES Accessories to fit MS connectors include junction shells, protective caps, dummy or stowage receptacles, cable clamps, telescoping bushings. How to Order In the latest revision of MIL-C-5015, a new class of environment-resistant connectors was added. This new class F connector supersedes the previous class E connector. The MS3106F is identical to the MS3106E except that the MS3106F has an "0" ring under the coupling nut. The class E will still be available upon request for exitsting programs, and upon ordering will also bear the E nomenclature on the shell. MS-F and MS-R connectors are designed to operate in the extreme environmental conditions of high altitude filight and must be completely sealed to withstand moisture, condensation, vibration, corona and flashover caused by high altitude environments. They have resilient grommet with internal restrictions in the wire cavities which act as 0 rings around the wires. This allows the wires to slide thru the grommet with a minimum of friction, yet when the ferrule is seated and the endbell tightened it provides a perfect wire seal thru a wide variety of wire diameters. This seal at the rear, plus the interfacial seal at the front, effects a completely environment-resistant asssembly when the plug is mated to and F or R receptacle. Sockets are of the closed-entry type. The temperature range for this connector is -55˚C (-67˚F) to +125˚C (+257˚F) and meets the requirements of MIL-C-5015. The F80 modification (crimp contact termination) is avialable in resilient insulators in the E, R, F, and BFR styles, creating a large selection of insert assemblies and hardware. Components are identical to the MS-5015 except that the contacts are modified for crimp termination providing and inexpensive crimp contact connector with the proven reliability of and complete intermateability with the MS-5015 series. See page 187 for assembly instructions. Cable clamps have been integrally designed with the endbell on MS-E and MS-F connectors. Class R is without the cable clamp. CA MS 3106 3106 R 20 - 27 P W R 20 - 27 P W * - PREFIX SHELL STYLE CLASS SHELL SIZE CONTACT ARRANGEMENT CONTACT TYPE ALTERNATE INSERT POSITION MODIFICATION CODE PREFIX MS - Conforms to latest MIL-C-5015 revision CA - Cannon designation (for any modification) SHELL STYLE 3100 - Wall mounting receptacle 3101 - Cable connecting plug 3102 - Box mounting receptacle * 3106 - Straight plug 3108 - 90˚ angle plug CLASS E/F - Environmental with resilient insulators and integral cable clamp. R - Environmental with resilient insualtors and shortened light weight endbell; also additional sealing with 0 ring seal under coupling nut in styles 3106 and 3108 SHELL SIZE Coupling thread diameter in sixteenths of an inch CONTACT ARRANGEMENTs See pages 171-174 CONTACT TYPE P for Pin; S for Socket ALTERNATE INSERT POSITION W, X, Y and Z (omit for "Normal") MODIFICATION CODE (applies to CA numbers only, not MS) F80 - Crimp type contacts. See page 187 for assembly instructions. * When ordering MS3106F to the Cannon part number, designate CA06R. See pages 177 and 181. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 167 MIL-C-5015 Connectors MS-E/F/R/ER Performance and Material Specifications MATERIALS AND FINISHES Shell Material Aluminum alloy O.D. Chromate coating Finish over cadmium plating Insulator Material Polychloroprene (resilient) Contacts Material Brass or copper alloy Finish Silver plate Termination Tinned solder pot WIRING For class E, R and F connectors, satisfactory moisture sealing will be obtained if AWG and MS wire sizes and insulation outside diameters are governed by this table. Contact Wire Size Size (MIL-W-5086) 16 16 thru 20 Insulation OD Limit (inches) CONTACTS Pin and socket contacts are designed to resist severe vibration and repeated connection and disconnection. The average force to either engage or separate pin and socket contacts will not exceed the average values given in the latest revision of MIL-C-5015. FORCE In lbs. 16 12 Contact Sizes 8 4 0 Maximum 3.00 5.00 10.00 15.00 20.00 Average 2.10 3.50 7.00 10.50 14.00 Minimum .25 .50 .75 1.00 2.00 THERMOCOUPLE CONTACTS Sizes 12 and 16 contacts, machined from matching thermocouple lead wire alloys, can be supplied in ITT Cannon connectors. These thermocouple contacs maintain continuity from thermal-sensor leads thru a bulkhead of other closures in temperature measuring applications. These contacts for matching lead wires are detailed by the standards of the Instrument Society of America (I.S.A); I.S.A Standards .064 (1.63) min. to .130 (3.30) max. 12 12 thru 14 .114 (2.90) min. to .170 (4.32) max. 8 8 thru 10 .164 (4.17) min. to .255 (6.48) max. 4 4 thru 6 .275 (6.98) min. to .370 (9.40) max. 0 0 thru 2 .415 (10.54) min. to .550 (13.97) max. ELECTRICAL SERVICE DATA Test current ratings of contacts and allowable voltage drop under test conditions when assembled as in service are shown below. Maximum total current to be carried per connector is the same as the allowable in wire bundles as specified in MILW-5088. Material J and Y Iron and constantan K Chromel and alumel T Copper and constantan Since the thermocouple connector applications determines the soldering methods and materials to be used, thermocouple contacts, identified by permanent markings, are normally supplied with untinned solder pots. Thermocouple contacts are supplied only in connectors having resilient insulators. HIGH POTENTIAL TEST VOLTAGE MS connectors show no evidence of breakdown when the test voltage given below is applied between the two closest contacts and between the shell and the contacts closest to the shell for a period of one minute. MS Service Rating Test Voltage (RMS] 60 cps Air Spacing Nom. (inches) Suggested * Operating Voltages DC AC (rms) Creepage Distance Nom. (inches) Contact Size Test Current (amps) Potential Drop (millivolts) Inst. 1000 250 200 16 13 49 A 2000 700 500 1/16 1/8 12 23 42 D 2800 1250 900 1/8 3/16 8 46 26 E 3500 1750 1250 3/16 1/4 4 80 23 B 4500 2450 1750 1/4 5/16 0 150 21 C 7000 4200 3000 5/16 1 1/16 * As indicated in previous MS Specification and to be used by designer only as a guide. High Voltage Cartridges for MS-E and MS-R (HV310*E/R Series) High voltage conductors as well as power and/or control signal conductors can now be connected simultaneously in standard MS connectors. Previously, MS connectors involved in high voltage circuitry required individual design considerations and could only be ordered as a "special." The new high voltage cartridge allows conversion of a standard connectors to one capable of handling up to 15,000 volts DC (Test Voltage - mated), operating voltage - See level 5,000 VDC or 3,500 VAC. These cartridges are molded of nylon and provide as high degree of arc-over protection between adjacent contacts or between a contact and the connector shell. Unmated, each cartridge provides a nylon isolating barrier capable of withstanding up to 10,000 volts DC (or peak). • • • The contact within the cartridge is a 7.5 amp. size 20, crimp snap-in type with dielectric rear release clip retention. This contact is removable with the plastic CIET20 insertion/extraction tool provided the insulation is .084 (22.45) or less. The contact may be crimped with the standard MS-3191 tool and MS-3191-20A locator and hand inserted into the nylon cartridge. The cartridge body is installed in the connector at the factory. High voltage cartridges now available fit the space normally occupied by a #4 o #8 size contact in an MS-E, MS-R or MS-F type connector. Over forty-nine contact arrangements are currently available in which these high voltage cartridges may be used. Contsult factory for ordering information. Standard contact arrangements are adaptable to high voltage applications. Eliminates need for a separate high voltage connector. Assembly time is reduced. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 168 MIL-C-5015 Connectors MS-E/F/R/ER MS Alternate Insert Positions A B All views are looking into front of pin insert of rear of socket insert. Wire Size Contact Alternate Positions-Degrees Shell ArrangeSize ment Service Rating W X Y Z 8S 8S-1 1 #16 A - - - - 10S 10S-2 10SL-4 10SL-3 1 #16 2 #16 3 #16 A A A - - - - 1 #12 D - - - - 1 #16 2 #16 D A 70 12 12-5 12S 12S-4 12S-3 145 215 20 20-22 20-23 20-24 20-27 20-29 20-33 290 22-2 * 22-4 35 35 110 110 250 250 325 325 A A A 35 80 - 110 - 250 - 325 280 - D A 70 35 145 110 215 250 290 325 D 35 110 250 325 D 80 110 250 280 E E E B D 70 35 35 80 145 110 110 110 215 250 250 250 290 325 325 280 A(A-D) D(E) A A(A-C,E,F) E(D) D(A) A(all others) A(C-E) D(all others) A A A D(H) A(all others) D(J) A(all others) A 35 110 250 325 80 80 110 250 280 280 80 110 250 280 D A D(A,G,H) A(all others) A 80 110 250 280 A A A 35 80 35 110 110 250 250 325 280 325 A 80 110 250 280 D 80 110 250 280 D E Inst. 45 80 80 110 110 250 250 40 280 280 D)A,E,J) A(all others) D 80 110 250 280 35 110 250 325 D 35 80 110 110 250 250 325 280 120 240 110 180 270 145 215 290 16 A 35 110 250 325 16-10 16-12 16-11 16-13 2 #16 2 #12 3 #12 1 #4 2 #12 2 #12 A A A A 90 35 35 180 110 110 270 250 250 325 325 16S 16S-1 * 16S-4 16S-5 16S-6 16S-8 7 #16 2 #16 3 #16 3 #16 5 #16 A D A A A 80 35 70 90 - 110 145 180 170 250 215 270 265 280 325 290 - 22-14 * 22-15 18-1 10 #16 70 145 215 290 22-18 18-3 18-4 18-5 2 #12 4 #16 1 #16 2 #12 1 #8 7 #16 1 #12 5 #16 2 #12 4 #12 5 #12 6 #16 3 #12 1 #8 4 #12 10 #16 3 #16 1 #0 3 #12 4 #12 8 #16 A(B,C,F,G) Inst.(all others) D D D 3 #8 2 #12 2 #8 4 #16 2 #12 1 #16 2 #8 1 #0 3 #12 4 #16 2 #16 3 #16 2 #8 1 #16 4 #12 19 #16 1 #16 5 #12 8 #16 1 #12 8 #16 35 35 80 110 110 110 250 325 250 325 250 280 22-19 22-20 22-22 22-23 14 #16 9 #16 4 #8 8 #12 B A 70 - Inst. 80 110 18 16-9 18-7 18-8 18-9 18-10 18-11 18-12 * 18-13 * 18-15 18-19 * 18-22 20 20-2 20-3 20-4 20-7 20-8 20-14 20-15 20-16 20-17 20-18 20-19 4 #16 2 #8 3 #12 2 #8 7 #12 7 #16 2 #12 1 #16 5 #12 6 #16 3 #12 3 #8 - 22-7 22-9 22-10 22-11 22-12 22-13 22-17 290 * 22-27 22-28 250 280 A A A A 80 80 120 170 110 240 265 280 250 280 A A D 70 120 120 145 240 240 215 290 D D D A(C-F) D(A,B,G,H) Inst. 70 45 80 145 215 110 250 110 250 290 280 80 110 250 280 A 80 110 250 280 A A 80 80 110 250 280 280 A 90 180 270 A 35 110 A 90 180 270 250 325 24 24-2 * 24-5 * 24-6 24-7 * 24-9 24-10 * 24-11 24-12 24-20 24-22 24-27 24-28 28 28-1 * 28-2 28-7 28-9 Z A A 90 70 * 22-6 Y 280 - 22-5 X 250 A Inst. Inst. Inst. A A - W 110 A - Alternate Positions-Degrees Service Rating 8 #16 1 #8 7 #12 7 #12 16 #16 8 #12 14 #16 2 #12 2 #4 7 #8 6 #12 3 #8 3 #12 2 #4 9 #16 2 #12 4 #8 7 #16 24 #16 6 #12 3 #8 12 #16 2 #12 2 #4 6 #16 6 #12 Position Y Contact Shell ArrangeSize ment 80 3 #16 4 #16 5 #16 6 #16 3 #16 2 #16 - Position X A 1 #8 14-3 Position W 3 #16 3 #8 2 #8 2 #16 2 #8 14 #16 17 #16 11 #16 14S 14S-1 14S-2 14S-5 14S-6 14S-7 14S-9 14 22 Wire Size A B Normal Position Contact Shell ArrangeSize ment A B B B A A 28 28-10 28-11 28-12 28-15 28-16 * 28-17 * 28-19 28-20 28-21 * 28-22 32 * 32-1 * 32-6 32-7 32-8 * 32-9 80 110 250 280 80 35 35 110 110 110 - 250 250 250 250 280 325 - 80 - 250 280 80 - - 280 80 80 80 110 110 250 250 280 280 280 32-15 32-17 36 * 36-4 36-5 36-6 36-7 36-8 36-9 36-10 36-14 * 36-15 40-10 * 40-56 Wire Size Position Z Alternate Positions-Degrees Service Rating W D(G) A(all others) 80 110 250 280 A 80 110 250 280 A A A A(A-L),B(R) D(M-P) A(C,E,G,J,K,L) B(H,M), D(A,B) A 90 80 80 80 180 110 110 110 270 250 250 250 280 280 280 80 110 250 280 80 110 250 280 A D 80 70 110 250 145 215 280 290 E(A) D(all others) A 80 110 250 280 80 110 250 280 Inst. (A,B,h,j) A(all others) A 80 125 235 280 80 125 235 280 D 80 110 250 280 D 35 110 250 280 D 45 110 250 - A(B,C) D(A) A A 70 145 215 290 35 120 240 110 250 325 A 80 110 250 280 A 80 110 250 280 A 80 125 235 280 A D 80 90 125 235 180 270 280 - D (m) A(all others) 60 125 245 305 16 #16 9 #8 4 #4 85 #16 A 65 125 225 310 3 #12 2 #8 2 #4 18 #16 4 #12 26 #16 35 #16 20 #16 15 #16 6 #16 4 #12 4 #16 10 #16 37 #16 3 #16 3 #4 3 #12 2 #0 16 #16 2 #12 3 #8 2 #4 28 #16 7 #12 24 #16 6 #12 12 #16 2 #4 2 #0 6 #12 4 #4 3 #0 4 #0 4 #4 2 #0 40 #16 7 #12 46 #16 1 #12 14 #16 14 #12 2 #8 1 #4 48 #16 6 #16 5 #12 5 #8 35 #16 X Y Z A 72 144 216 288 44 44-1 36 #16 6 #12 D 65 125 225 310 48 48-5 90 #16 1 #8 9 #12 A 65 125 225 310 D - * Not MSA/B insert arrangements and polarization. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 169 MIL-C-5015 Connectors MS-E/F/R/ER ITT Cannon Designated Alternate Insert Positions Not MS approved 2 20 17 12 4 9 8,13 11 6 22 19 5,3 15 21 18 16 14 NOTE: Front view of pin insulator rotates as shown. Shell Size Contact Arrangement Wire Size Service Rating Available Position 10SL 10SLA4 5 #20 A 2 3 5 8 12S 12SA10 4 #16 Inst. 3 5 8 13 20 20A37 4 #8 D 24 24A24 12 #12 A 2 4 9 12 28 28A16 A 2 3 5 32 32A10 32A47 5 #16 4 #4 43 #16 54 #16 A A A 3 2 2 4 3 3 A A A A 2 2 2 2 A A 4 2 28A51 36 36A16 36A34 36A46 36A66 40 40A27 40A33 47 #16 18 #12 52 #16 27 #12 52 #16 4 #12 60 #16 7 #8 6 #4 12 13 8 9 13 5 4 4 8 5 5 9 8 8 12 9 9 13 12 12 13 13 3 3 3 3 4 4 4 5 5 5 5 8 8 8 8 9 9 9 9 13 12 12 12 17 13 13 13 18 14 3 17 5 20 8 22 13 15 20 Note: For ITT Cannon contact arrangements not listed, consult factory. Position Normal Angle (degrees) 0 2 260 3 110 4 80 5 use pos. 3 6 85 8 250 9 280 11 105 12 100 13 use pos. 8 14 30 15 45 16 120 17 130 18 150 19 195 20 220 21 255 22 290 23 165 24 330 25 235 26 125 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 170 MIL-C-5015 Connectors MS-E/F/R/ER Contact Arrangements (Face View Pin Insert) LEGEND Resilient only Resilient & Plastic ¢ High Volume Layouts - readily available from Cannon Distributors ¢ ¢ ¢ ¢ B A A B D C B Shell Size No. of Contacts Service Rating 8S-1 1 #16 A 10S-2 1 #16 A 10SL-4 2 #16 A ¢ B 10SL-3 3 #16 A A C C B A B A E 10SLA4 5 #20 A ¢ D A ¢ 12S-4 1 #16 D 12-5 1 #12 D 12S-3 2 #16 A 12SA10 4 #16 Inst. 14-3 1 #8 A 14S-9 2 #16 A ¢ A C A C A D A C B F E B A C A D 14S-1 3 #16 14S-7 3 #16 14S-2 4 #16 14S-5 5 #16 14S-6 6 #16 16-12 1 #4 16-11 2 #12 16S-4 2 #16 Service Rating A A Inst. Inst. Inst. A A D ¢ ¢ A A C C A B B Shell Size No. of Contacts 16S-5 3 #16 16S-6 3 #16 16-10 3 #12 Service Rating A A A E D B C 16-9 2 #16 (B,D) 2 #12 (A,C) A F A B A D B C 16-13 2 #12 (A-Iron B-Constantan) A ¢ E A D B A C Shell Size No. of Contacts C B B E D B B B A B G A B C 16S-8 5 #16 16S-1 7 #16 18-7 1 #8 18-3 2 #12 A A B D ¢ A C A D A C B C B D B A A D C A E A D B C B F E A C B C D D B B C Shell Size No. of Contacts 18-5 1 #16(A) 2 #12(B,C) 18-22 3 #16 18-4 4 #16 18-10 4 #12 18-13 3 #12 (B,C,C) 1 #8(A) Service Rating D D D A A ¢ ¢ 18-15 4 #12 (A, C-Iron; B, D-Constantan) A A C D F G H D A A F B J C C E F E C G C B B B H C A A A B I D B E A A H A F B G 18-12 6 #16 ¢ G E 18-11 5 #12 J D K Shell Size No. of Contacts Service Rating 18-9 5 #16(B,C,E-G) 2 #12(A,D) Inst. 18-8 7 #16(A-G) 1 #12(H) A A A D 18-1 10 #16 18-19 10 #16 20-2 1 #0 20-23 2 #8 20-3 3 #12 20-19 3 #8 A(B,C,F,G) Inst. (all others) A D A D A D C A E A C B 20-4 4 #12 Service Rating D 20-24 2 #16 (A,C) 2 #8 (B,D) A 20A37 ITT Cannon pos. #8 of 20-4 D A E A D E B 20-14 3 #12(C,D,E) 2 #8(A,B) A G B A C C C Shell Size No. of Contacts D A F B F D C B F E E F B D 20-8 4 #16(B,C,E,F) 2 #8(A,D) Inst. B 20-17 1 #16(F) 5 #12(A-E) A D C B C D 20-22 3 #16(B,D,F) 3 #8(A,C,E) A 20-15 7 #12 A Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 171 MIL-C-5015 Connectors MS-E/F/R/ER Contact Arrangements (Continued) LEGEND Resilient only Resilient & Plastic ¢ High Volume Layouts - readily available from Cannon Distributors ¢ F A G J D C E G E B H F Shell Size No. of Contacts 20-7 8 #16 Service Rating A(C-F) D(A,B,G,H) H E B J J B 20-16 7 #16(A-G) 2 #12(H,I) A A Shell Size No. of Contacts 22-11 2 #16 22-2 3 #8 Service Rating B D F C Shell Size No. of Contacts Service Rating P C H B F A C D A C B D 22-4 2 #12(A,C) 2 #8(B,D) A B E B C D 22-10 4 #16 22-22 4 #8 E A G A G A A A B A A H C 22-12 3 #16(A,C,D) 2 #8(B,E) D B G H A F J B E D C F F B G B H B H G C E C D C D F 22-28 7 #12 22-18 8 #16 22-23 8 #12 A A(C-E) D(all others) D(H) A(all others) C J E D E 22-17 8 #16(A-D,F-J) 1 #12(E) D(A), A(all others) A D E T J H V 22-20 9 #16 A F C A D B F N A J C E B C D Shell Size No. of Contacts 24-27 7 #16 24-6 8 #12 Service Rating E D(A,G,H) A(all others) G H C G E D C D K J E 24-20 9 #16(A-D,G-L) 2 #12(E,F) D B B C K D J 24-2 7 #12 24-10 7 #8 D A E G F J H J K L M H K M L K E G F F 24-19 12 #16 6 #12(B-G) A D E P N R S 24A24 12 #12 24-5 16 #16 A A A L B A C D C C H 24-11 6 #12(A-C,G-I) 3 #8(D-F) A A B L L D F 24-12 3 #12(B,D,E) 2 #4(A,C,) A A M C H G E B E A A G D B C D A D E B 24-22 4 #8 B A E 24-9 2 #4 A F A F A A B P R S G D B N U 22-14 19 #16 H G D E 22-19 14 #16 G A E A L MA K C M F 22-27 8 #16(A-H) 1 #8(J) D(J), A (all others) F A F 22-15 1 #16(D) 5 #12(A-C,E,F) A(A-C,E,F),E(D) B N G D E Service Rating Inst. ¢ A L J J F Shell Size No. of Contacts A D ¢ K B G 22-7 1 #0 B E D 22-5 4 #16(A,C,D,F) 2 #12(B,E) D A H 20-29 17 #16 E C C D G F H E C E 20-27 14 #16 22-9 3 #12 B J B P R S 20-11 13 #16 D A E K D M A N T C L G J L B K N H K C F B D 22-13 1 #16(E) 4 #12(A-D) A(A-D), D(E) J F M 20-33 11 #16 C 22-6 1 #16(B) 2 #8(A,C) D A E B H F A B C A C E A D B E G N D F 20-18 6 #16(A,C-E,G,H) 3 #12(B,F,I) A A C D M C L ¢ A J L E A B B B M H C D ¢ A K A H F A C D G J B C M P N D O I H G E F 24-7 14 #16(A-M,O) 2 #12(P,N) A Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 172 MIL-C-5015 Connectors MS-E/F/R/ER Contact Arrangements (Continued) LEGEND Resilient only Resilient & Plastic ¢ High Volume Layouts - readily available from Cannon Distributors F F A A H A E K B F C G L S T W J N X G Q Y E D D B A A B C J G V B B E A B P U A C H M R D H J C C G F Z E C M F D B L K E J G H D E Shell Size No. of Contacts 24-28 24 #16 28-7 2 #4 28-22 3 #16(D-F) 3 #4(A-C) Service Rating Inst. D D 28-10 3 #12(A,F,G) 2 #8(B,E) 2 #4(C,D) D(G), A(all others) 28-1 6 #12(A,B,D-F,H) 3 #8(C,J,G) 28A16 5 #16(A,D-F,J) 4 #4(B,C,G,H) 28-19 6 #16(A-C,H,L,M) 4 #12(E,G,J,K) D(A,E,J) A(all others) A A(C,E,G,J,K,L) B(H,M),D(A,B) ¢ J H J K G M C G J H R P X Z E N V U g j K S T W b a f c T L B N S V U M C V N U P H M R N 28-20 4 #16(K-N) 10 #12(A-J,P) A G Q P D J E S A F L H 28-17 15 #16 28-16 20 #16 A(A-L), B(R) D(M-P) A I M D V E W X J 28-11 18 #16(A-I, N-X) 4 #12(J-M) A U d K C T b Y L D T E a Z M C X B S N B G A R P F K R W D E J F R P E A E K L C L F F G H 28-12 26 #16 A n d c j h r p W Y V f e k D A B C D E G H J K L M N P R S T U A A B F Z W X V U g A A A B C D F G H J L M N P R b a h k l G 28-2 12 #16(A,L,N) 2 #12(M,P) D G M L T S J H A K ¢ K e B B K P C D F B F E Y d N D ¢ A D C M M 28-9 6 #16(A,H-M) 6 #12(B-G) D Service Rating N D C G P H F Shell Size No. of Contacts H B L A B L E J A K A d m e s t m Z n u h p v b a g f m l w D E C c j r C k B G F s D y H D H 28-15 35 #16 28-21 37 #16 28A51 43 #16 32-17 4 #4 C Service Rating A For MIL equip design, use 28-21 A A D 32-1 3 #12(A,C,D) 2 #0(B,E) E(A),D(all others) 32-15 2 #0(A,G) 6 #12(B,C,D,E,F,H) D E G F K J l L Shell Size No. of Contacts B C B E M N 32-9 12 #16(C-N) 2 #4(A,B) D A A E B C G H L Y F c J I K N M R P O V U X N U d V b W X Shell Size No. of Contacts Service Rating 32-6 16 #16(A-O,S) 2 #12(U,V) 3 #8(P,R,T) 2 #4(W,X) A A E B F K R G e j L P R S Y Z k C W X d h J S c D I P a e H O Z S T W M T D T f a g U b V C E K L B A J H F A G B H C M N D I O O P W X e K n s b j p t V v C B d c k q u x U T h N M a Z g G F L S R Y f m E D J l r w y 32-8 24 #16(A-L,T-Z,a-e) 6 #12(M-S) 2 #8(O,R) 32-7 28 #16(A-N,W-Z,a-k) 7 #12(O-V) 32A47 47 #16 32A10 54 #16 36-4 3 #0 A For new MIL equip. design, use 32-7 Inst. (A,B,h,j) A(all others) A A A(B,C),C(A) *NOTE: Additional layouts are the same as shown but in unique alternate positioins. Please consult the factory. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 173 MIL-C-5015 Connectors MS-E/F/R/ER Contact Arrangements (Continued) LEGEND Resilient only Resilient & Plastic ¢ High Volume Layouts - readily available from Cannon Distributors † Grommet not available. Consult factory for ordering connectors with this arrangment. A A A J B F D K P B E C F Q N H C L N M X P S R K R 36-6 4 #4(B,C,E,F) 2 #0(A,D) 36-14 6 #16(K-N,P,Q) 5 #12(B,D,F,H,J) 5 #8(A,C,E,G,I) Service Rating A A D 36A16 18 #12 (B,C,V,J,K,M,N, R, T-Iron; A,D-F,H,L P,S,U-Constantan) A R B T Q 36A46 27 #12 36-9 14 #16(A-G,Z-f) 14 #12(H-N,S-Y) 2 #8(O,R) 1 #4(P) A A k c P Z L K Y G Service Rating D(m), A (all others) S m T Y n v x H C k u z O R E D K J P Q Z W V Z Y X e h j e d r t w y m 36-8 46 #16(A-X,Z-z 1 #12(Y) A P k x g v AB V j g h s z t t r s AA AG y A A d T b c AF m n x AJ l v w k u AC AB AE AD AK 36A34 52 #16 K U V e p z AA AF AG 36-10 48 #16 L W f D M X Y E F N j r AC AD AE Z A G P R a b i y x S a q p w z U h H J M Z Y n L T S f m u E D K R d c s J X c k r w v u b i h q p n t g f a C B H N U T S F N M W a y 36-7 40 #16(A-Z,a-s) 7 #12(t-z) A A G F L R B C B V U p H L P d c g f s t z M X m v s x 36-15 35 #16 W K J O b k w r H Shell Size No. of Contacts c X p u J N g j i T C F E I b f n F X W e h N S R a Z d g h a M Y E W V A D G J M L P B G I K U f b O D V m j N e E F H † A D C C U d G N ¢ B A L c c T 36-5 4 #0 A C F E Shell Size No. of Contacts S B K X d H W b Y Z e A P Y D F E J T U a D I O V d f U T U a L V b D M F M W C G N R M A G H e L K S J H I J E G S C Z D C D E B A B I AM 36A66 52 #16(A-c,h-AK) 4 #12(d,e,f,g) A † 1 24 B A G M F 21 42 H 20 C 51 18 58 36 47 14 AC AD 8 31 u 98 AZ 10 11 40A33 7 #8(G-N) 6 #4(A-F) Service Rating A 40-10 16 #16(A,B,E-H,M,N,P Q,V-Y,b,c) 9 #8(C,D,I,L,O,R,U,Z,a) 4 #4(K,J,S,T) A m AJ W f g q p y AE AF AG M V d n x r AA z BD BE BF BM BN BP BS BT s AB AK AL AM AN AU AV AW AX AT BA BB BC BJ BK BL 12 L U c b w AP AR AS 32 13 Shell Size No. of Contacts k D K T a Z v J S R j i t 30 33 34 15 h 7 48 49 35 16 6 29 57 50 37 17 D 45 Y C B H F P X 28 46 59 38 K E 56 60 N 5 44 52 19 J 4 27 55 53 39 E 3 26 43 54 40 N L 41 A 2 25 23 22 AY BG BR BU BV 40A27 60 #16 40-56 85 #16 A A A B A C B H E D J S G F L M I H P O N J K S R AA T U W V X a c b e d f AX j h o p m k r s n AN AD AZ BJ BS BA BK D AR BB b AG AH p n m x AS AT y z AJ AK BC AU BD AV AL BE AW BF BG BM BM BU BV BP BQ BW BR BX CA BZ CD CC Service Rating AF a k w R Q Z j v BL BY 44-1 36 #16(A-S,Z-t 6 #12(T-Y) AE G P Y h u AQ BT t Shell Size No. of Contacts F N X g t AP AY BH g f s AC E M W Y AM Z V e r AB L U d q D K T c C CB CE 48-5 90 #16(A-BL,BN-BT,BW,BX) 1 #8(CD) 9 #12(BM,BU,BV,BY-CC,CE) A Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 174 MIL-C-5015 Connectors MS-E/F/R/ER Cable Connecting Plug (Receptacle with no mounting flange) MS3101E/MS3101F Integral Cable Clamp CA3101E/CA3101E MS3101E cable connecting plugs are used for cable extension requirements, where mounting provisions are unnecessary. L MS3101E plugs mate with 3106, 3107 and 3108 plugs. Note: the D revision of MIL-C-5015 has changed the nomenclature of the 3101 from receptacle to plug. MS3101R Shell Size CA3101R B Min. E Max. E Min. G Max. K V G E A Thd. S1 B P MS3101R cable connecting plug is identical in purpose to the MS3101E. The MS3101R features a shorter lightweight endbell and mates with 3106, 3107 and 3108 plugs. Note: The D revision of the MIL-C-5015 specification has changed the nomenclature of the 3101 from receptacle to plug. K Max. M W L1 S1 M K P G A Thd. B L Max. L1 Max. M +.031(0.79) -.000(0.00) P Max. S1 Max. V Max. W Max. 8S .375 (9.53) .235 (5.97) .102 (2.59) .844 (21.44) .125 (3.18) 2.250 (57.15) 1.838 (46.69) .562 (14.27) .890 (22.61) .515 (13.08) .840 (21.34) 1.046 (26.57) 10S .375 (9.53) .235 (5.97) .102 (2.59) .969 (24.61) .125 (3.18) 2.250 (57.15) 1.838 (46.69) .562 (14.27) .890 (22.61) .640 (16.26) .840 (21.34) 1.046 (26.57) 10SL .375 (9.53) .297 (7.54) .140 (3.56) 1.062 (26.97) .125 (3.18) 2.250 (57.15) 1.838 (46.69) .562 (14.27) .970 (24.64) .640 (16.26) .900 (22.86) 1.125 (28.58) 12S .375 (9.53) .297 (7.54) .140 (3.56) 1.062 (26.97) .140 (3.56) 2.250 (57.15) 1.838 (46.69) .562 (14.27) .970 (24.64) .765 (19.43) .900 (22.86) 1.125 (28.58) 14S .375 (9.53) .422 (10.72) .195 (4.95) 1.156 (29.36) .140 (3.56) 2.250 (57.15) 1.838 (46.69) .562 (14.27) 1.150 (29.21) .890 (22.61) 1.00 (27.94) 1.343 (34.11) 16S .375 (9.53) .547 (13.89) .255 (6.48) 1.281 (32.54) .140 (3.56) 2.250 (57.15) 1.838 (46.69) .562 (14.27) 1.250 (31.75) 1.015 (25.78) 1.200 (30.48) 1.484 (37.69) 12 .625(15.88) .297 (7.54) .140 (3.56) 1.062 (26.97) .146 (3.71) 2.625 (66.68) 2.181 (55.40) .750 (19.05) .970 (24.64) .765 (19.43) .900 (22.86) 1.125 (28.58) 14 .625(15.88) .422 (10.72) .195 (4.95) 1.156 (29.36) .146 (3.71) 2.625 (66.58) 2.181 (55.40) .750 (19.05) 1.150 (29.21) .890 (22.61) 1.100 (27.94) 1.343 (34.11) 16 .625(15.88) .547 (13.89) .255 (6.48) 1.281 (32.54) .146 (3.71) 2.625 (66.58) 2.181 (55.40) .750 (19.05) 1.250 (31.75) 1.015 (25.78) 1.200 (30.48) 1.484 (37.69) 18 .625(15.88) .610 (15.49) .285 (7.24) 1.344 (34.14) .180 (4.57) 2.688 (68.28) 2.281 (55.40) .750 (19.05) 1.450 (36.83) 1.140 (28.96) 1.300 (33.02) 1.609 (40.87) 20 .625(15.88) .735 (18.67) .350 (8.89) 1.500 (38.10) .180 (4.57) 2.750 (69.85) 2.281 (55.40) .750 (19.05) 1.570 (39.88) 1.265 (32.13) 1.500 (38.10) 1.890 (48.01) 22 .625(15.88) .740 (18.80) .350 (8.89) 1.625 (41.28) .180 (4.57) 2.750 (69.85) 2.281 (55.40) .750 (19.05) 1.570 (39.88) 1.390 (35.31) 1.500 (38.10) 1.890 (48.01) 24 .625(15.88) .922 (23.42) .468 (11.89) 1.750 (44.45) .203 (5.16) 2.969 (75.44) 2.281 (55.40) .812 (20.62) 1.880 (47.75) 1.515 (38.48) 1.740 (44.20) 2.170 (55.12) 28 .625(15.88) .922 (23.42) .468 (11.89) 2.000 (50.80) .203 (5.16) 3.031 (76.99) 2.281 (55.40) .812 (20.62) 1.880 (47.75) 1.765 (44.83) 1.740 (44.20) 2.170 (55.12) 32 .625(15.88) 1.235 (31.37) .664 (15.87) 2.250 (57.15) .203 (5.16) 3.031 (76.99) 2.322 (58.98) .875 (22.23) 2.205 (56.01) 2.015 (51.18) 2.075 (52.71) 2.656 (67.46) 36 .625(15.88) 1.360 (34.54) .694 (17.63) 2.500 (63.50) .203 (5.16) 3.281 (83.34) 2.322 (58.98) .875 (22.23) 2.400 (60.96) 2.270 (57.66) 2.300 (58.42) 2.922 (74.22) *40 .625(15.88) 1.628 (41.35) .911 (23.14) 2.750 (69.85) .203 (5.16) 3.560 (89.66)† 2.427 (61.65)† .875 (22.23) 2.840 (72.14) 2.427 (61.65) 2.688 (68.28) - †Not to MS specification *Not Available in MS3101E and MS3101R. Shell Size A Thread Shell Size A Thread 8S 1/2-28UNEF-2A 16 1-20UNEF-2A 10S 5/8-24UNEF-2A 18 1-1/8-18UNEF-2A 10SL 5/8-24UNEF-2A 20 1-1/4-18UNEF-2A 12S 3/4-20UNEF-2A 22 1-3/8-18UNEF-2A 14S 7/8-20UNEF-2A 24 1-1/2-18UNEF-2A 16S 1-20UNEF-2A 28 1-3/4-18UNS-2A 12 3/4-20UNEF-2A 32 2-18UNS-2A 14 7/8-20UNEF-2A 36 2-1/4-16UN-2A 40 2-1/2-16UN-2A Performance Specifications - Page 168 Contact, Sealing Plugs, Assembly Tools - Page 187 Contact Arrangements - Page 171-174 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 175 MIL-C-5015 Connectors MS-E/F/R/ER Wall Mounting Receptacle MS3100E/MS3100F Integral Cable Clamp CA3100E/CA3100E MS3100F wall mounting receptacles are used to carry wires thru walls or bulkheads, or to provide a means of disconnection at a bulkhead. L M W MS3100F receptacles mate with 3106 and 3108 plugs. S Typ. CA3100R E V R Typ. MS3100E is identical to MS3100F and is available upon request. For new equipment, customer should specify MS3100F. MS3100R K A Thd. B T Dia. 4 Mtg. Holes The MS3100R receptacle is identical in purpose to the MS3100F. The MS3100R features a shorter light weight endbell and mates with 3106 and3108 plugs. L1 S Typ. M K R Typ. P A Thd. B T Dia. 4 Mtg. Holes L Max. L1 Max. M +.031 -.000 .102 (2.59) .125 (3.18) 2.250 (57.15) 1.838 (46.69) .562 (14.27) .890 (22.61) .594 (15.09) .875 (22.23) .120 (3.05) .840 (21.34) 1.046 (26.57) .102 (2.59) .125 (3.18) 2.250 (57.15) 1.838 (46.69) .562 (14.27) .890 (22.61) .719 (18.26) 1.000 (25.40) .120 (3.05) .840 (21.34) 1.046 (26.57) .297 (7.54) .140 (3.56) .125 (3.18) 2.250 (57.15) 1.838 (46.69) .562 (14.27) .970 (24.64) .719 (18.26) 1.000 (25.40) .120 (3.05) .900 (22.86) 1.125 (28.58) .375 (9.53) .297 (7.54) .140 (3.56) .140 (3.56) 2.250 (57.15) 1.838 (46.69) .562 (14.27) .970 (24.64) .812 (20.62) 1.094 (27.79) .120 (3.05) .900 (22.86) 1.125 (28.58) .375 (9.53) .422 (10.72) .195 (4.95) .140 (3.56) 2.250 (57.15) 1.838 (46.69) .562 (14.27) 1.150 (29.21) .906 (23.01) 1.188 (30.18) .120 (3.05) 1.100 (27.94) 1.343 (34.11) 16S .375 (9.53) .547 (13.89) .255 (6.48) .140 (3.56) 2.250 (57.15) 1.838 (46.69) .562 (14.27) 1.250 (31.75) .969 (24.61) 1.281 (32.54) .120 (3.05) 1.200 (30.48) 1.484 (37.69) 12 .625(15.88) .297 (7.54) .140 (3.56) .146 (3.71) 2.625 (66.68) 2.181 (55.40) .750 (19.05) .970 (24.64) .812 (20.62) 1.094 (27.79) .120 (3.05) 14 .625(15.88) .422 (10.72) .195 (4.95) .146 (3.71) 2.625 (66.58) 2.181 (55.40) .750 (19.05) 1.150 (29.21) .906 (23.01) 1.188 (30.18) .120 (3.05) 1.100 (27.94) 1.343 (34.11) 16 .625(15.88) .547 (13.89) .255 (6.48) .146 (3.71) 2.625 (66.58) 2.181 (55.40) .750 (19.05) 1.250 (31.75) .969 (24.61) 1.281 (32.54) .120 (3.05) 1.200 (30.48) 1.484 (37.69) 18 .625(15.88) .610 (15.49) .285 (7.24) .180 (4.57) 2.688 (68.28) 2.281 (55.40) .750 (19.05) 1.450 (36.83) 1.062 (26.97) 1.375 (34.93) .120 (3.05) 1.300 (33.02) 1.609 (40.87) 20 .625(15.88) .735 (18.67) .350 (8.89) .180 (4.57) 2.750 (69.85) 2.281 (55.40) .750 (19.05) 1.570 (39.88) 1.156 (29.36) 1.500 (38.10) .120 (3.05) 1.500 (38.10) 1.890 (48.01) 22 .625(15.88) .740 (18.80) .350 (8.89) .180 (4.57) 2.750 (69.85) 2.281 (55.40) .750 (19.05) 1.570 (39.88) 1.250 (31.75) 1.625 (41.28) .120 (3.05) 1.500 (38.10) 1.890 (48.01) 24 .625(15.88) .922 (23.42) .468 (11.89) .203 (5.16) 2.969 (75.44) 2.281 (55.40) .812 (20.62) 1.880 (47.75) 1.375 (34.93) 1.750 (44.45) .147 (3.73) 1.740 (44.20) 2.170 (55.12) 28 .625(15.88) .922 (23.42) .468 (11.89) .203 (5.16) 3.031 (76.99) 2.281 (55.40) .812 (20.62) 1.880 (47.75) 1.562 (39.67) 2.000 (50.80) .147 (3.73) 1.740 (44.20) 2.170 (55.12) 32 .625(15.88) 1.235 (31.37) .664 (15.87) .203 (5.16) 3.031 (76.99) 2.322 (58.98) .875 (22.23) 2.205 (56.01) 1.750 (44.45) 2.250 (57.15) .173 (4.39) 2.075 (52.71) 2.656 (67.46) 36 .625(15.88) 1.360 (34.54) .694 (17.63) .203 (5.16) 3.281 (83.34) 2.322 (58.98) .875 (22.23) 2.400 (60.96) 1.938 (49.23) 2.500 (63.50) .173 (4.39) 2.300 (58.42) 2.922 (74.22) *40 .625(15.88) 1.628 (41.35) .911 (23.14) .203 (5.16) 3.560 (89.66)† 2.427 (61.65)† .875 (22.23) 2.840 (72.14) 2.188 (55.58) 2.750 (69.85) .173 (4.39) 2.688 (68.28) Shell Size B Min. E Max. 8S .375 (9.53) .235 (5.97) 10S .375 (9.53) .235 (5.97) 10SL .375 (9.53) 12S 14S E Min. K Max. P Max. R + _.005 T +.010 -.005 S + _.031 V Max. W Max. .900 (22.86) 1.125 (28.58) - †Not to MS specification *Not Available in MS3101E and MS3101R. Shell Size Performance Specifications - Page 168 A Thread Shell Size A Thread 8S 1/2-28UNEF-2A 16 1-20UNEF-2A 10S 5/8-24UNEF-2A 18 1-1/8-18UNEF-2A 10SL 5/8-24UNEF-2A 20 1-1/4-18UNEF-2A 12S 3/4-20UNEF-2A 22 1-3/8-18UNEF-2A 14S 7/8-20UNEF-2A 24 1-1/2-18UNEF-2A 16S 1-20UNEF-2A 28 1-3/4-18UNS-2A 12 3/4-20UNEF-2A 32 2-18UNS-2A 14 7/8-20UNEF-2A 36 2-1/4-16UN-2A 40 2-1/2-16UN-2A Contact, Sealing Plugs, Assembly Tools - Page 187 Contact Arrangements - Page 171-174 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 176 MIL-C-5015 Connectors MS-E/F/R/ER Straight Plug MS3106E/MS3106F Integral Cable Clamp CA3106E/CA06R MS3106F straight plugs mate with 3100 and 3102 receptacles and 3101 plugs. L J** The MS3106E is available upon request. For new equipment, customer should specify. MS3106F. MS3106E is identical to MS3106F except to O ring under the coupling nut. MS3106R Shell Size CA3106R E Max. E Min. W A Thd. E P1 V The MS3106R striaght plug is identical in puropse to the MS3106F. The MS3106R has the shorter endbell. This plug will mate with 3100 and 3102 receptacles and 3101 plugs. P1 L1 J** A J** Max. L Max. L1 Max. N Max. P1 Max. N V Max. W Max. 8S .235 (5.97) .102 (2.59) .536 (13.61) 2.250 (57.15) 1.838 (46.69) .890 (22.61) .844 (21.44) .840 (21.34) 1.046 (26.57) 10S .235 (5.97) .102 (2.59) .536 (13.61) 2.250 (57.15) 1.838 (46.69) .890 (22.61) .969 (24.61) .840 (21.34) 1.046 (26.57) 10SL .297 (7.54) .140 (3.56) .536 (13.61) 2.250 (57.15) 1.838 (46.69) .970 (24.64) .969 (24.61) .900 (22.86) 1.125 (28.58) 12S .297 (7.54) .140 (3.56) .536 (13.61) 2.250 (57.15) 1.838 (46.69) .970 (24.64) 1.062 (26.97) .900 (22.86) 1.125 (28.58) 14S .422 (10.72) .195 (4.95) .536 (13.61) 2.250 (57.15) 1.838 (46.69) 1.150 (29.21) 1.156 (29.36) 1.00 (27.94) 1.343 (34.11) 16S .547 (13.89) .255 (6.48) .536 (13.61) 2.250 (57.15) 1.838 (46.69) 1.250 (31.75) 1.250 (31.75) 1.200 (30.48) 1.484 (37.69) 12 .297 (7.54) .140 (3.56) .724 (18.39) 2.625 (66.68) 2.181 (55.40) .970 (24.64) 1.062 (26.97) .900 (22.86) 1.125 (28.58) 14 .422 (10.72) .195 (4.95) .724 (18.39) 2.625 (66.68) 2.181 (55.40) 1.150 (29.21) 1.156 (29.36) 1.100 (27.94) 1.343 (34.11) 16 .547 (13.89) .255 (6.48) .724 (18.39) 2.625 (66.68) 2.181 (55.40) 1.250 (31.75) 1.250 (31.75) 1.200 (30.48) 1.484 (37.69) 18 .610 (15.49) .285 (7.24) .724 (18.39) 2.688 (68.28) 2.281 (55.40) 1.450 (36.83) 1.344 (34.14) 1.300 (33.02) 1.609 (40.87) 20 .735 (18.67) .350 (8.89) .724 (18.39) 2.750 (69.85) 2.281 (55.40) 1.570 (39.88) 1.469 (37.31) 1.500 (38.10) 1.890 (48.01) 22 .740 (18.80) .350 (8.89) .724 (18.39) 2.750 (69.85) 2.281 (55.40) 1.570 (39.88) 1.594 (40.49) 1.500 (38.10) 1.890 (48.01) 24 .922 (23.42) .468 (11.89) .724 (18.39) 2.969 (75.41) 2.281 (55.40) 1.880 (47.75) 1.719 (43.66) 1.740 (44.20) 2.170 (55.12) 28 .922 (23.42) .468 (11.89) .724 (18.39) 3.031 (76.99) 2.281 (55.40) 1.880 (47.75) 1.969 (50.01) 1.740 (44.20) 2.170 (55.12) 32 1.235 (31.37) .664 (15.87) .724 (18.39) 3.031 (76.99) 2.322 (58.98) 2.205 (56.01) 2.219 (56.36) 2.075 (52.71) 2.656 (67.46) 36 1.360 (34.54) .694 (17.63) .724 (18.39) 3.281 (83.34) 2.322 (58.98) 2.400 (60.96) 2.469 (62.71) 2.300 (58.42) 2.922 (74.22) * 40 1.628 (41.35) .911 (23.14) .724 (18.39) 3.560 (89.66)† 2.427 (61.65)† 2.840 (72.14) 2.723 (69.16)† 2.688 (68.28) - †Not to MS specification ** Barrel engaging face to shoulder. Shell Size A Thread Shell Size A Thread 8S 1/2-28UNEF-2B 16 1-20UNEF-2B 10S 5/8-24UNEF-2B 18 1-1/8-18UNEF-2B 10SL 5/8-24UNEF-2B 20 1-1/4-18UNEF-2B 12S 3/4-20UNEF-2B 22 1-3/8-18UNEF-2B 14S 7/8-20UNEF-2B 24 1-1/2-18UNEF-2B 16S 1-20UNEF-2B 28 1-3/4-18UNS-2B 12 3/4-20UNEF-2B 32 2-18UNS-2B 14 7/8-20UNEF-2B 36 2-1/4-16UN-2B 40 2-1/2-16UN-2B Performance Specifications - Page 168 Contact, Sealing Plugs, Assembly Tools - Page 187 Contact Arrangements - Page 171-174 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 177 MIL-C-5015 Connectors MS-E/F/R/ER Box Mounting Receptacle MS3102E/MS3102R CA3102E/CA3102R X DIMENSION S Max. Solder Pot Ext. - Pin or Socket Shell Size 16 Contact Size 12 8 R 4 0 8S, 10S, 10SL .534 - - - - 12S, 14S, 16S .518 - - - - 12 .705 .705 - - - 14 .705 .705 .767 - - 16 .705 .705 .767 .767 - 18 .674 .674 .736 .736 - 20,22 .674 .674 .736 .736 .971 24,28 .612 .612 .674 .674 .909 32,36 .549 .549 .611 .611 .846 MS3102E and MS3102R box mounting receptacles are used in junction boxes or as an integral part of equipment. These connectors are identical in construction and will mate with 3106, 3107 and 3108 plugs. For new equipment, customer should specify MS3102R. L T Dia. 4 Mtg. Holes M K P A Thd. (Class-2A) B Max. Solder Pot Extension X 90˚ Angle Plug MS3108E/MS3108R CA3108E/CA3108R MS3108R 90˚ angle plugs with O ring seal less cable clamp) and the MS3108E 90˚ angle plugs (less O ring seal with cable clamp) are used where there is limited space and where wires must be brought at abrupt angles. This plugs will mate with 3100 and 3102 receptacles and 3101 plugs. P 1 L3 Y J** A Thd. (Class-2B) X 1 Thread for Attachment of M85049/41 (MS3057) Cable Clamp End of Thread (MS3108R) V1 See page 185 for cable clamp dimensions. Shell Size B Min. J** Max. K Max. L Max. L3 Max. M +.031 (0.79) -.000 (0.00) P Max. P1 Max. R + _.005 T +.010 -.005 S + _.031 V1 Max. X1 Max. Y Max. 8S .375 (9.53) .536 (13.61) .125 (3.18) 1.040 (26.42) 2.156 (54.76) .562 (14.27) .426 (10.82) .844 (21.44) .594 (15.09) .875 (22.23) .120 (3.05) 1.281 (30.94) .811 (20.60) 1.640 (41.66) 10S .375 (9.53) .536 (13.61) .125 (3.18) 1.040 (26.42) 2.156 (54.76) .562 (14.27) .520 (13.21) .969 (24.61) .719 (18.26) 1.000 (25.40) .120 (3.05) 1.250 (31.75) .842 (21.39) 1.640 (41.66) 10SL .375 (9.53) .536 (13.61) .125 (3.18) 1.040 (26.42) 2.188 (55.58) .562 (14.27) .614 (15.60) .969 (24.61) .719 (18.26) 1.000 (25.40) .120 (3.05) 1.281 (32.54) .873 (22.17) 1.703 (43.26) 12S .375 (9.53) .536 (13.61) .140 (3.56) 1.040 (26.42) 2.188 (55.58) .562 (14.27) .614 (15.60) 1.062 (26.97) .812 (20.62) 1.094 (27.79) .120 (3.05) 1.281 (32.54) .873 (22.17) 1.703 (43.26) 14S .375 (9.53) .536 (13.61) .140 (3.56) 1.040 (26.42) 2.312 (58.72) .562 (14.27) .739 (18.77) 1.156 (29.36) .906 (23.01) 1.188 (30.18) .120 (3.05) 1.406 (35.71) .936 (23.77) 1.765 (44.83) 16S .375 (9.53) .536 (13.61) .140 (3.56) 1.040 (26.42) 2.406 (61.11) .562 (14.27) .864 (21.95) 1.250 (31.75) .969 (24.61) 1.281 (32.54) .120 (3.05) 1.531 (38.89) .998 (25.35) 1.796 (45.62) 12 .625(15.88) .724 (18.39) .146 (3.71) 1.400 (35.56) 2.531 (64.29) .750 (19.05) .614 (15.60) 1.062 (26.97) .812 (20.62) 1.094 (27.79) .120 (3.05) 1.281 (32.54) .873 (22.17) 2.062 (52.37) 14 .625(15.88) .724 (18.39) .146 (3.71) 1.400 (35.56) 2.688 (68.28) .750 (19.05) .739 (18.77) 1.156 (29.36) .906 (23.01) 1.188 (30.18) .120 (3.05) 1.406 (35.71) .936 (23.77) 2.125 (53.98) 16 .625(15.88) .724 (18.39) .146 (3.71) 1.400 (35.56) 2.781 (70.64) .750 (19.05) .864 (21.95) 1.250 (31.75) .969 (24.61) 1.281 (32.54) .120 (3.05) 1.531 (38.89) .998 (25.35) 2.156 (54.76) 18 .625(15.88) .724 (18.39) .180 (4.57) 1.400 (35.56) 2.844 (72.24) .750 (19.05) .989 (25.12) 1.344 (34.14) 1.062 (26.97) 1.375 (34.93) .120 (3.05) 1.593 (40.46) 1.061 (26.95) 2.250 (57.15) 20 .625(15.88) .724 (18.39) .180 (4.57) 1.400 (35.56) 3.250 (82.55) .750 (19.05) 1.145 (29.08) 1.469 (37.31) 1.156 (29.36) 1.500 (38.10) .120 (3.05) 1.656 (42.06) 1.123 (28.52) 2.312 (58.72) 22 .625(15.88) .724 (18.39) .180 (4.57) 1.400 (35.56) 3.250 (82.55) .750 (19.05) 1.270 (32.26) 1.594 (40.49) 1.250 (31.75) 1.625 (41.28) .120 (3.05) 1.718 (43.64) 1.186 (30.12) 2.312 (58.72) 24 .625(15.88) .724 (18.39) .203 (5.16) 1.400 (35.56) 3.719 (94.46) .812 (20.62) 1.395 (35.43) 1.719 (43.66) 1.375 (34.93) 1.750 (44.45) .147 (3.73) 1.890 (48.01) 1.263 (32.08) 2.531 (64.29) 28 .625(15.88) .724 (18.39) .203 (5.16) 1.400 (35.56) 3.719 (94.46) .812 (20.62) 1.614 (41.00) 1.969 (50.01) 1.562 (39.67) 2.000 (50.80) .147 (3.73) 1.968 (49.99) 1.342 (34.09) 2.531 (64.29) 32 .625(15.88) .724 (18.39) .203 (5.16) 1.400 (35.56) 4.188 (106.38) .875 (22.23) 1.864 (47.35) 2.219 (56.36) 1.750 (44.45) 2.250 (57.15) .173 (4.39) 2.187 (55.55) 1.561 (39.65) 2.750 (69.85) 36 .625(15.88) .724 (18.39) .203 (5.16) 1.400 (35.56) 4.297 (109.14) .875 (22.23) 2.051 (52.10) 2.469 (62.71) 1.938 (49.23) 2.500 (63.50) .173 (4.39) 2.406 (61.11) 1.780 (45.21) 2.875 (73.02) 40 .625(15.88) .724 (18.39) .203 (5.16) 1.400 (35.56) 7.211 (183.16)† .875 (22.23) 2.390 (60.71) 2.723 (69.16)† 2.188 (55.58) 2.750 (69.85) .173 (4.39) 5.875 (149.22) - 5.690 (144.53) †Not to MS specification ** Barrel engaging face to shoulder. A Thread Performance Specifications - Page 168 Contact, Sealing Plugs, Assembly Tools - Page 187 Contact Arrangements - Page 171-174 A Thread Shell Size Box Mounting Receptacle 90˚ Angle Plug Shell Size Box Mounting Receptacle 90˚ Angle Plug 8S 1/2-28UNEF-2A 1/2-28UNEF-2B 16 1-20UNEF-2A 1-20UNEF-2B 10S 5/8-24UNEF-2A 5/8-24UNEF-2B 18 1-1/8-18UNEF-2A 1-1/8-18UNEF-2B 10SL 5/8-24UNEF-2A 5/8-24UNEF-2B 20 1-1/4-18UNEF-2A 1-1/4-18UNEF-2B 12S 3/4-20UNEF-2A 3/4-20UNEF-2B 22 1-3/8-18UNEF-2A 1-3/8-18UNEF-2B 14S 7/8-20UNEF-2A 7/8-20UNEF-2B 24 1-1/2-18UNEF-2A 1-1/2-18UNEF-2B 16S 1-20UNEF-2A 1-20UNEF-2B 28 1-3/4-18UNS-2A 1-3/4-18UNS-2B 12 3/4-20UNEF-2A 3/4-20UNEF-2B 32 2-18UNS-2A 2-18UNS-2B 14 7/8-20UNEF-2A 7/8-20UNEF-2B 36 2-1/4-16UN-2A 2-1/4-16UN-2B 40 2-1/2-16UN-2A 2-1/2-16UN-2B Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 178 MIL-C-5015 Connectors MS-E/F/R/ER How to Order MS type potting connectors are available with nylon cups. 00 and 06 shell styles with plastic cups and resilient insulators meet the requirments of MS3103 and MS25183. Also available is the 08 plug with resilient insulator and 90˚ angle nylon potting cup. ITT Cannon provides for a 1/4" clearance for potting on all contact sizes. MS 25183 MS 3103 CA 3100 ER 18 - 10 18 - 10 18 - 10 P P P PREFIX SHELL STYLE CLASS SHELL SIZE CONTACT ARRANGEMENT CONTACT TYPE PREFIX CA - ITT Cannon prefix indicating special application or variation of MS SHELL STYLE Coupling thread diameter figured in sixteenths of an inch SHELL STYLE 3100 - Wall mounting receptacle (MS3103) 3106 - Straight plug (MS25183) 3108 - 90˚ angle plug COTNACT ARRANGEMENTS See pages 171-174 COTNACT TYPE P for Pin: S for Socket CLASS ER - Resilient insulator, nylon potting cup and thread attachment ring No class designator for MS types. Wall Mounting Receptacle MS3103 Nylon Potting Cup Threaded Attachment Ring CA3100ER S R L Polarizing Boss T Dia. 4 Mtg. Holes A Thd. The CA3100ER receptacle (MS3103) is supplied with a resilient insulator and nylon potting cup with a threaded attachment ring. This receptacle mates with 3106, 3107, and 3108 plugs. Shell Size R +.010 (+0.25) -.005 (+0.13) L Max. R + _.005 (+ _0.13) 8S 1.531 (38.89) .594 (15.09) .906 (23.01) .120 (3.05) 1/2-28UNEF-2A 10S 1.531 (38.89) .719 (18.26) 1.031 (26.19) .120 (3.05) 5/8-24NEF-2A 10SL 1.531 (38.89) .719 (18.26) 1.031 (26.19) .120 (3.05) 5/8-24NEF-2A 12S 1.531 (38.89) .812 (20.62) 1.125 (28.58) .120 (3.05) 3/4-20UNEF-2A 14S 1.531 (38.89) .906 (23.01) 1.219 (30.96) .120 (3.05) 7/8-20UNEF-2A 16S 1.531 (38.89) .969 (24.61) 1.312 (33.32) .120 (3.05) 1-20UNEF-2A 12 1.968 (49.99) .812 (20.62) 1.125 (28.58) .120 (3.05) 3/4-20UNEF-2A 14 1.968 (49.99) .906 (23.01) 1.219 (30.96) .120 (3.05) 3/4-20UNEF-2A 16 1.968 (49.99) .968 (24.59) 1.312 (33.32) .120 (3.05) 1-20UNEF-2A 18 1.968 (49.99) 1.062 (26.97) 1.406 (35.71) .120 (3.05) 1-1/8-18NEF-2A 20 2.188 (55.58) 1.156 (29.36) 1.531 (38.89) .120 (3.05) 1-1/4-18NEF-2A 22 2.188 (55.58) 1.250 (31.75) 1.656 (42.06) .120 (3.05) 1-3/8-18NEF-2A 24 2.188 (55.58) 1.375 (34.92) 1.781 (45.24) .147 (3.73) 1-1/2-18NEF-2A 28 2.188 (55.58) 1.562 (39.67) 2.031 (51.59) .147 (3.73) 1-3/4-18NS-2A 187 32 2.188 (55.58) 1.750 (44.45) 2.281 (57.94) .173 (4.39) 2-18NS-2A Contact Arrangements - Page 171-174 36 2.188 (55.58) 1.938 (49.23) 2.531 (64.29) .173 (4.39) 2-1/4-16UN-2A Performance Specifications - Page 168 Contact, Sealing Plugs, Assembly Tools - Page S Max. A Thread Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 179 MIL-C-5015 Connectors MS-E/F/R/ER Straight Plug MS25183 Nylon Potting Cup Rubber Gasket CA3106ER Lenght of Engagement Metal Potting Ring J 1/4" To end of contact Gasket A Thd. P L The CA3106ER plug is supplied with resilient insulators, nylon potting cups with threaded attachment rings, and a rubber gasket under the coupling nut. This plug mates with 3100 and 3102 receptacles and 3101 plugs. 90˚ Angle Plug Nylon Potting Cup Rubber Gasket CA3108ER P Dia. L Polarizing Groove B A Thd. D Metal Potting Ring The CA3108ER is supplied with resilent insulator, 90˚ nylon potting cup and threaded attachment ring with a rubber gasket under the coupling nut. This plug mates with 3100 and 3102 receptacles and 3101 plugs. CA3106ER CA3108ER L Max. Shell Size J Max. L Max. P Max. A Thread B Max. D Max. For Arr. w/#16 & #12 Contacts For Arr. w/#8 & #4 Contacts P Max. A Thread 8S .536 (13.61) 1.562 (39.67) .844 (21.44) 1/2-28UNEF-2B - - - - - 10S .536 (13.61) 1.562 (39.67) .969 (24.61) 5/8-24UNEF-2B - - - - - - 10SL .536 (13.61) 1.562 (39.67) .969 (24.61) 5/8-24UNEF-2B .563 (13.61) 1.040 (26.42) 1.463 (37.16) - .969 (24.61) 5/8-24UNEF-2B 12S .536 (13.61) 1.562 (39.67) 1.062 (26.97) 3/4-20UNEF-2B .563 (13.61) 1.040 (26.42) 1.600 (40.64) - 1.062 (26.97) 3/4-24UNEF-2B 14S .536 (13.61) 1.562 (39.67) 1.156 (29.36) 7/8-20UNEF-2B .563 (13.61) 1.040 (26.42) 1.600 (40.64) 2.300 (58.42) 1.156 (29.36) 7/8-20UNEF-2B 16S .536 (13.61) 1.562 (39.67) 1.250 (31.75) 1-20UNEF-2B .563 (13.61) 1.290 (32.77) 1.600 (40.64) 2.550 (64.77) 1.250 (31.75) 1-20UNEF-2B 12 .724 (18.39) 2.000 (50.80) 1.062 (26.97) 3/4-20UNEF-2B .724 (18.39) 1.040 (26.42) 1.910 (48.51) - 1.062 (26.97) 3/4-20UNEF-2B 14 .724 (18.39) 2.000 (50.80) 1.156 (29.36) 7/8-20UNEF-2B .724 (18.39) 1.040 (26.42) 1.910 (48.51) 2.610 (66.29) 1.156 (29.36) 7/8-20UNEF-2B 16 .724 (18.39) 2.000 (50.80) 1.250 (31.75) 1-20UNEF-2B .724 (18.39) 1.290 (32.77) 1.910 (48.51) 2.850 (72.39) 1.250 (31.75) 1-20UNEF-2B 18 .724 (18.39) 2.000 (50.80) 1.344 (34.14) 1-1/8-18UNEF-2B .724 (18.39) 1.290 (32.77) 2.100 (53.34) 2.850 (72.39) 1.344 (34.14) 1-1/8-18UNEF-2B 20 .724 (18.39) 2.125 (53.98) 1.469 (37.31) 1-1/4-18UNEF-2B .724 (18.39) 1.540 (39.12) 2.100 (53.34) 2.850 (72.39) 1.469 (.37.31) 1-1/4-18UNEF-2B 22 .724 (18.39) 2.125 (53.98) 1.594 (40.49) 1-3/8-18UNEF-2B .724 (18.39) 1.540 (39.12) 2.100 (53.34) 2.850 (72.39) 1.594 (40.49) 1-3/8-18UNEF-2B 24 .724 (18.39) 2.125 (53.98) 1.719 (43.66) 1-1/2-18UNEF-2B .724 (18.39) 1.790 (45.47) 2.281 (57.94) 2.985 (75.82) 1.719 (43.66) 1-1/2-18UNEF-2B 28 .724 (18.39) 2.125 (53.98) 1.969 (50.01) 1-3/4-18UNS-2B .724 (18.39) 2.040 (51.82) 2.485 (63.12) 2.985 (75.82) 1.969 (50.01) 1-3/4-18UNS-2B 32 .724 (18.39) 2.180 (55.37) 1.219 (30.96) 2-18UNS-2B .724 (18.39) 2.290 (58.17) 2.485 (63.12) 2.985 (75.82) 1.219 (30.96) 2-18UNS-2B 36 .724 (18.39) 2.180 (55.37) 2.469 (62.71) 2-1/4-16UN-2B .724 (18.39) 2.540 (64.52) 2.485 (63.12) 2.985 (75.82) 2.469 (62.71) 2-1/4-16UN-2B 40 .724 (18.39) 2.180 (55.37) 2.723 (69.16) 2-1/2-16UN-2B - Performance Specifications - Page 168 Contact, Sealing Plugs, Assembly Tools - Page 187 Contact Arrangements - Page 171-174 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 180 MIL-C-5015 Connectors MS-E/F/R/ER Components MS3106R CA3106R Straight Plug MS3106F CA06R Straight Plug MS3106E* CA3106E Straight Plug MS3108E CA3108E 90˚ Angle Plug MS3108R CA3108R 90˚ Angle Plug Endbell CABLE CLAMP Ferrule Grommet Pin Contacts Insulator Coupling Nut Barrel O Ring Note: Class F is not applicable to MS3108 shell style. * Class E inactive for new design. Use Class F or R. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 181