[ /Title (CD74 HC240 , CD74 HCT24 0, CD74 HC241 , CD74 HCT24 1, CD74 HC244 , CD74 Data sheet acquired from Harris Semiconductor SCHS167E CD54/74HC240, CD54/74HCT240, CD74HC241, CD54/74HCT241, CD54/74HC244, CD54/74HCT244 High-Speed CMOS Logic Octal Buffer/Line Drivers, Three-State November 1997 - Revised October 2004 Features Ordering Information • HC/HCT240 Inverting PART NUMBER • HC/HCT241 Non-Inverting TEMP. RANGE (oC) PACKAGE • HC/HCT244 Non-Inverting CD54HC240F3A -55 to 125 20 Ld CERDIP • Typical Propagation Delay = 8ns at VCC = 5V, CL = 15pF, TA = 25oC for HC240 CD54HC244F3A -55 to 125 20 Ld CERDIP • Three-State Outputs CD54HCT240F3A -55 to 125 20 Ld CERDIP • Buffered Inputs CD54HCT241F3A -55 to 125 20 Ld CERDIP • High-Current Bus Driver Outputs CD54HCT244F3A -55 to 125 20 Ld CERDIP CD74HC240E -55 to 125 20 Ld PDIP CD74HC240M -55 to 125 20 Ld SOIC • Wide Operating Temperature Range . . . -55oC to 125oC CD74HC240M96 -55 to 125 20 Ld SOIC • Balanced Propagation Delay and Transition Times CD74HC241E -55 to 125 20 Ld PDIP • Significant Power Reduction Compared to LSTTL Logic ICs CD74HC241M -55 to 125 20 Ld SOIC • HC Types - 2V to 6V Operation - High Noise Immunity: NIL = 30%, NIH = 30% of VCC at VCC = 5V CD74HC241M96 -55 to 125 20 Ld SOIC CD74HC244E -55 to 125 20 Ld PDIP CD74HC244M -55 to 125 20 Ld SOIC • HCT Types - 4.5V to 5.5V Operation - Direct LSTTL Input Logic Compatibility, VIL= 0.8V (Max), VIH = 2V (Min) - CMOS Input Compatibility, Il ≤ 1µA at VOL, VOH CD74HC244M96 -55 to 125 20 Ld SOIC CD74HCT240E -55 to 125 20 Ld PDIP CD74HCT240M -55 to 125 20 Ld SOIC CD74HCT240M96 -55 to 125 20 Ld SOIC Description CD74HCT240PW -55 to 125 20 Ld TSSOP The ’HC240 and ’HCT240 are inverting three-state buffers having two active-low output enables. The CD74HC241, ’HCT241, ’HC244 and ’HCT244 are non-inverting threestate buffers that differ only in that the 241 has one activehigh and one active-low output enable, and the 244 has two active-low output enables. All three types have identical pinouts. CD74HCT240PWR -55 to 125 20 Ld TSSOP CD74HCT240PWT -55 to 125 20 Ld TSSOP CD74HCT241E -55 to 125 20 Ld PDIP CD74HCT241M -55 to 125 20 Ld SOIC CD74HCT241M96 -55 to 125 20 Ld SOIC CD74HCT244E -55 to 125 20 Ld PDIP CD74HCT244M -55 to 125 20 Ld SOIC CD74HCT244M96 -55 to 125 20 Ld SOIC • Fanout (Over Temperature Range) - Standard Outputs . . . . . . . . . . . . . . . 10 LSTTL Loads - Bus Driver Outputs . . . . . . . . . . . . . 15 LSTTL Loads NOTE: When ordering, use the entire part number. The suffixes 96 and R denote tape and reel. The suffix T denotes a small-quantity reel of 250. CAUTION: These devices are sensitive to electrostatic discharge. Users should follow proper IC Handling Procedures. Copyright © 2004, Texas Instruments Incorporated 1 CD54/74HC240, CD54/74HCT240, CD74HC241, CD54/74HCT241, CD54/74HC244, CD54/74HCT244 Pinout CD54HC240, CD54HCT240, CD54HCT241, CD54HC244, CD54HCT244 (CERDIP) CD74HC240, CD74HC241, CD74HCT241, CD74HC244, CD74HCT244 (PDIP, SOIC) CD74HCT240, (PDIP, SOIC, TSSOP) TOP VIEW 240 241 244 1OE 1OE 1 1A0 1A0 2 19 2OE (241) 2OE (240, 244) 2Y3 2Y3 3 18 1Y0 1Y0 1A1 1A1 4 17 2A3 2A3 2Y2 2Y2 5 16 1Y1 1Y1 1A2 1A2 6 15 2A2 2A2 2Y1 2Y1 7 14 1Y2 1Y2 1A3 1A3 8 13 2A1 2A1 2Y0 2Y0 9 12 1Y3 1Y3 GND 10 11 2A0 2A0 GND 241 244 20 VCC 240 VCC Functional Diagram 241 AND 244 240 2 18 4 16 6 14 8 12 11 9 13 7 15 5 240 17 AND 2A3 244 241 3 1A0 1A1 1A2 1A3 2A0 2A1 2A2 1 1OE 1OE 2OE 2OE 19 2 1Y0 1Y0 1Y1 1Y1 1Y2 1Y2 1Y3 1Y3 2Y0 2Y0 2Y1 2Y1 2Y2 2Y2 2Y3 2Y3 VCC = 20 GND = 10 CD54/74HC240, CD54/74HCT240, CD74HC241, CD54/74HCT241, CD54/74HC244, CD54/74HCT244 Absolute Maximum Ratings Thermal Information DC Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to 7V DC Input Diode Current, IIK For VI < -0.5V or VI > VCC + 0.5V . . . . . . . . . . . . . . . . . . . . . .±20mA DC Output Diode Current, IOK For VO < -0.5V or VO > VCC + 0.5V . . . . . . . . . . . . . . . . . . . .±20mA DC Drain Current, per Output, IO For -0.5V < VO < VCC + 0.5V. . . . . . . . . . . . . . . . . . . . . . . . . . ±35mA DC Output Source or Sink Current per Output Pin, IO For VO > -0.5V or VO < VCC + 0.5V . . . . . . . . . . . . . . . . . . . .±25mA DC VCC or Ground Current, ICC . . . . . . . . . . . . . . . . . . . . . . . . .±70mA Thermal Resistance (Typical, Note 1) θJA E (PDIP) Package . . . . . . . . . . . . . . . . . . . . . . . . . 69oC/W M (SOIC) Package . . . . . . . . . . . . . . . . . . . . . . . . . 58oC/W PW (TSSOP) Package . . . . . . . . . . . . . . . . . . . . . . 83oC/W Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . 150oC Maximum Storage Temperature Range . . . . . . . . . .-65oC to 150oC Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . . 300oC (SOIC - Lead Tips Only) Operating Conditions Temperature Range (TA) . . . . . . . . . . . . . . . . . . . . . -55oC to 125oC Supply Voltage Range, VCC HC Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2V to 6V HCT Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.5V to 5.5V DC Input or Output Voltage, VI, VO . . . . . . . . . . . . . . . . . 0V to VCC Input Rise and Fall Time 2V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000ns (Max) 4.5V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500ns (Max) 6V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400ns (Max) CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTE: 1. The package thermal impedance is calculated in accordance wIth JESD 51-7. DC Electrical Specifications TEST CONDITIONS PARAMETER SYMBOL VI (V) VIH - 25oC IO (mA) VCC (V) -40oC TO 85oC -55oC TO 125oC MIN TYP MAX MIN MAX MIN MAX UNITS 2 1.5 - - 1.5 - 1.5 - V 4.5 3.15 - - 3.15 - 3.15 - V 6 4.2 - - 4.2 - 4.2 - V HC TYPES High Level Input Voltage Low Level Input Voltage High Level Output Voltage CMOS Loads VIL VOH - VIH or VIL High Level Output Voltage TTL Loads Low Level Output Voltage CMOS Loads VOL VIH or VIL Low Level Output Voltage TTL Loads Input Leakage Current Quiescent Device Current - - 2 - - 0.5 - 0.5 - 0.5 V 4.5 - - 1.35 - 1.35 - 1.35 V 6 - - 1.8 - 1.8 - 1.8 V -0.02 2 1.9 - - 1.9 - 1.9 - V -0.02 4.5 4.4 - - 4.4 - 4.4 - V -0.02 6 5.9 - - 5.9 - 5.9 - V -6 4.5 3.98 - - 3.84 - 3.7 - V -7.8 6 5.48 - - 5.34 - 5.2 - V 0.02 2 - - 0.1 - 0.1 - 0.1 V 0.02 4.5 - - 0.1 - 0.1 - 0.1 V 0.02 6 - - 0.1 - 0.1 - 0.1 V 6 4.5 - - 0.26 - 0.33 - 0.4 V 7.8 6 - - 0.26 - 0.33 - 0.4 V II VCC or GND - 6 - - ±0.1 - ±1 - ±1 µA ICC VCC or GND 0 6 - - 8 - 80 - 160 µA 3 CD54/74HC240, CD54/74HCT240, CD74HC241, CD54/74HCT241, CD54/74HC244, CD54/74HCT244 DC Electrical Specifications (Continued) TEST CONDITIONS 25oC -55oC TO 125oC SYMBOL VI (V) MIN TYP MAX MIN MAX MIN MAX UNITS IOZ VIL or VIH - 6 - - ±0.5 - ±0.5 - ±10 µA High Level Input Voltage VIH - - 4.5 to 5.5 2 - - 2 - 2 - V Low Level Input Voltage VIL - - 4.5 to 5.5 - - 0.8 - 0.8 - 0.8 V High Level Output Voltage CMOS Loads VOH VIH or VIL -0.02 4.5 4.4 - - 4.4 - 4.4 - V -6 4.5 3.98 - - 3.84 - 3.7 - V 0.02 4.5 - - 0.1 - 0.1 - 0.1 V 6 4.5 - - 0.26 - 0.33 - 0.4 V PARAMETER Three-State Leakage Current IO (mA) VCC (V) -40oC TO 85oC HCT TYPES High Level Output Voltage TTL Loads Low Level Output Voltage CMOS Loads VOL VIH or VIL Low Level Output Voltage TTL Loads II VCC to GND 0 5.5 - - ±0.1 - ±1 - ±1 µA ICC VCC or GND 0 5.5 - - 8 - 80 - 160 µA Additional Quiescent Device Current Per Input Pin: 1 Unit Load ∆ICC (Note 2) VCC -2.1 - 4.5 to 5.5 - 100 360 - 450 - 490 µA Three-State Leakage Current IOZ VIL or VIH - 5.5 - - ±0.5 - ±5 - ±10 µA Input Leakage Current Quiescent Device Current NOTE: 2. For dual-supply systems theoretical worst case (VI = 2.4V, VCC = 5.5V) specification is 1.8mA. HCT Input Loading Table INPUT UNIT LOADS nA0-A3 1.5 1OE 0.7 2OE 0.7 nA0-A3 0.7 1OE 0.7 2OE 1.5 nA0-A3 0.7 1OE 0.7 2OE 0.7 HCT240 HCT241 HCT244 NOTE: Unit Load is ∆ICC limit specified in DC Electrical Specifications table, e.g., 360µA max at 25oC. 4 CD54/74HC240, CD54/74HCT240, CD74HC241, CD54/74HCT241, CD54/74HC244, CD54/74HCT244 Switching Specifications PARAMETER CL = 50pF, Input tr, tf = 6ns SYMBOL TEST CONDITIONS tPLH, tPHL CL = 50pF 25oC -40oC TO 85oC -55oC TO 125oC VCC (V) MIN TYP MAX MIN TYP MAX MIN TYP 2 - - 100 - - 125 - - 150 ns 4.5 - - 20 - - 25 - - 30 ns CL = 15pF 5 - 8 - - - - - - - ns CL = 50pF 6 - - 17 - - 21 - - 26 ns CL = 50pF 2 - - 110 - - 140 - - 165 ns 4.5 - - 22 - - 28 - - 33 ns CL = 15pF 5 - 9 - - - - - - - ns CL = 50pF 6 - - 19 - - 24 - - 28 ns CL = 50pF 2 - - 110 - - 140 - - 165 ns 4.5 - - 22 - - 28 - - 33 ns CL = 15pF 5 - 9 - - - - - - - ns CL = 50pF 6 - - 19 - - 24 - - 28 ns CL = 50pF 2 - - 150 - - 190 - - 225 ns 4.5 - - 30 - - 38 - - 45 ns 5 - 12 - - - - - - - ns 6 - - 26 - - 33 - - 38 ns 2 - - 60 - - 75 - - 90 ns 4.5 - - 12 - - 15 - - 18 ns 6 - - 10 - - 13 - - 15 ns MAX UNITS HC TYPES Propagation Delay Data to Outputs HC240 Data to Outputs HC241 Data to Outputs HC244 Output Enable and Disable Time Output Transition Time tPLH, tPHL tPLH, tPHL tTHL, tTLH tTLH, tTHL CL = 50pF Input Capacitance CI CL = 50pF - 10 - 10 - - 10 - - 10 pF Three-State Output Capacitance CO CL = 50pF - - - 20 - - 20 - - 20 pF Power Dissipation Capacitance (Notes 3, 4) CPD CL = 15pF HC240 5 - 38 - - - - - - - pF HC241 5 - 34 - - - - - - - pF HC244 5 - 46 - - - - - - - pF CL = 50pF 4.5 - - 22 - - 28 - - 33 ns CL = 15pF 5 - 9 - - - - - - - ns CL = 50pF 4.5 - - 25 - - 31 - - 38 ns CL = 15pF 5 - 10 - - - - - - - ns CL = 50pF 4.5 - - 25 - - 31 - - 38 ns CL = 15pF 5 - 10 - - - - - - - ns HCT TYPES Propagation Delay Data to Outputs HCT240 tPHL, tPLH Data to Outputs HCT241 tPHL, tPLH Data to Outputs HCT244 tPHL, tPLH 5 CD54/74HC240, CD54/74HCT240, CD74HC241, CD54/74HCT241, CD54/74HC244, CD54/74HCT244 Switching Specifications CL = 50pF, Input tr, tf = 6ns (Continued) 25oC -40oC TO 85oC -55oC TO 125oC SYMBOL TEST CONDITIONS VCC (V) MIN TYP MAX MIN TYP MAX MIN TYP Output Enable and Disable Times tTLH, tTHL CL = 50pF 4.5 - - 30 - - 38 - - 45 ns Output Transition Time tTHL, tTLH CL = 50pF 4.5 - - 12 - - 15 - - 18 ns CI CL = 50pF - 10 - 10 - - 10 - - 10 pF HCT240 - 5 - 40 - - - - - - - pF HCT241 - 5 - 38 - - - - - - - pF HCT244 - 5 - 40 - - - - - - - pF PARAMETER Input Capacitance Power Dissipation Capacitance (Notes 3, 4) MAX UNITS CPD NOTES: 3. CPD is used to determine the dynamic power consumption, per channel. 4. PD = VCC2 fi (CPD + CL) where fi = Input Frequency, fO = Output Frequency, CL = Output Load Capacitance, VCC = Supply Voltage. Test Circuits and Waveforms tr = 6ns tf = 6ns VCC 90% 50% 10% INPUT GND tTLH 90% INVERTING OUTPUT tPHL FIGURE 1. HC TRANSITION TIMES AND PROPAGATION DELAY TIMES, COMBINATION LOGIC 6ns tr VCC 10% OUTPUT LOW TO OFF OUTPUT LOW TO OFF OUTPUTS ENABLED OUTPUTS DISABLED OUTPUTS ENABLED OUTPUTS ENABLED FIGURE 3. HC THREE-STATE PROPAGATION DELAY WAVEFORM 0.3 GND 1.3V 10% OUTPUT HIGH TO OFF 50% 3V tPZL tPHZ tPZH 90% 6ns 2.7 1.3 tPLZ 10% tPHZ tf GND 50% OUTPUT HIGH TO OFF 6ns OUTPUT DISABLE tPZL tPLZ tPLH FIGURE 2. HCT TRANSITION TIMES AND PROPAGATION DELAY TIMES, COMBINATION LOGIC 6ns 90% 50% tTLH 1.3V 10% tPLH tPHL GND tTHL 90% 50% 10% INVERTING OUTPUT 3V 2.7V 1.3V 0.3V INPUT tTHL OUTPUT DISABLE tf = 6ns tr = 6ns 90% tPZH 1.3V OUTPUTS DISABLED OUTPUTS ENABLED FIGURE 4. HCT THREE-STATE PROPAGATION DELAY WAVEFORM 6 CD54/74HC240, CD54/74HCT240, CD74HC241, CD54/74HCT241, CD54/74HC244, CD54/74HCT244 Test Circuits and Waveforms OTHER INPUTS TIED HIGH OR LOW OUTPUT DISABLE (Continued) IC WITH THREESTATE OUTPUT OUTPUT RL = 1kΩ CL 50pF VCC FOR tPLZ AND tPZL GND FOR tPHZ AND tPZH NOTE: Open drain waveforms tPLZ and tPZL are the same as those for three-state shown on the left. The test circuit is Output RL = 1kΩ to VCC, CL = 50pF. FIGURE 5. HC AND HCT THREE-STATE PROPAGATION DELAY TEST CIRCUIT 7 MECHANICAL DATA MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999 PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 14 PINS SHOWN 0,30 0,19 0,65 14 0,10 M 8 0,15 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 1 7 0°– 8° A 0,75 0,50 Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,10 8 14 16 20 24 28 A MAX 3,10 5,10 5,10 6,60 7,90 9,80 A MIN 2,90 4,90 4,90 6,40 7,70 9,60 DIM 4040064/F 01/97 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-153 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2004, Texas Instruments Incorporated