CKM Series • Ratings from 10A to 30A @ 60 VDC • Slim 22.5mm (width) package • Low Leakage • LED input status indicator • DC control • DIN Rail and Panel Mount PRODUCT SELECTION Description 4.5-32 VDC Control 10 A 20 A 30 A CKM0610 CKM0620 CKM0630 CKM0610 CKM0620 CKM0630 0-60 0.1 10 30 0.2 0.02 0-60 0.1 20 60 0.4 0.018 0-60 0.1 30 90 0.5 0.016 OUTPUT SPECIFICATIONS (1) Description Operating Voltage [VDC] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Maximum Load Current [Arms] Maximum Surge Current (10msec) [ADC] Maximum On-State Voltage Drop @ Rated Current [VDC] Maximum On-state Resistance @ Rated current (RDS-ON) [ohms] INPUT SPECIFICATIONS (1) Description Control Voltage Range Maximum Turn-On Voltage Minimum Turn-Off Voltage Maximum Input Current (4) Maximum Turn-On Time [msec] Maximum Turn-Off Time [msec] 4.0-32 VDC 4.0 VDC 1.0 VDC 9 mA @ 5 VDC, 11 mA @ 32 VDC (3) 1.0 1.0 GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Status Indicator Display Weight (typical) Encapsulation Terminals Maximum Wire Size: Recommended Terminal Screw Torque Range: Min. Side by Side Spacing GENERAL NOTES 1) 2) 3) 4) All parameters at 25°C unless otherwise specified. Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 Turn-on time for DC control random turn-on versions is 0.02 msec Input circuitry for DC control version incorporates active current limiter. Parameters 2500Vrms 109 Ohms 8 pF -40ºC to 80ºC -40ºC to 125ºC Green LED 10 oz. (280g) Thermally Conductive Epoxy Box Clamp Type AWG # 10 (3mm) 5.0-6.0 in lb (0.6-0.7 Nm) 0.8 inch (20mm) MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS Rev. 020309 ANNEX - ENVIROMENTAL INFORMATION