HS271DR Series XBP Assemblies • 13 & 22 amp AC output @ 40°C • Single Channel output • 4 to 32 VDC input control voltage • DIN Rail mounted • CE approved SSRs PRODUCT SELECTION Description 3-32 VDC Control 13 A 22 A HS271DR-XBPW6025 HS271DR-XBPW6060 HS271DR-XBPW6025 HS271DR-XBPW6060 24-660 1200 1.0 500 13 0.15 250 1.6 260 0.5 24-660 1200 1.0 500 22 0.15 625 1.3 1620 0.5 HS271DR-XBPW6025 HS271DR-XBPW6060 4-32 VDC 4.0 VDC 1.0 VDC 32 VDC 10mA @ 12Vdc See note 3 1/2 Cycle 1/2 Cycle 4-32 VDC 4.0 VDC 1.0 VDC 32 VDC 10mA @ 12Vdc See note 3 1/2 Cycle 1/2 Cycle OUTPUT SPECIFICATIONS (1) Description Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) Maximum Load Current [Arms] Minimum Load Current [Arms] Maximum Surge Current (16.6ms) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Maximum I²t for Fusing (8.3 msec) [A² sec] Minimum Power Factor (with Maximum Load) INPUT SPECIFICATIONS (1) Description Control Voltage Range Minimum Turn-On Voltage Minimum Turn-Off Voltage Maximum Reverse Voltage Typical Input Current Nominal Input Impeadance Maximum Turn-On Time [msec] Maximum Turn-Off Time [msec] GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Status Indicator Display Weight (typical) Encapsulation Recommended Terminal Screw Torque Range: Thermal pad installed Parameters 2500 Vrms 109 Ohms 10 pF -40 to 80˚C -40 to 125˚C Yes 0.70 lb. (319g) Themally Conductive Epoxy 6-32 Screws - 10 in/lbs. 8-32 Screws - 20 in/lbs. (Screws dry without grease) Yes GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Input circuitry for DC control version incorporates active current limiter MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS Rev. 080609 ANNEX - ENVIROMENTAL INFORMATION